Omega 32225B Black Heavy Duty Jack Stand - 22 Ton Capacity
Omega 32225B Black Heavy Duty Jack Stand -
The Secret of Giving You Extra Safety to Work On Automotive Omega 32225B Jack Stand is the 22 Ton pin style Jack Stand and was designed with the safety in mind. It uses the heavy duty pin for adjustable heights. It gives you the ability to support from minimum height of 13-1/3 inch to maximum height of 19-2/3 inch. Omega 32225B Jack Stands are built with the sturdy, welded steel construction. The heavy gauge, steel frame really gives you the additional strength to prevent from twisting. With the large saddle, Omega 32225B jack stands give you the ability to securely support the load. - Heavy Duty Holding Pins for Adjustable Heights - Large Saddle Securely Supports the Load - Sturdy Welded Steel Construction - Heavy Gauge Steel Frame Help Prevent Twisting Specifications - Capacity: 22 Ton - Min Height: 13-1/3 inch; Max Height: 19-2/3 inch; - Saddle Size: 3-1/7 x 2-3/4 inch - Base Size: 9-5/6 x 9-5/6 Inch - GW: 63 Lbs Omega 32225B Pin Style Jack Stand is backed by the full one year warranty from the date of the purchase.
- Color: Black
- Brand: Omega
- ASIN: B000GTMIQO
- UPC: 470770501630
Torin Big Red Steel Jack Stands: 12 Ton Capacity, 1 Pair
Torin Big Red Steel Jack Stands: 12 Ton
The Torin Big Red steel jack stands are a must have necessity in the garage. Sold in pairs, these heavy duty 12 Ton (24,000 lb) ratchet stands help support your vehicle after lifting with a jack, and range in height from 18-5/16" to 28-1/8". Used in pairs, these are designed and dedicated to keeping you safe. Features a locking rack and pawl that give you the security and stability where you need it most. The large saddle surface area provides better contact with the load being supported. Constructed of high-grade forged steel with a welded frame design, these jacks are built to exacting standards for quality and durability. The single piece self-locking, multi-position, forged iron ratchet bar provides precise adjustments. Meets ASME Safety Standards and includes a limited 1 year manufacturer warranty.
- Color: Red
- Brand: Torin
- ASIN: B0002H335A
- UPC: 615268412023
Performance Tool W41021 2 Ton (4,000 lbs.) Capacity Heavy Duty Jack Stand Set
Performance Tool W41021 2 Ton (4,000 lbs.) Capacity
2 ton (4480 pounds/2032 kilogram) capacity. Ratcheting style for easy adjustments. Easy to adjust height. Great for cars and light duty trucks. Tough bright yellow enamel finish. 1 pair (2 jacks).
- Brand: Performance Tool
- ASIN: B0002KO1VM
- UPC: 039564124211
Blackhawk B6350 Black/Red Fast Lift Service Jack - 3.5 Ton Capacity
Blackhawk B6350 Black/Red Fast Lift Service Jack -
Fast Lift to the Jacking Point Blackhawk B6350 Service Jack is a 3-1/2 ton (7,000 lbs) capacity service jack that features the unique design of fast list technology to fast lift to the jacking point with no load. It features the swivel saddle that provides you with the easy jack positioning and user safety. Its heavy duty steel construction also provides you the safe use and long term durability. Blackhawk B6350 Service Jack also features the bypass device that preventing the damage from over pumping. Blackhawk B6350 Service Jack also features the built-in internal safety valve and vent plug to ensures the safe operation. - 3½Ton (7,000 Lbs.) Lift Capacity - Fast Lifting Technology - Heavy Duty Steel Construction & Swivel Saddle - Built-In Safty Valve and Bypass Device Blackhawk B6350 Service Jack is backed by the full one year warranty from the date of the purchase. Click the buy button now to get your long lasting professional sevice jack
- Color: Black/Red
- Brand: Blackhawk
- ASIN: B0054WGRBA
- UPC: 031112507927
OTC 1780 Automotive Accessories
OTC 1780 Automotive
It is a pair of 22 ton jack stands that meet most stringent and current ASME/PALD standards for lifting equipment. They feature a flat base to prevent sinking into soft surfaces, a large 3 inches x 3-3/4 inches saddle, and can be adjusted in 3 inch increments to facilitate a wide variety of maintenance services.
- Brand: OTC
- ASIN: B007KIMALC
- UPC: 080850327557
22 Ton Jack Stands Pin Style Set of 2
Sunex 1522 22-Ton Jack Stands, Pair
Sunex 1522 22-Ton Jack Stands,
Used in pairs for supporting trucks, trailers, and equipment in fleet garages, agricultural, industrial and construction environments. Four leg steel base and support tube made of heavy schedule pipe for added strength and stability. Multiple hole locations in the support tube make pin facilitated height adjustment quick and easy. Height adjustment pin is attached to stand to prevent loss. Large saddle with locating lugs support and position vehicle frame.
