Competition Cams 4732 11/32" Arbor/Pilot for Spring Seat and Valve Guide Cutters

Competition Cams 4732 11/32" Arbor/Pilot for Spring Seat

This 11/32 inch Arbor/Pilot from COMP Cams is required for use with Spring Seat Cutters and Guide Cutters. Arbor/Pilots from COMP Cams will also work with the valve guide cutters used for shortening the guide for a high lift cam or installing a COMP Cams seal for oil control.

  • Brand: Comp Cams
  • ASIN: B00062YEHW
  • UPC: 036584720102

Competition Cams 4929 Valve Spring Height Micrometer, 1.600"-2.200" Height Range

Competition Cams 4929 Valve Spring Height Micrometer, 1.600"-2.200"

COMP Cams Valve Spring Height Micrometers check installed height quickly and accurately. They install just as a valve spring and then expand to fully seat the lock and retainer to get a proper height measurement. Available to measure several height ranges.

  • Brand: Comp Cams
  • ASIN: B000CIUCXK
  • UPC: 036584720621

Competition Cams 911-16 Single Valve Springs

Competition Cams 911-16 Single Valve

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers. O.D. Dia. 1 I.D. Dia. 2 Damper Seat Load Open Load Coil Bind Rate (Lbs./In.) Titanium Retainer Steel Retainer Cup Seat Shims 1.524 1.110 Y 122 @ 1.900 309 @ 1.400 1.200 373 721, 732 1732, 741 4779* 4757

  • Brand: Comp Cams
  • ASIN: B00062ZHHI
  • UPC: 036584270188

Competition Cams 648-16 Machined Steel Race Locks, 7 degree Lock Angle for 11/32" Valve Stem Diameter

Competition Cams 648-16 Machined Steel Race Locks, 7

These single groove Machined Steel Street Locks with 7 degree lock angle and 11/32 inch valve stem size are perfect replacement locks for street applications. It is critically important to make sure valve locks match the valve size. There should always be a small gap between the two halves of the lock when they are properly positioned on the valve stem. If the two halves fit together without a gap, they are too large. If the locks fit tight to the stem and leave a gap between the middle of the lock and the O.D. of the stem, the locks are too small. Most people believe that the tang inside a valve lock holds the retainer and valve spring in place while the engine is running. This is not the case. The cross-section of material in the tang is not strong enough to withstand open spring loads of 1000 pounds. or more. The sole purpose of the tang is to temporarily locate the lock, retainer and spring relative to the valve until the taper of the retainer can nest around the outside surface of the lock. This creates a “collet” effect that binds the two together. The more spring force exerted on the retainer (as the valve opens), the more force applied by the “collet” effect to keep the retainer and lock in place.

  • Brand: Comp Cams
  • ASIN: B0014EXJXG
  • UPC: 036584069737

Competition Cams 4928 Valve Spring Height Micrometer, 1.400-1.800 Height Range by Comp Cams

Competition Cams 4928 Valve Spring Height Micrometer, 1.400-1.800

Measures 1.400 inch-1.800 inch installed height;Quickest, easiest, most accurate way to measure valve spring installed height;Install just like a spring, then is expanded until it fully seats valve, locks and retainer.;Simulated installation allows ultra precise readings;Tool is read like a micrometer and is accurate to .001 inch

  • Brand: Comp Cams
  • ASIN: B01LRIYQH6

Competition Cams 986-16 Dual Valve Spring

Competition Cams 986-16 Dual Valve

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B000CIUFNM
  • UPC: 036584272106

Competition Cams 103 Cam and Lifter Installation Lube, 5/8" fl. oz. packet

Competition Cams 103 Cam and Lifter Installation Lube,

Initial start-up is the most critical time in the life of any camshaft. COMP Cams Cam & Lifter Installation Lube is the best protective break-in lubricant on the market. Cam & Lifter Installation Lube must be spread generously on all lobes of the cam, on the bottoms of the lifters and on the distributor gear when installing a cam. Cam & Lifter Installation Lube from COMP Cams provides the instant protection you need to guard against any premature wear.

  • Brand: Comp Cams
  • ASIN: B000CIO7DG
  • UPC: 036584010050

Competition Cams 981-16 Single Valve Spring

Competition Cams 981-16 Single Valve

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B000CIUFLY
  • UPC: 036584271291

Competition Cams 4758-2 Checking Springs

Competition Cams 4758-2 Checking

COMP Cams Checking Springs are low tension and can be installed by hand in place of the valve springs. They simplify measuring piston-to-valve clearance and rocker ratio. They are sold in sets of two.

