Neiko 03044A Mini Ratcheting Offset Screwdriver and Bit Set, Pocket Size Close-Quarters ,1/4-Inch Drive

Neiko 03044A Mini Ratcheting Offset Screwdriver and Bit

Set comes with the following pieces: 7 x 1” bits in an organizer: 3-pc Phillips (#1, #2 and #3), 2-pc slotted (4.5mm and 7mm), and 2-pc torx star (T15 and T20)

  • Color: Multi
  • Brand: Neiko
  • ASIN: B000XYOUS6
  • UPC: 716080050940

Chapman MFG 9600DT Desert Tan Starter Slotted Gunsmith/Dental/Lab USA Made Offset Screwdriver & Ratchet tools Set

Chapman MFG 9600DT Desert Tan Starter Slotted Gunsmith/Dental/Lab

Chapman hand tools are made in Durham, CT from American made materials. 1 ALLEN HEX insert bit in the following sizes:.050" 14 SLOTTED HOLLOW GROUND BITS in sizes ranging from .125" wide x .023" thick to .375" wide x .050" thick Includes 2 of the smallest slotted insert bits- often the most used 2 PHILLIPS INSERT BITS: size #1 and #2 Each Chapman adapter bit is designed to be used within a specific torque range for that size. • Small bits are designed for less torque, large bits are designed for more torque. Chapman adapter bits are tough, not brittle. • We use fine alloy steel that is heated treated and treated with black oxide to achieve a specific hardness, between Rc52 and Rc55 respective to the specific bit. Adapter bits that are too hard will shatter, bits that are too soft will twist. Our smallest slotted bits, CM-88, CM-89, CM-90 are designed for use within a specific torque range. • Chapman tools are used by gunsmiths, machinists and hobbyists world wide to work on fine antique firearms, machines and equipment where marring or damaging a screw head would be disastrous. When using any insert bit, specifically the 88,89,90, if a screw is seated so tightly that the bit starts to bend -stop immediately- additional force may break the bit, rip off the screw head o...

  • Color: Desert tan
  • Brand: Chapman MFG
  • ASIN: B015TBI7IG

Olsa Tools Magnetic Screwdriver Organizer | Premium Quality Tool Holder | Fits up to 16 Screwdrivers

Olsa Tools Magnetic Screwdriver Organizer | Premium Quality

Where is "the" screwdriver you need when you try to find it? Are all your screwdrivers in one spot but unorganized therefore wasting your valuable time searching for the right one? Maybe you've just lost them? Whatever your situation, you do not have to be unprepared. The Olsa Tools Magnetic Screwdriver Holder holds up to 16 screwdrivers so that you never lose them again! It also allows for a quick find of "the" tool you need when you need it! Holds all your various screwdrivers or small tools in one place and makes it easy to put on and remove The clips hold the screwdrivers tightly in place. This organizer offers plenty of space for long, short, stubby, or off-set screwdrivers or even your spanners, extensions, ratchets, pliers and other small tools. This tray is a great addition to tool chests of professionals and serious DIY mechanics, and a very useful thing to have in every home. What's included ? -(1) Magnetic Screwdriver Holder with 16 clips *SCREWDRIVERS NOT INCLUDED Organize your tools so you quickly find the one you need! The Olsa Tools Magnetic Screwdriver Holder will hold all your screwdrivers in place Click the "Add to Cart" button NOW to get your Olsa Tools Magnetic Screwdriver Organizer

  • Color: RED ORGANIZER / BLACK CLIPS
  • Brand: Olsa Tools
  • ASIN: B01ES415WK
  • UPC: 753510097038

Performance Tool W30980 2pc Offset Screwdriver Set

Performance Tool W30980 2pc Offset Screwdriver

Sizes: #1 Phillips x 3/16 in. slotted and #2 Phillips x 1/4 in. slotted Heat-treated carbon steel construction. Corrosion-resistant chrome plated finish. Non-slip knurled handles. For hard to reach fasteners.

  • Brand: Wilmar
  • ASIN: B00EDSNKUM
  • UPC: 039564046179

3 pc USA Craftsman Offset, Bent, Right Angle Screwdriver Set

3 pc USA Craftsman Offset, Bent, Right Angle

3 pc Craftsman Offset Screwdriver Set. #1 and #2 phillips. 1/4" x 1/4" slotted. 1/4" slotted x #2 phillips.

  • Brand: Craftsman
  • ASIN: B00PSPTSAK
  • UPC: 051218900798

Titan Tools 11207 Offset Micro Bit Driver

Titan Tools 11207 Offset Micro Bit

Titan Offset Micro Bit Driver features an off set micro bit driver. It includes (1) hex bit ratchet and (1) 2 Phillip bit. It is great for use in today's increasingly compact cars. It is ideal for confined under-dash and engine compartment spaces. It has a chrome plated polish that helps prevent corrosion and rust CRV construction. It has a 60 tooth gear head design. It has a high torque and a reversible off set 12 piece counter display.