- Brand: Sunex Tools
- ASIN: B0093NBS9W
- UPC: 971500160344
Omega 32105B Black Heavy Duty Jack Stand - 10 Ton Capacity
Omega 32105B Black Heavy Duty Jack Stand -
The Secret of Giving You Extra Safety to Work On Automotive Omega 32105B Jack Stand is the 10 Ton pin style Jack Stand and was designed with the safety in mind. It uses the heavy duty pin for adjustable heights. It gives you the ability to support from minimum height of 18-5/8 inch to maximum height of 30-1/2 inch. Omega 32105B Jack Stands are built with the sturdy, welded steel construction. The heavy gauge, steel frame really gives you the additional strength to prevent from twisting. With the large saddle, Omega 32105B jack stands give you the ability to securely support the load. - Heavy Duty Holding Pins for Adjustable Heights - Large Saddle Securely Supports the Load - Sturdy Welded Steel Construction - Heavy Gauge Steel Frame Help Prevent Twisting Specifications - Capacity: 10 Ton - Min Height: 18-5/8 inch; Max Height: 30-1/2 inch; - Saddle Size: 3-1/8 x 5 inch - Base Size: 16 x 16 Inch - GW: 88 Lbs Omega 32105B Pin Style Jack Stand is backed by the full one year warranty from the date of the purchase.
- Color: Black
- Brand: Omega
- ASIN: B000I1FP7E
- UPC: 047077050200
Performance Tool W1640 2-1/2 Ton (5,000lbs.) Capacity Jack Floor Jack
Powerbuilt 620422E Heavy Duty 4000 lb Triple Lift Jack
Powerbuilt 620422E Heavy Duty 4000 lb Triple Lift
Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of innovative products for home, garage and worksite. Founded in 1979, Alltrade is privately Held and maintains global sourcing, research, assembly and sales facilities to serve customers on every continent.
- Brand: Alltrade
- ASIN: B00336EN60
- UPC: 028907354422
OTC (5373) Stinger 6 Ton Jack Stands - Pair
OTC (5373) Stinger 6 Ton Jack Stands -
The OTC 5373 are made with a formed and welded steel base for strength and a self-locking ratchet handle cannot be released under load. A durable baked enamel finish resists corrosion and the stands conform to ANSI PALD load rating standard. These stands are factory tested before shipment, and have welded foot pads that resist sinking into soft ground or asphalt. Base of 11-9/16" x 10-3/8" and height range of 15-5/8" to 23-11/16".
- Brand: OTC
- ASIN: B00GMIX5MY
- UPC: 731413571473
Arcan XL20 Black Service Jack
Arcan XL20 Black Service
The Arcan jack is a sleek, low profile, durable, and long lasting 2T steel service jack capable of taking on any job for professionals or weekend warriors. The Arcan true low profile design allows users to get under almost any vehicle to lift and comes at a significantly lower cost compared to other models in the market. This model passes the 2009 ASME PALD standard, which is the industry's leading safety regulation for lifting equipment. Lift Capacity (tons) : 2
- Color: Black
- Brand: Arcan
- ASIN: B00BMPFI6I
- UPC: 858957001911
Hein-Werner HW93652 Blue Heavy Duty Service Jack - 3 Ton Capacity
Hein-Werner HW93652 Blue Heavy Duty Service Jack -
Case Iron Lift Arm and Pump Base for Durability and Strength Hein-Werner HW93652 Hydraulic Service Jack is a 3 Ton service jack assembled in USA. It features cast iron lift arm and pump base to increase the strength. With flanged side plates and the wider frame, it provides the stability and strength under a load. Hein-Werner HW93652 Service Jack features in - line pump assembly to assure long life and no off - center forces for ease in pumping, aligning and reduce wear. At the same time, Hein-Werner HW93652 features U-Joint release mechanism for precise load control. With one piece handle, it eliminates bending, and making the lifting process with the ease. In addition, it has the sealed hydraulic pump built in, which gives you the long lasting service. - Assembled in the USA - Cast Iron Lift Arm and Pump Base for strength and durability - U-Joint for Precise Load Control; and Large Front Wheels and Rear Casters for Easy Maneuvering - Flanged Side and Plates and Wide Frame for Stability Specifications - Capacity: 3 Ton - Min Height: 5 inch; Max Height: 23-1/2 inch - Lifting Height: 18-1/2 inch - Saddle Diameter: 6-3/4 inch - Handle Length: 50 inch - Chassis Length: 31-1/2 inch - Chassis Height: 7-1/4 inch - Wheel to Wheel Width: 11-3/4 inch - GW: 107 Lbs Hein-Werner HW93652...
