JEGS 60401 Torque Converter

JEGS 60401 Torque

Torque ConverterGM TH350/TH40010.75"/11.5" Dual Bolt CircleStall Speed: 2700-3000 RPM Please Note: Converter diameter may vary based on Core AvailabilityDoes not fit lock-up converter or clutch converter modelsFor Big Block applications, use JEGS XHD ConvertersFluid Capacity ChartPerformance Torque ConverterGeneral Application Chart *Advertised Camshaft DurationRear Gear RatioEngine RPM Range & Compression RatioConverter RPM Stall Speeds **Stock to 260°Stock to 3.231000-46008 to 9.51500 to 1700Stock to 265°Stock to 3.231400-50008 to 9.51600 to 1800265° to 280°3.00 to 3.731600-60009.5 to 10.52200 to 2400280° to 300°3.55 to 4.562000-65009.5 to 113000 to 3400280° to 310°3.73 to 4.882800-700010 to 11.53500 to 3800290°+3.73+3400-800010.5 to 123500+*This chart is a guideline. The stall speed may vary in your application.**Recommended for use with Small Block engines...

  • Brand: JEGS
  • ASIN: B078WHF9DV
  • UPC: 012657001200

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1963-1972 CHEVY AND GMC TRUCK'S WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, C10 C20 C30 C15 C25 C35 1000 1500 2500 3500 3000 3500 C1500 C2500 C3500

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1963-1972

This Southwest Speed Bolt-in Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1963-1972 Chevy and GMC Truck. This Crossmember Will Also Work With GM Manual Transmissions Including Later Model Muncie and Saginaw 3 and 4 Speed Manual Transmissions. This Isn't A Universal Fit Unit. This Is A Direct Bolt-in For The 1967-1972 Chevy and GMC Trucks, But Will Require Drilling The Mounting Holes On The 1963-1966 Chevy and GMC Trucks. The Tubular Crossmember Also Increases Exhaust Pipe Clearance In Critical Areas. This Crossmember Is Shipped Complete And Includes The Necessary Hardware To Mount The Crossmember. Crossmember Requires The Use Of The Polyurethane Or Stock Rubber Tail Housing Mount (not Included). Features: Made From Heavy Gauge Steel Tubing Includes Mounting Hardware Pictured Black Powder Coated To Resist Corrosion Crossmember Specs: Overall Length: 33 1/8" Tube Length End-to-end: 29 3/8" Crossmember Tube Outside Diameter: 1 5/8" Mounting Hardware Specs: Four Mounting Bolts With Nuts & Washers, Crossmember To Frame Rails Two Mounting Bolts With Flat Washers And Lock Washers, Center Crossmember To Tail Housing Mount Applications: 1963-1972 Chevy C10 Pickup 1963-1972 Chevy C20 Pickup 1963-1972 Chevy...

  • Color: 400-7096
  • Brand: Southwest Speed
  • ASIN: B010GQEBFW

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE MOUNT FOR 1963-1972 CHEVY AND GMC TRUCK'S WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, C10 C20 C30 C15 C25 C35 1000 1500 2500 3500 3000 3500 C1500 C2500 C3500

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER AND POLYURETHANE

Brand New Southwest Speed Bolt-in Tubular Transmission Crossmember and Polyurethane Mount For 1963-1972 Chevy and GMC Trucks (SWS Part # 400-7096 And # 400-7031). Kit Includes: Southwest Speed 1963-1972 Chevy and GMC Truck Bolt-in Tubular Transmission Crossmember (SWS # 400-7096) Made From Heavy Gauge Steel Tubing Includes Mounting Hardware Pictured Black Powder Coated To Resist Corrosion Southwest Speed Polyurethane Transmission Mount (SWS # 400-7031) Black Performance Polyurethane Will Outlast Traditional Rubber Mounts Zinc Finish Crossmember Specs: Overall Length: 33 1/8" Tube Length End-to-end: 29 3/8" Crossmember Tube Outside Diameter: 1 5/8" Mounting Hardware Specs: Four Mounting Bolts With Nuts & Washers, Crossmember To Frame Rails Two Mounting Bolts With Flat Washers And Lock Washers, Center Crossmember To Tail Housing Mount