  • Brand: Comp Cams
  • ASIN: B000CIO9W0
  • UPC: 036584057901

Competition Cams 26918CS-KIT LS Engine Beehive Valve Spring Kit

Competition Cams 26918CS-KIT LS Engine Beehive Valve Spring

This Beehive Valve Spring Kit for LS engines is designed for hydraulic roller cams and includes carefully matched Beehive Springs, steel retainers, locks, seals and spring seats. With a .625" maximum lift, these Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Kit Includes: 26918-16 Beehive Valve Springs 774-16 Steel Retainers 623-16 7 degree Steel Valve Locks 511-16 Valve Seals 4705-16 Spring Seats

  • Brand: Comp Cams
  • ASIN: B003NNWCS4
  • UPC: 036584225485

Competition Cams 4757 1.500" Valve Spring Shim Kit

Competition Cams 4757 1.500" Valve Spring Shim

This shim kit contains .015 inch, .030 inch and .060 inch thick Valve Spring Shims with 1.500 inch outside diameter and .645 inch inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat treated to stand up to radical cam lobes. Kits are also available.

  • Brand: Comp Cams
  • ASIN: B000CIS8DQ
  • UPC: 036584393054

Competition Cams 744-16 Steel Retainers, 7 degree Angle for 1.437-1.500 Diameter Valve Springs, 3/8 Valve Stem by Comp Cams

Competition Cams 744-16 Steel Retainers, 7 degree Angle

7 degree retainers for 1.437 inch-1.500 inch diameter valve springs;O.D. - 1.400 inch, Step 1 - 1.060 inch, Step 2 - .690 inch;Precision machined from 4140 chromemoly steel and finished in black oxide;Designed for positive location when combined with COMP Cams high-quality valve springs

  • Brand: Comp Cams
  • ASIN: B01LRIY7DY

Competition Cams 26113-16 Beehive Valve Spring for Ford 4.6L and 5.4L Modular 2 Valve Engines

Competition Cams 26113-16 Beehive Valve Spring for Ford

With a .550 inch maximum lift, these Beehive Valve Springs were designed for Ford 4.6L and 5.4L Modular 2 and 3 Valve engines. COMP Cams Beehive Valve Springs deliver increased valve train stability and a much lighter valve train. This is achieved with less spring pressure for better valve control and reduced weight of both the spring and retainer. The unique Beehive shape handles valve train stress more efficiently to eliminate damaging harmonics and increases high RPM horsepower and durability. The oval/multi-arc wire shape places the maximum area of the wire at the point of highest stress to handle valve train stress more efficiently and allow better heat dissipation for longer life. Because of the unique Beehive design, the valve train can handle more RPM and more aggressive cam profiles.

  • Brand: Comp Cams
  • ASIN: B000CIUBGS
  • UPC: 036584044376

Competition Cams 787-16 Steel Retainers, 7 degree Angle for 26915 and 26918 Beehive Springs

Competition Cams 787-16 Steel Retainers, 7 degree Angle

This 7 degree steel retainer for #26915 or #26918 Valve Springs in Non Gen III Engines is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

  • Brand: Comp Cams
  • ASIN: B000CIOBK0
  • UPC: 036584061243

Competition Cams 987-16 Dual Valve Spring

Competition Cams 987-16 Dual Valve

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B000CIQCKM
  • UPC: 036584272144

Competition Cams 910-16 Single Valve Springs

Competition Cams 910-16 Single Valve

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B00062YGWU
  • UPC: 036584270157

Competition Cams 611-16 Steel Super Locks, 10 degree Lock Angle for 11/32" Valve Stem Diameter with Lash Cap Recess

Competition Cams 611-16 Steel Super Locks, 10 degree

These Steel Super Locksfeaturing a lash cap recess, 10 degree lock angle and 11/32 inch valve stem size are recommended for all race applications. Super Lockshave a wider angle (10 degree) that better distributes the ever increasing valve spring loads over the retainer than typical 7 degree locks. Precision-machined out of super-tough, fatigue-resistant metal alloy, Super Locksfit any COMP Cams 10 degree retainer.

