Digital Robot Motor Servo,Quimat High Performance Full Metal 17KG Torque 180 Degree Rotating Digital Brushless Motor With U Servo Bracket for Robots Helicopter Airplane Car Truck Boat Controls

Digital Robot Motor Servo,Quimat High Performance Full Metal

Features: Net Weight: 60g (Servo only) Dimension: 40×20×40.5mm Stall torque:15kg/cm(6.6v); 17kg/cm(7.4v) Operating speed: 0.16 sec/60°(7.4v) Control Angle: 180 degree Operating voltage: 6-7.4v Gear Type: Metal gear servo wire length: 30cm Dead band width: 3us Compatible with:RC Robot Package Contents Dual Output Shaft Servo Motor * 1 U Servo Bracket * 2 Metal Horn * 2 Screws

  • Brand: Quimat
  • ASIN: B071N9MCJL

Futaba FSH47 Servo Eyelet S134/3302 (20-Piece)

Futaba FSH47 Servo Eyelet S134/3302

This contains 20 brass eyelets which go in the center of the servo grommets for mounting the servos. SPECS: Height: 7mm Diameter: 3mm kh3-27-02.

  • Brand: Futaba
  • ASIN: B0015H1BBE

Matek F405 Wing Flight Controller F4 FC Built in OSD BEC Current Sensor on Board for RC FPV Racing Drone

Matek F405 Wing Flight Controller F4 FC Built

FCMCU: 168MHz STM32F405IMU: MPU6000 accelerometer/gyro (SPI)Baro: BMP280 (I2C)OSD: INAV OSD w/ AT7456E chipBlackbox: MicroSD card slot (SD/SDHC)VCP andamp; 6x UARTs2x Motors, 7x Servos outputs2x I2C3x LEDs for FC STATUS (Blue, Red) and 3.3V indicator(Red)Built in inverter for SBUS input (UART2-RX)PPM/UART Shared: UART2-RXSoftSerial on TX2 padBattery Voltage Sensor: 1:10 (Scale 1100)WS2812 Led Strip : YesBeeper : YesRSSI: YesFC FirmwareINAV FlightTarget: MATEKF405SEPDBInput voltage range: 9~30V (3~6S LiPo) w/TVS protection2x ESC power padsCurrent Senor: 104A, 3.3V ADC, Scale 317BEC 5V outputDesigned for Flight controller, Receiver, OSD, Camera, Buzzer, 2812 LED_Strip, Buzzer, GPS module, AirSpeedContinuous current: 2 Amps, Max.3ABEC 9V /12V outputDesigned for Video Transmitter, Camera, Gimbal ect.Continuous current: 2 Amps, Max.3A12V option with Jumper padBEC Vx outputDesigned for ServosVoltage adjustable, 5V Default, 6V or 7.2V via jumperContinuous current: 5 Amps, Max.6AOutput Ripple: 50mV (VIn=24V, VOut=5V5A load)BEC 3.3V outputDesigned for Baro / Compass module and Spektrum RXLinear RegulatorContinuous current: 500mAPhysicalMounting: 30.5 x 30.5mm, Φ4mm with Grommets Φ3mmDimensions: 56 x 36 x 13 mmWeight: 25gPackage Including1 * Matek F4 Flight Controller Built-in OSD

  • Color: Matek F405-WING FC
  • Brand: Makerfire
  • ASIN: B07DR9PWCS
  • UPC: 192684491011

Futaba FSH21 Eyelets Brass Servo

Futaba FSH21 Eyelets Brass

This contains 20 brass eyelets which go in the center of the servo grommets for mounting the servos. SPECS: Height: 4.5mm (.17 ) Diameter: 3mm (.11 ) Inside Diameter: 2.75mm kh3-27-02 updated jpg 3/9/09.