  • Color: 400-7096_7031
  • Brand: Southwest Speed
  • ASIN: B010GQEEFY

GM Transmission Shifter Seal Remover Installer Turbo 300 350 400 700-R4 4L60 Includes Seal

GM Transmission Shifter Seal Remover Installer Turbo 300

Brand New -Steel construction Kit includes Seal This tool is mandatory to remove the leaky seal around the shifter selector shaft mechanism through the transmission case. This handy tool will let you remove and insert the seal without removing the tranny pan or in most cases without even lowering the transmission. The tool goes over the shaft, threads onto the leaky seal (counterclockwise) engaging the seal with the tool LH threads, then with the hex bolt turned the seal is efficiently removed intact. The new seal is put over the shifter shaft and with the dowel tool pushed into place completing the installation. Fits GM 200, 200C, 200-4R TURBO 350, 350C TURBO 400, 425, 475 GM 700-R4 GM 4L60 GM Allison - 540 In most cases this tool can be used without lowering the transmission or removing the transmission pan.

  • Brand: PMD Products
  • ASIN: B0153WO9WO

TADD TD2-3-6081X GM Turbo 350, TH 350 / 700R4 Transmission Slip Yoke 2-3-6081X

TADD TD2-3-6081X GM Turbo 350, TH 350 /

This is a NEW 26 based on 27 Spline GM Slip Yoke.This yoke has 26 splines in the yoke and 27 on the transmission output. This Popular GM Transmission Slip Yoke is 5.469" long from the end of the barrell to the center of the u-joint. It uses a 1310 Series U-Joint (TD329) and is 3.218" wide with 1.062" caps using outside clips and is stock on many older GM model applications. This Slip Yoke comes with a 90 day Warranty. Warranty valid under normal use only (racing, engine modification, suspension alteration ect.) will void warranty. If you have any questions concerning our products, please message us directly through Amazon and we'll be happy to assist you!:

  • Brand: Unknown
  • ASIN: B01BKO1N32
  • UPC: 692193958260

Fastshafts Turbo 350 (T350-HP) GM 1310 Transmission Slip Yoke

Fastshafts Turbo 350 (T350-HP) GM 1310 Transmission Slip

Brand New T350-HP 1310 Turbo 350 Transmission Slip Yoke Spline: 27 (26 based on 27) Length: 5.500" center-to-end. Similar to Dana Spicer 2-3-6081X 4L60, 4L60E T350 Stock appearing and length Total Height: 6.125" Stock Barrel Length (a): 3.625" Cap Size/Diameter (b): 1.0625 (1 1/16") U-Joint Application/Style (c): 1310 width of 3.219" (3 7/32") Center of U-Joint to End Height (d): 5.500" Barrel Size/Diameter (e): 1.5" Sold Individually U-Joint, Bearing Caps & Straps Not Included Until recently, these yokes were extremely hard to find NEW - we provide proven high performance race quality yokes never used. Quantity Discounts Available! Dana / Spicer equivalent 2-3-6081X. T350 Wide Angle can be found by searching this product ASIN: B01N5USONE

  • Color: Silver
  • Brand: Fastshafts
  • ASIN: B01NAYOSU0

PMD Products Shifter Seal fits GM Transmission Turbo 350 400 425 700-R4 TH200 TH325 4L60 4L80E 6L80E AT540 MT640

PMD Products Shifter Seal fits GM Transmission Turbo

Description .752 inch outside X .501 inch inside diameter. Fits GM 200, 200C, 200-4R TURBO 350, 350C TURBO 400, 425, 475 GM 700-R4 GM 4L60 Allison - 540 This seal does not fit TH180, 4L30E OR ANY front wheel drive GM transmissions.