  • Brand: Comp Cams
  • ASIN: B000CIUDFC
  • UPC: 036584160083

Competition Cams 924-16 Dual Valve Spring

Competition Cams 924-16 Dual Valve

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B000CIQC9S
  • UPC: 036584271840

Competition Cams 4753 1.250" Valve Spring Shim Kit

Competition Cams 4753 1.250" Valve Spring Shim

This shim kit contains .015 inch, .030 inch and .060 inch thick Valve Spring Shims with 1.250 inch outside diameter and .814 inch inside diameter are used to equalize the installed height of valve springs. Made from the highest quality shim stock, these shims are heat treated to stand up to radical cam lobes. Kits are also available.

  • Brand: Comp Cams
  • ASIN: B000CIUCIA
  • UPC: 036584391722

Competition Cams 748-16 Steel Retainers, 10 degree Angle for 1.500"-1.550" Diameter Valve Springs

Competition Cams 748-16 Steel Retainers, 10 degree Angle

Valve springs with larger diameters require retainers to handle the higher pressures developed by the springs. COMP Cams steel retainers are the perfect solution. This 10 degree Super Locksteel retainer is precision machined from 4140 chromemoly steel and finished in black oxide. This precision retainer is specifically designed for positive location when combined with COMP Cams high-quality valve springs.

  • Brand: Comp Cams
  • ASIN: B000CIUDT8
  • UPC: 036584200376

Competition Cams 926-16 Single Valve Spring

Competition Cams 926-16 Single Valve

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B00062Z098
  • UPC: 036584270409

Competition Cams 972-16 Single Valve Spring

Competition Cams 972-16 Single Valve

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B00062ZH32
  • UPC: 036584271017

Competition Cams 901-16 Single Valve Springs

Competition Cams 901-16 Single Valve

Single Outer Valve Springs from COMP Cams allow you to build the perfect spring assembly for your application. The valve spring creation process is far more involved than most people realize. Selecting the right metal stock and creating the best design is not done by chance. COMP Cams has developed a process that creates the highest quality valve spring available. The result is a product that meets and exceeds the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B00062YCJM
  • UPC: 036584270034

Competition Cams 995-16 Dual Valve Spring

Competition Cams 995-16 Dual Valve

Dual Valve Springs from COMP Cams are manufactured from Super Cleanwire and subject to extensive quality control testing to deliver a valve spring assembly with superior strength, durability and valve train stability, no matter what the application. The dual spring design creates a stronger valve spring that can easily handle the increased lift found in extreme stress applications. COMP Cams Dual Valve Springs exceed the expectations of today’s engine builders and racers.

  • Brand: Comp Cams
  • ASIN: B000CEM5DY
  • UPC: 036584272229
Similar Valve Springs Competition Cams Results
Valve Springs Competition Cams Video Reviews

COMP Cams® Quick Tech: How To Properly Handle Valve Springs

Valve Springs Competition Cams

http://www.compcams.com/ COMP Cams® R&D Engineer, Bradley Brown, gives out pointers on how to pro...

Tags: COMP Cams,Quick Tech,Valve Train,Valve Springs,...

COMP Cams® Quick Tech: Valve Spring Seat & Valve Guide Cutting Tools

Valve Springs Competition Cams

This Quick Tech Video from COMP Cams® demonstrates how easy it is to use Valve Spring Seat Cutter...

Tags: valve spring seat cutter,valve guide cutter,gui...

Quick Tech: Proper Valve Spring Set Up

Valve Springs Competition Cams

COMP Cams Valve Spring Engineer, Brad Brown, takes us through the basic yet extremely important s...

Tags: comp cams,valve spring,set up,quick tech,spring...

Installing the new Comp Cam valve springs on the LS swap. So it can handle turbo power.

Valve Springs Competition Cams

The heads got surfaced, pressure checked, and then new Comp Cam valve spring kit was installed. ...

Tags: comp cams,chevrolet (brand),forced induction,va...

13' DODGE SRT8 6.4 HEMI ENGINE BUILD!! COMP CAM, COMP VALVE SPRINGS, MDS DELETE

Valve Springs Competition Cams

A customer was referred to us that had a 2013 Dodge Charger SRT8 6.4 Hemi that was having some co...

Tags: Hemi,Dodge,6.4,Hemi rebuild,srt8,srt8 rebuild,s...