  • Brand: Futaba
  • ASIN: B0015H6GYQ

Futaba S3004 Standard Ball Bearing Servo

Futaba S3004 Standard Ball Bearing

The Futaba S3004 Standard Ball Bearing Servo weighs just 1.3 ounces, and delivers 44 oz.-in. of torque with 4.8V power.Features:Single ball bearing on output shaftPrecise tight fit throughout the geartrainStandard size and lightweightThree pole motorNylon gearsOne year warrantySpecifications:Speed: 0.23 sec/60° @ 4.8V; 0.19 sec/60° @ 6.0VTorque: 44 oz-in (3.2 kg-cm) at 4.8V; 57 oz-in (4.1 kg-cm) at 6.0VDimensions: 1.6 x 0.8 x 1.4 in (40 x 20 x 36 mm)Weight: 1.3 oz (37 g)Connector: "J" typeIncludes S3004 standard servo, preinstalled round servo horn (FSH6W), brass eyelets, rectangular rubber grommets, mounting screws, and three servo horns (round, large "X", small "x").

  • Color: Brown/a
  • Brand: Futaba
  • ASIN: B001KAPMG6
  • UPC: 885526524120

4WD Robot Chassis Kit with 4 TT Motor for Arduino/Raspberry Pi

4WD Robot Chassis Kit with 4 TT Motor

  • Color: Yellow
  • Brand: XiaoR Geek
  • ASIN: B07F759T89
  • UPC: 786738589269

JR Radio Servo Mounting Eyelets (20) JRPA233

JR Radio Servo Mounting Eyelets (20)

This is a pack of twenty JR Servo Mounting Eyelets. These eyelets are used with the rubber grommets that come stock with most servos. Using the eyelets and grommets helps isolate any electrical grounding and chassis vibrations that may occur.

  • Brand: JR
  • ASIN: B000BMARKK
  • UPC: 885890286761

Futaba S3802 Fut J High Torque Sail Servo

Futaba S3802 Fut J High Torque Sail

This is a High Torque, Arm-Type Sail Servo with a Metal Output Gear forSailboat Applications.This S3802 is the replacement for the S125 servo. This servo can produce high-current draw from your batteries.If using NiMH or LiPo batteries, make sure they are capableof delivering sufficient amps. FEATURES: Metal gears with a special interference-eliminating lubricant tohandle high torque applications.3-pole motorTwo ball bearingsPlastic sail arm included (FSH25H), plus 22mm Round HornRubber gaskets make it water and dust resistant.One year warrantyHas an arc of 60°, it is capable of 140° with a computer radiothat has adjustable ATV INCLUDES: One S3802 High Torque Sail Servo w/ J Connector Four Mounting ScrewsFour Rectangular GrommetsFour Brass eyelets SPECS: Length: 1.7" (1-3/4") (44mm)Width: 0.9" (7/8") (23mm)Height: 1.7" (1-11/16") (43mm)Weight: 2.5oz (2-9/16oz) (72g)Sail Arm Length: 125mmTorque: 122 oz-in @ 4.8V - 153 oz-in @ 6V8.8 kg-cm @ 4.8V - 11.0 kg-cm @ 6VTransit Time: 0.70 sec/60° @ 4.8V - 0.56 sec/60° @ 6V

  • Brand: Futaba
  • ASIN: B0015GZ76A

XiaoR Geek 2 PCS Line Sensor Infrared Obstacle Avoidance Sensor Module Adjustable Distance Photoelectric Switch for Arduino/Raspberry pi Smart Robot Car

XiaoR Geek 2 PCS Line Sensor Infrared Obstacle

Electrical Characteristics: Power supply: 5V Current: 0.01A Default setting distance: 20cm. Sensing distance can be adjusted according to requirements. Connector Definition: Red - "+", Yellow - signal, Brown -"-" Size: Diameter: 17mm Sensor length: 52mm Wire length: 288mm

  • Color: IR sensor
  • Brand: XiaoR Geek
  • ASIN: B078TZRGXF
  • UPC: 786738589115

GoolRC Gimbal FPV Camera Mount with Anti Vibration Plate for DJI Phantom Walkera Qr X350 Gopro Hero 3 3+ 4 CF Carbon Fiber

GoolRC Gimbal FPV Camera Mount with Anti Vibration

Carbon Fiber Shock Absorber Gimbal PTZ for DJI F450 F550 Quadcopter Airplane Gopro Hero 3 FPV Introductions:   It can be used for 4-axis and 6-axis,or fixed wing airplane for FPV. Portable dismantling screw without a screwdriver, simpler for GoPro3 installation. Specification: Material: carbon fiber Package size: 12 * 8 * 3cm / 4.7 * 3.1 * 1.2in Package weight: 53g / 2oz Package list: 1 * Carbon Fiber Shock Absorber Gimbal PTZ(Unassembled)