  • Brand: PMD Products
  • ASIN: B01BCQAGFE

For GM Chevy Turbo 350 Polished Aluminum Transmission Pan with Gasket Stock Capacity TH350

For GM Chevy Turbo 350 Polished Aluminum Transmission

Description:--The pan depth is 2.5 inches inside, add a 1/4 inch for total outside depth. This is possibly deeper than a stock pan, so be sure you have sufficient ground clearance.--Fits GM TURBO 350 TRANSMISSIONS--Finned-style design ,better for cooling

  • Brand: DEMOTOR
  • ASIN: B06W57N4P3

Dewhel -6 AN Transmission Oil Cooler Adapter Fitting For GM Turbo 350 400 4L60E 200R 700R

Dewhel -6 AN Transmission Oil Cooler Adapter Fitting

-6 AN Transmission Oil Cooler Adapter Fitting GM Turbo 350 400 4L60E 200R 700R-6AN to 1/4NPS GM Transmission Cooler Fittings with Sealing Gasket

  • Color: AN6
  • Brand: DEWHEL
  • ASIN: B078KP35DB
  • UPC: 642534202026

CFR Performance Chevy/GM Turbo TH-350/TH-400 Chrome Steel Flywheel/Flexplate Cover

CFR Performance Chevy/GM Turbo TH-350/TH-400 Chrome Steel Flywheel/Flexplate

CFR Performance Chevy/GM chrome steel flywheel/flexplate dust cover fits Chevy/GM Turbo TH-350 and Chevy/GM Turbo TH-400 transmissions. Because different versions of the th350/400 transmission exist with different bolt spacing's, we recommend measuring your existing cover first before Purchasing.

  • Brand: CFR Performance
  • ASIN: B002UM73GA

Inline Tube THS01 Compatible With 1964-86 T-400 Turbo 400 350 Transmission Trans Lines Universal 5/16 Tubes 1/2-20 (M 2 8)

Inline Tube THS01 Compatible With 1964-86 T-400 Turbo

Pn# - THS01 - 1964-86 GM Turbo 400 350, 700r4, 200r4 Universial Transmission Lines - tubes 1/2-20 Fittings, 4'-2" of rubber hose and the 14" end tubes that fit most radiators and transmissions. Or for aftermarket transmission coolers. This is a universal transmission cooler line set. It comes with the metal hard lines for the transmission ends bent with the correct 120 degree bends with 1/2-20 fittings and 5/16" tubing, and the radiator end with one straight for the lower port and the bent one for the upper again with 1/2-20 fittings on the one end and hose bead on the other end. Install these 4 pieces and then figure out how much hose is needed between and use the supplied crimp clips to connect the rubber transmission pressure hose to the metal hard line. The clamps can be crimped with side cutting pliers or a crimp tool. There is 4'-2" of specific transmission hose that is enough for 99% of applications. These are the details that separate the first place cars from the rest. Please view my other exclusive EBAY items at MotorCityMuscleCar or inline tube. Applications: ALL GM applications with T350, T400, 700r4, 200r4 transmissions 1964-77 Chevelle, GTO, 442, GS, El Camino 1970-88 Monte Carlo, 1969-72 Grand Prix 1967-92 Camaro, Firebird, 66-74 Nova 1970-78 Firebird / Trans Am / ...

  • Brand: Inline Tube
  • ASIN: B07J6PJS73

GM TH-350/TH-400 Flywheel/Flexplate Dust Cover, Black

GM TH-350/TH-400 Flywheel/Flexplate Dust Cover,

Keep debris, dirt, and grime out of your transmission with this flywheel/flexplate dust cover. GM TH-350/TH-400 Black Sold each

  • Brand: Speedway Motors
  • ASIN: B07B8W4RLT

For GM Chevy Turbo 350 Polished Aluminum Transmission Pan Stock Capacity TH350

For GM Chevy Turbo 350 Polished Aluminum Transmission

Description:--The pan depth is 2.5 inches inside, add a 1/4 inch for total outside depth. This is possibly deeper than a stock pan, so be sure you have sufficient ground clearance.--Fits GM TURBO 350 TRANSMISSIONS--Finned-style design ,better for cooling