- Color: Blue
- Brand: Hein-Werner
- ASIN: B000OJIO96
- UPC: 010271016112
Easycosy Car Jack Stand Pad,Upgrate 5-6 Tons Rubber Jack Pad Adapter Slotted Frame Rail Pinch Weld Protector,4 Packs(New jackpad-4p)
Easycosy Car Jack Stand Pad,Upgrate 5-6 Tons Rubber
You deserve to have the best jack pad for you,for your car！ This 6 Tons load-bearing jack pad can carry the following vehicles: Full Size Suv Large Suv----Lincoln Navigator/Cadillac Escalade XT5/Infiniti QX80 QX70 QX60/Lexus LX RX GX/Honda Pilot/Volvo XC90 XC60/Mazda CX-9 /Volkswagen Atlas/Toyota Land Cruiser Sequoia/Ford Expedition /Chevrolet Suburban Tahoe GMC Yukon/Nissan Armada/Mercedes-Benz GLE/Maserati Levante/Lincoln MKX/BMW X3 X4 X5 X6 X7/Acura MDX/Land Rover Discovery. Heavy Duty Pickup Heavy Duty Trucks Large Trucks---Honda Ridgeline/Chevrolet Colorado Silverado 1500 2500 3500 HD/GMC Canyon Ram 1500 2500 3500 HD/Ford F-150 F-250 F-350 F-450 F-550/GMC Sierra 1500 2500 3500 HD /Nissan Titan. Large Sedans---Honda Accord/Mazda 6/Buick LaCrosse Regal/Ford Taurus Fusion/Hyundai Sonata/Chevrolet Impala Malibu/Toyota Camry/Nissan Maxima/Kia Optima /Volkswagen Passat/Chrysler 300/Dodge Charger S /Porsche Panamera/Lexus LS LC GS IS ES/Cadillac CT6 XTS/Jaguar XJ. Off Road Vehicle----Jeep Grand Cherokee/Toyota 4Runner/Subaru Outback. Minivan----Honda Odyssey/Chrysler Pacifica/Toyota Sienna/Dodge Grand Caravan. Friendly Note: Please verify dimensions and ensure fitment to your vehicle. About odour:it's normal as the jack pads are new,and odour will disappear a few days later. Or ...
- Color: New jackpad-4p
- Brand: Easycosy
- ASIN: B07Q2XFHQM
Pittsburgh Automotive 3 Ton Heavy Duty Ultra Low Profile Steel Floor Jack with Rapid Pump Quick Lift
Craftsman 3 Ton Floor Jack, Jack Stands and Creeper Set by Craftsman
Craftsman 3 Ton Floor Jack, Jack Stands and
The Craftsman Three-Ton Jack, Jack Stands And Creeper Set will set you up for auto repairs just like the pros. There are few tasks you will not be able to perform with the heavy duty three-ton jack, jack stands and creeper from Craftsman and Sears. If you have ever crawled and squirmed along the gravely road to try and get into a dark, tight spot under the hood, you will appreciate what a great jack, stand and creeper set can do for you. Get out of the dirt, and get into the oil pan with ease. Three-Ton Jack, Jack Stands And Creeper Set gives you the ability to provide safe auto service in your own home. The heavy duty, welded construction of this stable three-ton jack offers 6,000 pounds of pure lifting power. The generously sized, easy rolling creeper is 36 inches long for excellent stability as you slip back to follow that leaky brake line. The built-in headrest on the creeper offers a welcome bit of comfort on the bigger jobs. The jack provides up to 19.25 inches clearance, a great amount of space for ease of repair.
- ASIN: B018A3DY10
- UPC: 784497620520
TONDA Steel Jack Stands, 2 Ton Capacity, 1 Pair
TONDA Steel Jack Stands, 2 Ton Capacity, 1
Product Parameters: Rated capacity: 2 ton (4000 lbs) Lift range: 10.7-17 inches Oversized foot base: 7.68" by 7.68" Self-locking Design: Self-locking ratchet for ease of use means no locking key is necessary; When the handle is up, ratchet can be adjusted to any height freely. And when it down, ratchet will be locked automatically. Warranty: Meets ANSI/ASME PALD 2014 standards; 1 year manufacturer warranty; If there are any problems with our products, please feel free to contact us. Precautions 1. Please use jack stands on the ground as flat as possible. 2. Please use the jack to lift the car before use. 3. Adjust the jack stands to the appropriate position according to the lift height, then you can remove the jack. 4. After finish repairing the vehicle, please lift the jack to the same height, then remove the jack stands and finally lower the jack and remove it. Company Profile: TONDA Machinery Co., Ltd. is committed to the development and production of jacks and hydraulic tools. We mainly produce bottle jack series, floor jack series as well as workshop crane. The company is certified by ISO9001:2008. This product has EU GS/CE certification, and meets US ANSI/ASME2009 standards, as well as Australia AS/NZS 2693:2007 standard. TONDA Machinery Co., Ltd. has a long history and...