  • Color: Camera Gimbal
  • Brand: GoolRC
  • ASIN: B00NSF79EO
  • UPC: 702411267163

Futaba S3305 Standard High-Torque Servo with Metal Gears

Futaba S3305 Standard High-Torque Servo with Metal

The Futaba S3305 servo is recommended for use in RC cars and boats that require standard-size, high-torque servos. The servo features two ball bearings, a 3-pole motor, a standard Futaba J style connector and is backed by a one-year warranty. Specifications: Dimensions: 1.6 x 0.8 x 1.5 in (40 x 20 x 38 mm) Weight: 1.7 oz (47 g) Speed: 0.25 sec/60° @ 4.8V; 0.20 sec/60° @ 6V Torque: 124 oz-in (8.9 kg-cm) at 6V; 99 oz-in (7.1 kg-cm) at 4.8V Note: This servo can produce high-current draw. Make sure your batteries are capable of delivering sufficient amps.

  • Brand: Futaba
  • ASIN: B0015H4C24
  • UPC: 885853999134

E-flite 17 Gram Analog Servo (400mm Lead), SPMSA420

E-flite 17 Gram Analog Servo (400mm Lead),

17 gram analog servo (400mm lead)

  • Brand: E-flite
  • ASIN: B010G76G2W
  • UPC: 605482584460

Futaba S9252 Digital All Purpose Servo

Futaba S9252 Digital All Purpose

This is the Futaba S9252 Digital High Torque, All-Purpose F3C Servo / with High-Current Wire Lead and "J" Connector Pre-Installed. / / This servo can produce high-current draw from your batteries. / If using NiMH or LiPo batteries, make sure they are capable / of delivering sufficient amps. / / FEATURES: Digitally enhanced microprocessors cut about half the response time / from transmitter input to servo reaction. / Coreless motor / Dual ball bearings on the output shaft / Plastic/nylon gear train / Moderately high speed / High current, high capacity wire lead with low resistance / Case is made of Black plastic / Dust and water resistant (Not waterproof) / Works well with all control surfaces on F3C helicopters or precision / fixed wing aircraft. / One year warranty / / INCLUDES: One Digital All Purpose Servo w/Small Round Horn / Four Rectangular Grommets / Four Brass Bushings / Four Mounting Screws / One Large Round Horn / One Six Arm Horn / / SPECS: Speed: .14 sec/60° (based on 4.8V rating) / Torque: 92 oz-in (6.6 kg-cm) (based on 4.8V rating) / Weight: 1.8oz (50g) / Power Supply: 4.8V (Futaba does not recommend using 6V) / Length: 1.6" (41mm) / Width: .8" (20mm) / _ Height: 1.5" (38mm)

  • Brand: Futaba
  • ASIN: B0015GZ7FQ

Futaba S3001 Servo Standard BB

Futaba S3001 Servo Standard

This is a Standard Servo with a Ball Bearing on the output shaft.             This has a "J" connector and uses a nylon gears.          This servo can produce high-current draw from your batteries.          If using NiMH or LiPo batteries, make sure they are capable                         of delivering sufficient amps.FEATURES: Single Top Ball Bearing          Same mounting as S148 and S9201 (individual rectangular grommets)          3-pole motor          Nylon gearsINCLUDES: One S3001 Standard Servo          One accessory packageSPECS:    Dimensions: 1.6 x 0.8 x 1.4" (1-9/16 x 13/16 x 1-7/16")            (40 x 20 x 36mm)          Weight: 1.6oz (1-9/16oz) (44g)

