Robinson Racing Hard 5MM BORE(.8) Pinion 19T 8719

Robinson Racing Hard 5MM BORE(.8) Pinion 19T

HARD 5MM BORE(.8) PINION 19T

  • Brand: Robinson Racing
  • ASIN: B000CK3MG2
  • UPC: 719696087195

Robinson Racing Products 8713 Hard Bore 0.8 Module Pinion Gear, 13T, 5mm

Robinson Racing Products 8713 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B0019OJ660
  • UPC: 719696087133

Robinson Racing Products 8717 Hard Bore 0.8 Module Pinion Gear, 17T, 5mm

Robinson Racing Products 8717 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B0019OHK4A
  • UPC: 787793305054

Robinson Racing Products 8715 Hard Bore 0.8 Module Pinion Gear, 15T, 5mm

Robinson Racing Products 8715 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B0019OHK2M
  • UPC: 716080198666

Robinson Racing Products Extra Hard Steel 5mm Bore 1 Module Pinion, 15T, RRP1215

Robinson Racing Products Extra Hard Steel 5mm Bore

OverviewExtra Hard Steel 5mm Bore (1.0 module) Brushless Motor Pinions. One 4x4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. These pinions mate with most 1/8 scale nitro spur gears.5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.

  • Brand: Robinson Racing
  • ASIN: B0015BLTRG
  • UPC: 885790023848

Robinson Racing 1211 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 11 Tooth

Robinson Racing 1211 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BLRG4
  • UPC: 719696012111

Robinson Racing 8725 Hard 5Mm Bore(.8) Pinion 25T

Robinson Racing 8725 Hard 5Mm Bore(.8) Pinion

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B000CJXLY6
  • UPC: 719696087256

Robinson Racing 2017 Hard 48 Pitch Machined 17T Pinion 5Mm Bore

Robinson Racing 2017 Hard 48 Pitch Machined 17T

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00681QH1Q
  • UPC: 719696020178

Robinson Racing 8720 Hard 5Mm Bore(.8) Pinion 20T

Robinson Racing 8720 Hard 5Mm Bore(.8) Pinion

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0019OHK6I
  • UPC: 782675180248

Robinson Racing Products 8721 Hard Bore 0.8 Module Pinion Gear, 21T, 5mm

Robinson Racing Products 8721 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B0019OE0P2
  • UPC: 885221422080

Robinson Racing 1220 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 20 Tooth

Robinson Racing 1220 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BNZYQ
  • UPC: 719696012203

Robinson Racing 1219 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 19 Tooth

Robinson Racing 1219 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BS8TS
  • UPC: 719696012197

Robinson Racing 1213 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 13 Tooth

Robinson Racing 1213 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0015BLRHI
  • UPC: 719696012135

Robinson Racing 8718 Hard 5Mm Bore(.8) Pinion 18T

Robinson Racing 8718 Hard 5Mm Bore(.8) Pinion

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0019OCA7W
  • UPC: 719696087188

Robinson Racing 2025 Hard 48 Pitch Machined 25T Pinion 5Mm Bore

Robinson Racing 2025 Hard 48 Pitch Machined 25T

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00681QIF6
  • UPC: 719696020253

Robinson Racing 1218 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 18 Tooth

Robinson Racing 1218 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B000CJZ0W2
  • UPC: 719696012180

Robinson Racing 2020 Hard 48 Pitch Machined 20T Pinion 5Mm Bore

Robinson Racing 2020 Hard 48 Pitch Machined 20T

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00AU29OS2
  • UPC: 719696020208

Robinson Racing 1212 Extra Hard High Carbon Steel Motor Pinion Gear, 5Mm Bore, 1.0 Mod Pitch, 12 Tooth

Robinson Racing 1212 Extra Hard High Carbon Steel

Extra hard high carbon motor pinions are built to last with our hi-performance GEN3 steel slipper units. Made from high carbon steel and then heat treated to increase the hardness of the surface even further. High carbon steel is naturally lower in friction and adhesion than milder grades of steel making these gears ideal for use with metal spur gears. All pinions precision machined and stamped with the number of teeth. One 4 m/M set Screw included. 2 m/M Allen wrench (not included) Fits the 4 m/M set Screw. Can be run on motors using a 5 M/M motor shaft including Traxxas, associated, and Hei models or for any heavy duty application. Tech note: rrp#1200 5 m/M to 1/8 inch reducer sleeve required for 1/8 inch shaft motors.