- Color: silver
- Brand: TONDA
- ASIN: B06Y656QMR
- UPC: 709812167764
Pro-Lift F-767 Grey Low Profile Floor Jack - 2 Ton Capacity
Pro-Lift F-767 Grey Low Profile Floor Jack -
Fit Under Low Ground Clearance Vehicle Pro-Lift F-767 Grey Low Profile Floor Jack is a 2 Ton floor jack that give you better access to low ground clearance vehicle. And,give you the lifting range from 3-1/2 inches to 14 inches. The Jack can be fit under a clearance of 3-1/2 inches and maneuvered easily into position. Pro Lift F-767 floor jack also features the heavy duty steel construction that provides the long lasting durability. Pro Lift unique patented bypass device protects against over pumping. Its built-in safety valve provides overload protection. - Extra Low Profile - Lifting Range from 3-1/2 inches to 14 inches - Patented bypass device protect over pumping - Built-In Safty Valve Provides overload protection Pro Lift F-767 floor jack is backed with SFA 90 Days Warranty from the Date of Purchase. Take one now to access to the areas you never access before.
- Color: Grey
- Brand: Pro-LifT
- ASIN: B00BG6IJA0
- UPC: 652597529961
Roadstar 22 Ton Air Hydraulic Floor Jack HD Truck Lift Jacks Service Repair Lifting Tool
Roadstar 22 Ton Air Hydraulic Floor Jack HD
This is our brand new 22 ton air hydraulic floor jack.It is a perfect jack for industrial shop garage use. It's for repairing trucks, trailers, buses and other heavy duty equipment. Feature： 1. Commercial 22 Ton Air Hydraulic Axel Floor Jack 2. 2 Large hard rubber tires on steel wheels 3. Sturdy handle & chrome plated ram 4. One Pull Of The Handle Activates The Self-Retracting 22-Ton Capacity Ram 5. Easy to operate 6. Suitable for home or business applications Specifications： 1. Color: Blue 2. Material: Q235 steel 3. 1 Handle Setting,with 4 Saddle Extensions 4. Min Saddle Height:9" Wiehout Adaptor 5. Maximum Saddle Height:17-11/16" 6. Stroke:4-1/2" 7. Handle Length:47";Includes Handle Lock Lever 8. Wheel Diameter:8" 9. Adjustable angle: 90 - 180 degree 10. Size of saddle extensions: 20 25 60 100MM 11. Load Capacity: 22 Ton 12. Air Pressure: 90 to 145psi 13. Lighting Height:4.92" 14. Adjust Height:3.15" 15. Package Dimensions: (5.59 x 14.17 x 9.25)" / (65 x 36 x 23.5)cm (L x W x H) 16. Gross Weight: 29.32 kg / 64.64 lbs 2 x Package include: 1 x jack 4 x extensions
- Color: Blue
- Brand: Roadstar
- ASIN: B017YP874E
- UPC: 748440409938
CARTMAN 3 Ton Double Locking Jack Stands with Safety Pin (Sold in Pairs)
CARTMAN 3 Ton Double Locking Jack Stands with
Cartman 3 Ton Jack Stand features a double locking pawl and tooth design for extra protection. The one piece multi-position ductile ratchet bar provides super strength and durability. The quick adjustment mechanism securely locks it into the desired location providing extra safety. And with Outer foot pad and Safety pin
- Brand: CARTMAN
- ASIN: B07Q79K7QM
Harbor Freight PITTSBURGH 6 TON HEAVY DUTY JACK STANDS
In this video I show the physical difference of the Harbor Freight Pittsburgh Heavy Duty 6 Ton Ja...
6 Ton Heavy Duty Jack Stands
Great Jack Stands from Pittsburgh. Purchased at Harbor Freight.
harbor freight vs. wal-mart black jack pro 3 TON JACK STANDS
a comparison of the 2 side by side and a little of how i feel about them. follow me on twitter @r...
Is the $80 Harbor Freight 3-Ton Low Profile Jack Any Good? (Pittsburgh Jack Review)
Should you buy an $80 jack from Harbor Freight? In this video, I'll review the Pittsburgh 3-ton, ...
All in One Bottle Jack Stand - Amazon Best Buy
Check out this awesome and cheap jack stand on Amazon https://amzn.to/2RtRsl8. It is a jack stand...