  • Brand: Titan Tools
  • ASIN: B005F1QL02
  • UPC: 802090112072

General Tools 502 Cordless Lighted Power Precision Screwdriver

General Tools 502 Cordless Lighted Power Precision

The new lighted cordless precision screwdriver from General Tools and Instruments is a first-of-its-kind tool that can handle all of those difficult, repetitive fastening jobs involving tiny screws in tight spaces where it is difficult to see. It is perfect for on-the-go technicians and anyone who works with small parts and micro assemblies.GENERAL TOOLS - THE PRECISE TOOL FOR DOING THE JOB EXACTLY RIGHT. Offering over 1,000 tools, we’re proud to provide tradesmen, craftsmen and DIYers around the world with a broad range of affordable, specific-purpose mechanical hand tools and precision measuring and inspection tools. For inquiries, please contact our Customer Service Department at 212-431-6100. We strive to provide our customers with 100% satisfaction. WORK SMARTER, MEASURE BETTER & BE MORE PRODUCTIVE WITH GENERAL TOOLS

  • Color: Black
  • Brand: General Tools
  • ASIN: B00FAU547O
  • UPC: 792745079624

Chapman Offset Screwdriver Kit Inch/Metric, 27 Pc, w/Ratchet

Chapman Offset Screwdriver Kit Inch/Metric, 27 Pc,

Offset Inch/Metric Screwdriver Kit - 27 pc. kit contains a Midget Ratchet, Extension and Screwdriver Handle plus the following Adapters: Allen Hex-type (size dist. across flats): .050", 3/32", 9/64", 7/32", 1/16", 7/64", 5/32", 1/4", 5/64", 1/8", 3/16"; Slotted Head (Size blade width): 3/16", 1/4", 3/8"; Phillips Head: # 1, # 2; 1/4"Sq. Drive.; Metric, Allen Hex-type: 1.5mm, 2mm, 2.5mm, 3mm, 4mm, 5mm, 6mm.

  • ASIN: B004I2ZTIY

NoCry Stubby Ratcheting Screwdriver Kit with 12-in-1 Mini Bit Set including Flathead, Hex, Phillips and Pozidriv Tips

NoCry Stubby Ratcheting Screwdriver Kit with 12-in-1 Mini

Comes with four different types of tips. NoCry's Stubby Ratcheting Screwdriver includes slot, hex, Phillips and Pozidriv tips securely stored in the handle. When in use, the tip is secured in place with a ballpoint locking mechanism, so you can get the job done quickly.Easily adjustable for faster tightening or loosening. Ratchet adjusts from clockwise to anti-clockwise and standard locked positions by simply sliding the switch up and down. Shifting from one direction to the other takes less than a second so you get more done-faster.Perfect for almost any job around the home. The only screwdriver you need for home repairs, crafts, and small projects-especially projects that require maximum maneuverability in tight spaces where regular screwdrivers simply don't fit.Small enough to be kept anywhere. NoCry's Ratcheting Screwdriver is compact in size (just under 4 inches high without a bit inserted) which means this multi-purpose tool fits almost anywhere, from your kitchen drawer to your tool belt. And the Twist-and-Click Bit Lock ensures you'll never lose the tips - each one has its own designated chamber in the handle that can be easily accessed by rotating the lock to open.Your satisfaction is guaranteed. The Stubby Ratcheting Screwdriver comes with our "No Hassle Guarantee". If ...

  • Color: Black
  • Brand: NoCry
  • ASIN: B075D3CYC1

ARES 70040 | 1/4-inch Drive Close Quarter Micro Bit Ratchet | This Mini Screwdriver has a High Torque 72-Tooth Gearhead, 5 Degree Sweep and Spring Loaded Detent Ball Bit Holder

ARES 70040 | 1/4-inch Drive Close Quarter Micro

Unbeatable For Hard To Reach Fasteners The ARES 1/4-inch Drive Torque Offset Micro Bit Driver was originally designed for automotive use in today's increasingly compact engines, but it's also a huge asset to anyone who works on electronics, household appliances, industrial machines, Steinway pianos, weapons, fine calibration, medical and dental equipment, sound and lighting equipment, door handles, and more. With a high-strength Chrome Vanadium steel handle and Chrome Moly steel ratchet gear, you'll get 43 ft./lbs. of torque with only 5 degree sweep. The spring loaded detent ball ensures none of the included eight CR-V CNC'd precision bits will drop, so you can tackle the most common jobs with confidence.  Features:  Includes: 1 pc. micro bit ratchet (mini screwdriver), 8 pc. precision bits, and 1 pc. bit storage rail 1/4-inch drive Bit sizes: Phillips 1 and 2, Slotted 1/4-inch and 3/16-inch, Torx T-15 and T-20, and Square R1 and R2 Handle constructed of Chrome Vanadium steel Ratchet gear constructed of Chrome Moly steel 5 degree sweep 43 ft./lbs. of torque Spring loaded detent ball ensures bits do not drop 72 tooth gearhead Ratchet head is only .83 inches wide, perfect for hard to reach or confined spaces

  • Brand: ARES
  • ASIN: B01BUJXQJ6
  • UPC: 635983559537
Similar Tools Offset Screwdriver Results
Tools Offset Screwdriver Video Reviews

German Offset Screwdriver Showdown

Tools Offset Screwdriver

A showdown of offset screwdrivers from Felo, Gedore, Wiha and Wera. Check to see which brand co...

Tags: Offset Screwdriver,Offset Screwdriver Review,Of...

Klein offset screwdriver Rapi-Driv 67100

Tools Offset Screwdriver

Tags: klein,offset,screwdriver,rapi-driv,67100,electr...

General tools 8078 RATCHET OFFSET SCREWDRIVER SET, 19PC

Tools Offset Screwdriver

Demo of General Tools 8078 RATCHET OFFSET SCREWDRIVER SET, 19PC

Tags: General,Tools,8078,RATCHET,OFFSET,SCREWDRIVER,S...