  • Brand: Futaba
  • ASIN: B0015H2V7M

Futaba S148 Precision Servo

Futaba S148 Precision

The S148 Standard Servo yields increased power and speed with a reduced size / and weight compared to the S128, yet uses the same gears and servo cases. / This servo is a replacement for the following servos.(S6,S17,S18,S23,S26,S28 / S38,S128) / / This servo can produce high-current draw from your batteries. / If using NiMH or LiPo batteries, make sure they are capable / of delivering sufficient amps. / / INCLUDES: One S148 Standard Precision Servo w/"J" connector and metal top / bushing / One accessory package with round rubber grommets, brass eyelets, / mounting screws, round and star shaped servo horn / Nylon gears / One year warranty / / SPECS: Control system: Pulse width control, 1.52ms neutral / Motor: 3-pole / Power requirement: 4.8V or 6V (from receiver) / Power consumption: 6V 8mA (at idle) / Torque: 33.3 oz-in @ 4.8V or 41.6 oz-in @ 6V / (2.4 kg-cm @ 4.8V or 3 kg-cm @ 6V / Transit Time: .28 sec/60° @ 4.8V or .22 sec/60° @ 6V / Length: 1.6" (41mm) / Width: .8" (20mm) / Height: 1.4" (36mm) / Weight: 1.6oz (44.4g) / Mounting on-center dimensions - / Width: .4" / Length: 1.9" / Shaft Diameter: 5.88mm

  • Color: black
  • Brand: Futaba
  • ASIN: B0015GZ8VE

Futaba S3151 Digital Sport BB Servo

Futaba S3151 Digital Sport BB

Futaba has a long history of providing reliable, high-quality products that last. That longevity also allows for an abundance of available information about most generations of Futaba products. After 50+ years of innovation in the hobby industry, Futaba is especially proud of the distinguished reputation we hold with hobbyists. We aim to maintain that regarded level of consumer confidence.

  • Color: Brown/a
  • Brand: Futaba
  • ASIN: B0015H1AB0

GOTECK GS-9025MG 9G MG90 Analog Metal Gear Servo

GOTECK GS-9025MG 9G MG90 Analog Metal Gear

" "GOTECK GS-9025MG 9G MG90 Analog Metal Gear Servo Description: Model: GS-9025MG Weight: 13 g Digital,metal gear Dimensions: 23.0 x 12.1 x 28.8 mm Wire Length: 180mm (standard JR style plug) Operating Voltage: 4.8 v - 6.0 v Speed: 0.12 sec/60º @ 4.8v | 0.11 sec/60º @ 6.0v Torque: 32.6 oz-in (2.35 kg-cm) @ 4.8v | 34.7 oz-in (2.5 kg-cm) @ 6.0v Spline diameter: 4.8 mm Range: 170 degree Goteck Servos are the perfect alternative to expensive "name brand" servos. They offer superior performance, longevity, and quality all at an affordable price. They are fast, lightweight, smooth and precise servos that you can trust! Each servo includes several servo horn sizes, grommets, and mounting screws. Feactures: 1.Very comparable to Hitec HS-65MG. 2.Very small, lightweight, and POWERFUL! METAL GEAR for longer wear life and extra strength in demanding applications. 3.Perfect for use in medium-sized electric airplanes or helicopters. 4.Compare to GS-9018MG: This servo has higher TORQUE. The 9018MG has less torque but FASTER speed. 5.Horns are included. Package Includes: 1 x GS-9025MG Analog Servo

  • Color: Blue
  • Brand: lucrative
  • ASIN: B00UDPI4ZA
  • UPC: 634630539694

Jameco Reliapro CYS-S3003 Continuous Rotation Servo Motor, Stall Torque, 1.6" L x 0.8" W x 1.5" H

Jameco Reliapro CYS-S3003 Continuous Rotation Servo Motor, Stall

Servo accessories: 1 servo arm full arm 1.52'' across, 1 plastic servo disc 13/16'' diameter, 4 rubber grommets 2.92mm diameter, 4 metal eyelets, 4 x 13mm Phillips head self tapping mounting screws, 2 x 10mm Phillips screws.