  • Color: Brown/A
  • Brand: Robinson Racing Products
  • ASIN: B000CHSHQU
  • UPC: 719696012128

HARD 48 PITCH MACHINED 33T PINION 5MM BORE 2033

HARD 48 PITCH MACHINED 33T PINION 5MM BORE

HARD 48 PITCH MACHINED 33T PINION 5MM BORE

  • Brand: Robinson Racing
  • ASIN: B00681QJOQ
  • UPC: 719696020338

Robinson Racing 8723 Hard 5Mm Bore(.8) Pinion 23T

Robinson Racing 8723 Hard 5Mm Bore(.8) Pinion

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B000CK3LSQ
  • UPC: 719696087232

Robinson Racing Products 8712 Hard Bore 0.8 Module Pinion Gear, 12T, 5mm

Robinson Racing Products 8712 Hard Bore 0.8 Module

OverviewExtra hard high carbon brushless motor pinions are built to last with hi-performance GEN3 steel slipper units. Pinion is precision machined and stamped with the number of teeth. One 4mm set screw included. 2mm allen wrench (not included) fits the 4mm set screw. Can be run on cars using a 5mm motor shaft. 5mm to 1/8 inch Reducer Sleeve required for 1/8 inch shaft motors.Note: 32 pitch and .8 module gears can be used together with no adverse affects such as increased noise or increased wear. The difference is that .8 module gears have a slightly larger outside diameter per tooth, roughly .00027 of an inch.

  • Brand: Robinson Racing Products
  • ASIN: B000CJZIWE
  • UPC: 719696087126

Robinson Racing 8714 Hard 5Mm Bore(.8) Pinion 14T

Robinson Racing 8714 Hard 5Mm Bore(.8) Pinion

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B0019OFTC0
  • UPC: 719696087140

Robinson Racing Products 48 Pitch Machined Pinion, 35T, RRP2035

Robinson Racing Products 48 Pitch Machined Pinion, 35T,

Overview5mm bore

  • Brand: Robinson Racing
  • ASIN: B00681QJVE
  • UPC: 719696020352

Robinson Racing 2022 Hard 48 Pitch Machined 22T Pinion 5Mm Bore

Robinson Racing 2022 Hard 48 Pitch Machined 22T

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B00AU29PCC
  • UPC: 719696020222
Similar Robinson Racing 5mm Bore Results
Robinson Racing 5mm Bore Video Reviews

R/C Help: Pinion Gears - Bore Size

Robinson Racing 5mm Bore

In this episode of R/C Help, we discuss the Bore Size of pinion gears and how to select the corre...

Tags: AMain,Hobbies,amainhobbies,amain.com,amainhobbi...

R/C Help: Pinion Gears - Materials

Robinson Racing 5mm Bore

In this episode of R/C Help, we discuss pinion gear material options, and why you would choose on...

Tags: AMain,Hobbies,amainhobbies,amain.com,amainhobbi...

R/C Help: Pinion Gears - Tooth Count

Robinson Racing 5mm Bore

In this episode of R/C Help, we discuss pinion gear tooth count and how to select the appropriate...

Tags: AMain,Hobbies,amainhobbies,amain.com,amainhobbi...

R/C Help: Pinion Gears - Gear Pitch

Robinson Racing 5mm Bore

In this episode of R/C Help, we discuss pinion gear Pitch and how to select the correct Pitch for...

Tags: AMain,Hobbies,amainhobbies,amain.com,amainhobbi...

Arrma typhon 3s BLX- HR metal spur and adjustable motor mount

Robinson Racing 5mm Bore

Installation Hot Racing metal spur gear and adjustable motor mount with 20T pinion Hot Racing SAT...

Tags: Arrma,arrma typhon 3s blx,hot racing,hot racing...