  • Brand: DEMOTOR
  • ASIN: B00UI0S0HM

Machine Supplies 2X 6AN Transmission Oil Cooler Adapter Fit GM Turbo 350 400 700R 4L60E

Machine Supplies 2X 6AN Transmission Oil Cooler Adapter

  • Brand: Machine Supplies
  • ASIN: B07SR92GVN

Transmission Oil Cooler Adapter Fit GM Turbo 350 400 700R 4L60E 2PCS 1/4 To AN6

Transmission Oil Cooler Adapter Fit GM Turbo 350

Product Description Product Description Item Specification. Condition: 100% new and high quality. Shipment: US Free shipment & Fast Delivery. Material: Aluminum Alloy. 6 x 1/4NPS is the correct size for GM turbo 350, Turbo 400, 700R4, 4L60E and many other GM transmissions. These have a straight thread and seal on the gasket. Package list: 2*Transmission Oil Cooler Adapter Fittings(with gaskets). NOTES: These are black anodized in color. Not for GM Powerglides.

  • Brand: imvera
  • ASIN: B07TB85K5T

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1955-1957 CHEVY WITH POWERGLIDE, TURBO TH 350, TH 400, 700R4, MUNCIE, SAGINAW, 3 & 4 SPEED, TRIM-TO-FIT TRANSMISSION MOUNT WITH HARDWARE, TRI-5, BEL AIR, 150, 210, NOMAD, SEDAN DELIVERY, DELRAY

NEW SOUTHWEST SPEED TUBULAR TRANSMISSION CROSSMEMBER FOR 1955-1957

Brand New Southwest Speed Bolt-in Tubular Transmission Crossmember (SWS Part # 400-7084). This Southwest Speed Bolt-In Tubular Transmission Crossmember Is For Installing A Powerglide, TH350, TH400, Or 700R4 Automatic Transmission In A 1955, 1956, 1957 Chevrolet 150, 210, Delray, Belair, Sedan Delivery, And Nomad Unfortunately, It Will Not Work With Any Of The Convertible Frames That Have The X-Braced Frame, That Encases The Drive Shaft This Crossmember Will Also Work With GM Manual Transmissions Including Later Model Muncie And Saginaw, 3 And 4 Speed Manual Transmissions And Allows The Use Of Bellhousings That Don't Have The Rear Engine Mounts On The Bottom Of The Bellhousing This Is Extremely Helpful When You Are Trying To Install Newer Model Engine And Transmission Combinations In The 55-57 Chevy This Crossmember Moves The Rear Engine/transmission Mounting Location From The Bottom Of The Bellhousing To The Tail Housing On The Transmission And Will Work With Either The Stock Rubber Or Urethane Tail Housing Mounts To Isolate Vibrations This Isn't A Universal Fit Unit This Is A Direct Bolt-In And Also Increases Exhaust Pipe Clearance In Critical Areas Features: Adjustable Mounting Brackets Made From Heavy Gauge Steel Tubing Includes All Hardware To Mount Crossmember ...

  • Color: 400-7084
  • Brand: Southwest Speed
  • ASIN: B010GQE832

got overhaul? - Stainless Steel 12oz Camping Mug, Black

got overhaul? - Stainless Steel 12oz Camping Mug,

When you are feeling saucy and you need something to say it without saying it, grab this camping mug and fill it with your favorite liquid. It should be alcohol but if that is not your fancy, do as you please.

  • Color: Black
  • Brand: Molandra Products
  • ASIN: B07NC9KDS5

TADD TD3R-3-6081X GM Turbo 350, TH350 / 700R4 Transmission Slip Yoke, Saginaw 3R

TADD TD3R-3-6081X GM Turbo 350, TH350 / 700R4

This is a NEW 26 based on 27 Spline GM Slip Yoke. This Popular GM Transmission Slip Yoke is 5.469" long. It uses a Saginaw S44 / Mechanics Series U-Joint (TD-534) and is 3.563" wide with 1.125" caps using inside clips and is stock on many GM model applications. This Slip Yoke comes with a 90 day Warranty. Warranty valid under normal use only (racing, engine modification, suspension alteration ect.) will void warranty. If you have any questions concerning our products, please message us directly through Amazon and we'll be happy to assist you!