  • Brand: JAMECO RELIAPRO
  • ASIN: B00R5C8A62

Futaba S9452 Digital Hi Speed/Torque Servo

Futaba S9452 Digital Hi Speed/Torque

This is the S9452 Digital Hi-Speed.Hi-Torque Servo for many applications, especially, On-Road Touring Car Use and Comes with "J" Connector Installed. This servo is designed to be used with 6V receiver packs. This servo replaced the S9451 servo. FEATURESDigitally Enhanced Microprocessor Cut About half the Response TimeFrom Transmitter Input To Servo Reaction.Coreless Motor with two ball bearings on output shaftMetal GearsHigh TorqueCase is Made of Black Plastic with newly developed mounting flangesDust and Water Resistant (Not Waterproof) INCLUDESOne Digital Car/Boat Servo w/Small Round HornTwo Rectangular GrommetsFour Brass Bushings (eyelets)One Small Round Horn (already mounted on the servo)One Three Arm HornOrder FUTM2250 if mounting screws are needed SPECIFICATIONSSpeed: .13 sec/60 @ 4.8V.11 sec/60 @ 6VTorque: 102 oz-in (7.4 kg/cm) @ 4.8V128 oz-in (9.2 kg/cm) @ 6VWeight: 1.8oz (50g)Dimensions: 1.6 x 0.8 x 1.4" (40 x 20 x 34mm)

  • Color: black
  • Brand: Futaba
  • ASIN: B0015H6ERK

Spektrum A6300 Hv Torque Bl Mg Air Servo Aircraft Servo

Spektrum A6300 Hv Torque Bl Mg Air Servo

Key Features High Voltage (HV) capable (6.0-8.4v input range) Outstanding torque and speed in a standard servo size (530 oz-in and .10 sec/60° @8.4v) Durable and long lasting brushless motor Low wear and tightly meshed all metal gear train Dual bearing supported drive train helps maximize smooth operation Aluminum servo case helps keep operating temperatures low Soft start helps prevent component and airframe damage during un-intentional initializations Over Current and Temperature protection Helpful initialization start tone lets pilot know when the servo is ready Integrated servo failsafe holds last known position if signal is lost and power is maintained Frequency : 200hz to 333hz Overview The A6300 is the first in an evolving line of Spektrum brushless servos that provide leading edge performance with uncompromised reliability. Boasting an extremely powerful 530 oz-in torque and a lightning fast .10 sec/60° transit time @8.4v, the A6300 will make RC enthusiasts take a second look at Spektrum Servos. The A6300 features a top of the line brushless drive train that is recognized as being exceptionally strong and reliable. This durability is expertly matched with a low wear, all metal gear train that is virtually slop free. All housed in a heatsinking, all-aluminum case wit...

  • Brand: Spektrum
  • ASIN: B073MG2P9M
  • UPC: 605482087732

Kyosho Perfex KS4031-06W Servo

Kyosho Perfex KS4031-06W

This is the Kyosho Perfex KS4031-06W Metal Gear Servo. This is the replacement steering servo for the Kyosho MP9 ReadySet and MadForce Krusier 2.0, but is a good low cost alternative for any application that could benefit from a plastic gear servo with 83oz-in of torque. Package includes three servo horns, rubber grommets and horn mounting hardware. Specifications:Torque: 83.32 oz-in (6kg-cm) Speed: 0.15 @6.0V

  • ASIN: B00YB9ATI4

Futaba FSH50 Accy Package S3003 Servo

Futaba FSH50 Accy Package S3003

FSH50 Servo Accy Package S3003

  • Brand: Futaba
  • ASIN: B0015H1B0U
  • UPC: 885176133789

Axial 1/10 SCX10 Jeep Wrangler C/R * TACTIC TSX45 HIGH TORQUE METAL GEAR SERVO *

Axial 1/10 SCX10 Jeep Wrangler C/R * TACTIC

Axial 1/10 SCX10 Jeep Wrangler C/R Edition 4WD (Model AX90035) Tactic TSX45 High Torque Metal Gear Steering ServoMSRP: $29.99Local Hobby Shop: $21.99Dollar Hobbyz: Up to 95% Off MSRP! More Truck For Your Buck Since 2002!This Product Includes: Tactic TSX45 Standard High Torque Metal Gear Servo (Part # TACM0245 Partial) Horns, Grommets, Eyelets, and Mounting Screws Not Included Specifications 4.8v - 6.0v Torque: 143 oz-in (10.3 kg-cm) - 151 oz-in (10.9kg-cm) Speed: 0.167sec/60 degrees @ 6V Dimensions: 1.6x0.8x1.5" (40x20x38mm) Weight: 1.8oz (51g)Product Notice: This product is NEW in OEM Dollar Hobbyz Packaging and is from a NewAxialAxial 1/10 SCX10 Jeep Wrangler C/R Tactic TSX45 High Torque Metal Gear Steering ServoSCX10 Jeep Wrangler C/R. Due to disassembled nature of our products, some parts may show very slight signs of disassembly. The parts included with this product are exclusive to what is pictured above. Part Numbers are for reference only.Technical and Warranty Information: Technical and Warranty issues are handled by the manufacturer's Technical Support Team, per Manufacturer's requirements. When purchasing from Dollar Hobbyz, buyer agrees to contact manufacturer for all warranty issues and replacements.International Buyer Notice: All Import/Customs/VAT Fees are the resp...

  • Brand: AXIAL
  • ASIN: B00QA3C3XI
  • UPC: 015568420603

Yoton Accessories 10pcs/lot RC High Torque Metal Gear 13kg Digital Servo for Radio Control car

Yoton Accessories 10pcs/lot RC High Torque Metal Gear

rc servo 58g standard size digital servo with coreless motor,metal gear,HV servo Features:-Standard digital metal gears 25T servo,2BB-Coreless motor,Aluminium middle case-Waterproof-Operating Voltage: 4.8V~7.4V-Dead band width: 2usc-Interface: (JR)-Wire length: 30cmSpecifications:Item No.:DM-CLS130MDWeight:70gSize:40*20*37mm Speed:0.11sec/60degree at(6v) 0.09sec/60degree at(7.4v)Stall Torque:13kg.cm.at(6v) 16.5kg.cm.at(7.4v) Operating Voltage:6v-7.4v Futaba,JR,SANWA,Hitec compatible.Size (mm) Weight Wire 6V 7.4V Rotation angle Speed Torque Speed Torque L W H g oz cm sec/60okg-cm oz-in sec/60okg-cm oz-in 40.0 20.0 37 70.0 30.0 0.11 13 0.09 16.5 120degree Packing include : 10pcsXDM-CLS130MD servo Accessaries:servo horns,rubber grommets, eyelets and mounting screws Important Notes:1,Specify the connector type when you purchase the servo. 2,Refer to the figure when installing the servo accessories. 3,For engine powered airplanes and boats, rubber must be used to reduce vibration. 4,Please choose correct model for your application. 5,Torque over-loaded will damage the servo's mechanism-. 6,Keep the servo clean and away from dust, corrosive gas and humid air. Online store: Shipping:About Shipping: Usually it takes 2-7 business days to deliver it and choose the best way to ship to yo...

  • Brand: Yoton
  • ASIN: B07RNZP9BW
Similar Servo Mounting Grommets Results
Servo Mounting Grommets Video Reviews

Disappearing Servo Grommets, Eyelets and Screws

Servo Mounting Grommets

http://flyingrc.net/servoparts.html The full review has more photos and details such as pricing.

Tags: servo parts,servo grommets,servo eyelets

Servo Mounting Tech Tip - Grommet/Eyelet Orientation

Servo Mounting Grommets

Mounting your servo the correct way.

Tags:

Build An Animatronic Head: Servo Motor Installation - FREE CHAPTER

Servo Mounting Grommets

SUBSCRIBE on YouTube: http://bit.ly/Zp70T4 and RING THE BELL! Build an Animatronic Head: Servo Mo...

Tags: servo,servos,servo motor,servo motors,rc,radio ...

Installing Rubber Grommets on Hitec Servos

Servo Mounting Grommets

Stop motion video of me installing rubber grommets on HS-7954 hitec servos. Prepping these hitec...

Tags: rcairplanes,rcairplane,rcaircraft,rcbuild,rcbui...

What's New: ProTek R/C 155T & 155S Digital Metal Gear HV Servos

Servo Mounting Grommets

ProTek RC have introduced two powerful high-voltage, metal gear digital servos in the form of the...

Tags: amain,amainhobbies,amainhobbies.com,amain.com,a...