  • Brand: Unknown
  • ASIN: B01BKO1HCY
  • UPC: 692193958376

GM Universal Transmission Mount for TH350 TH400 700R4 4L60E 4L80E Auto Truck RWD

GM Universal Transmission Mount for TH350 TH400 700R4

NOTE: in the reviews of this mount a customer was shipped a mount with off-cast mount holes. We now check every mount before sending to Amazon for Prime shipping. The off-cast mount was replaced for the buyer. Quality rubber universal transmission mount for Chevy/GM vehicles using Turbo 350, 400, 700R4, 4L60E, and 4L80E. This is a quality aftermarket rubber mount made in Korea. It does not transmit harsh vibrations like many of the harder mounts. Will work in most GM rear wheel drive vehicles (both car and truck). The mounting holes in the steel portion range from 3 5/8" to 4 9/16". The bolt holes in the rubber portion are spaced approximately 1.5" center to center. Partial list of vehicles fit: BUICK CENTURION 1972-1973 BUICK LESABRE 1966-1967 BUICK SKYLARK 1971-1972 CHEVROLET BEL AIR 1962-1973 CHEVROLET BISCAYNE 1962-1972 CHEVROLET BLAZER 1969-1974 CHEVROLET BROOKWOOD 1969-1972 CHEVROLET C10 PICKUP 1969-1981 CHEVROLET C10 SUBURBAN 1968-1976 CHEVROLET C20 PICKUP 1969-1981 CHEVROLET C20 SUBURBAN 1968-1980 CHEVROLET C30 PICKUP 1969-1981 CHEVROLET CAMARO 1967-1975 CHEVROLET CAPRICE 1966-1972 CHEVROLET CHEVELLE 1967-1972 CHEVROLET CORVETTE 1966-1982 CHEVROLET EL CAMINO 1964-1974 CHEVROLET G10 1975-1982 CHEVROLET G20 1975-1980 CHEVROLET G30 1975-1980 CHEVROLET IMPALA 1962-1973 CHEVRO...

  • Brand: S.L.
  • ASIN: B01CHHGCDC
  • UPC: 731525510933

Spectre Performance 2438 TH350 Kickdown Cable

Spectre Performance 2438 TH350 Kickdown

The Spectre TH350 Kickdown Cable features braided stainless steel and is designed for General Motors vehicles with a TH350 transmission. This fully adjustable cable is best used with Spectre’s throttle cable bracket part number 24283 and is easy to install with no special tools or skills required. The inner cable is 4 feet 5 inches long and the outer braided housing is 2 feet 6 inches long.

  • Color: No
  • Brand: Spectre Performance
  • ASIN: B004AJ18XU
  • UPC: 089601243801
Similar Turbo 350 700r4 Results
Turbo 350 700r4 Video Reviews

TH400 to 700R4 Conversion | In Depth How To

Turbo 350 700r4

We join the original MonStar, Curt, in the garage today as he shows us how to convert from a orig...

Tags: monstertrans,monstertransmission,mt,eatmyshift,...

Fitting a Turbo 350 or 700R4 transmission into a 1947-1953 Chevy Pickup

Turbo 350 700r4

The goal of our 1953 Chevy pickup build was to create a highway cruiser that was a better version...

Tags: 350 transmission,700r4 transmission,1st series ...

700r4 to TH350 Swap not as easy as you think!

Turbo 350 700r4

I finally had the 700r4 swapped for a TH350 and it didn't go so well.

Tags:

700r4 transmision swap

Turbo 350 700r4

removing blown up 700r4 and installing a performance built transmission in the 400hp chevy engine...

Tags: 700r4,transmission,700r4 transmission,swap,tran...

TH350/TH400 to 700R4 Conversion

Turbo 350 700r4

Tags: TH350,TH400,700R4,700R4 Conversion,transmission...