3/8 inch by 16 tpi Brass Threaded Inserts- 3/8 inch by 16 tpi Internal Threads - Ideal For Wood turners and General Contractors Pack of 10

3/8 inch by 16 tpi Brass Threaded Inserts-

The Savannah Threaded Inserts are designed to be embedded into various materials so that a 3/8" x 16 bolt or stud can be threaded into the material. Works exceptionally well in harder materials such as resins, acrylics and hardwoods. Of course the inserts can also be used in softer materials as well such as softwoods and some plastics. While you could always tap a thread into to your material, that method tends to wear out and strip over time. Using an insert proves to be easier as well as more durable over time. Simply drill a ½" hole and and push the insert inside the hole. Each insert is actually smaller at one end than the other. The smaller (smooth end) end goes into the hole first, then you must firmly press the remainder of the insert into the hole. It is recommended that a good adhesive is used such as an epoxy or a c/a glue to keep the insert locked in the hole. The inserts are made from solid brass and have a knurled larger end to help provide a better grip when being inserted into the hole. Threaded inserts like these are ideal for woodworking projects like bottle stoppers where a 3/8" threaded hole is common place. The inserts however, can be used on any project where something needs a shallow 3/8" threaded hole. Sold in packs of 10.

  • Color: Gold
  • Brand: Savannah
  • ASIN: B07N7PBXY4
  • UPC: 817918020873

Press-in Threaded Inserts, 2-56 Int. THD .156 Int. Lg, Diamond knurling(Pack of 50)

Press-in Threaded Inserts, 2-56 Int. THD .156 Int.

Made from brass. Press or hammer the insert into a drilled hole, then install a screw to expand the insert and drive the knurls into the surrounding plastic to keep it secure

  • Brand: runxinhong
  • ASIN: B07JG3SL71
  • UPC: 193291020502

Uxcell a16041800ux0827 M3 x 5mm x 5.3mm Brass Cylindrical Knurled Threaded Insert Embedded Nuts 100PCS

Uxcell a16041800ux0827 M3 x 5mm x 5.3mm Brass

Made of bass material. Featured with heat resistance. Used on injection molding for tightly fixing. No need to counter bore or countersink the Boss hole because the insert has guide pilot.

  • Brand: uxcell
  • ASIN: B01IZ1RN0A
  • UPC: 602451760702

EZ Lok 260-4-BR, 1/4-20 Flanged Press Insert, Brass - Lot of 25

EZ Lok 260-4-BR, 1/4-20 Flanged Press Insert, Brass

1/4-20 x .500" long Brass thread insert, press-in installation in thermoset plastics, Flanged.

  • Brand: E-Z LOK
  • ASIN: B06XGZ34K6
  • UPC: 839137005516

EZ Lok 240-M3-BR, M3-0.5 Flush Press Insert, Brass - Lot of 50

EZ Lok 240-M3-BR, M3-0.5 Flush Press Insert, Brass

M3-0.5 x .188" long Brass thread insert, press-in installation in thermoset plastics.

  • Brand: E-Z LOK
  • ASIN: B06XGXFM21
  • UPC: 839137005370

OCR M2 M3 M4 M5 Female Thread Knurled Nuts 330PCS Brass Threaded Insert Embedment Nuts Assortment Kit

OCR M2 M3 M4 M5 Female Thread Knurled

Product Description: High quality knurled thread inserts nuts assortment kit. Can be widely used on the injection moulding for tightly fixing. The material of this part is brass and it can resist heat. Organized by size in a transparent storage case for quick access and protection. Package includes: 30PCS M2x4x3.5 30PCS M2x6x3.5 30PCS M2x8x3.5 20PCS M2x10x3.5 30PCS M3x4x5 30PCS M3x6x5 20PCS M3x8x5 20PCS M3x10x5 30PCS M4x4x6 20PCS M4x6x6 20PCS M4x8x6 15PCS M4x10x6 15PCS M5x6x7 10PCS M5x8x7 10PCS M5x10x7

  • Brand: OCR
  • ASIN: B07CYPNY4P

EZ Lok 240-002-BR, 2-56 Flush Press Insert, Brass - Lot of 50

EZ Lok 240-002-BR, 2-56 Flush Press Insert, Brass

2-56 x .156" long Brass thread insert, press-in installation in thermoset plastics.

  • Brand: E-Z LOK
  • ASIN: B06XGVX3HX
  • UPC: 839137005196

[initeq] M3-0.5 Threaded Heat Set Inserts for 3D Printing (50, Long)

[initeq] M3-0.5 Threaded Heat Set Inserts for 3D

Tapered threaded brass inserts for 3D Printing Easy to set in an appropriately-sized hole in the part using a soldering iron. Numerous vanes and ridges around the insert allow plastic to flow between them, creating a tough bond with the printed part. This is a much more versatile, durable, professional, and attractive solution than "captive nuts" and other solutions commonly employed when the need for metal threads in printed parts arises. One primary advantage these provide is the ability to design and print assemblies in multiple component pieces that attach with metal fasteners. This means that you can create products larger than the print volume your printer supports, and that failed prints often result in less waste due to only one part of a larger assembly failing. This also typically results in more "polished", professional-looking designs. Specifications: Thread Pitch: M3-0.5 OAL (length): 6.35mm D1 (top): 5.6mm D2 (bottom): 4.83mm Please allow enough time for heat to transfer from the iron to the insert - maximum strength is achieved when the plastic can fully flow around the insert.

  • Color: Gold
  • Brand: initeq
  • ASIN: B077CHFGVT
  • UPC: 810673030279

Press-in Threaded Inserts, 8-32 Int. THD.313 Lg,Diamond knurling(Pack of 50)

Press-in Threaded Inserts, 8-32 Int. THD.313 Lg,Diamond knurling(Pack

Press-in Threaded Inserts, 8-32 Int. Thd., .313 Lg.,Diamond knurling

  • Brand: runxinhong
  • ASIN: B07H5K4FVR
  • UPC: 193291020380

Uxcell a16041800ux0833 M3 x 4mm x 4.3mm Brass Knurled Threaded Round Insert Embedded Nuts 100PCS

Uxcell a16041800ux0833 M3 x 4mm x 4.3mm Brass

Made of bass material. Featured with heat resistance. Used on injection molding for tightly fixing. No need to counter bore or countersink the Boss hole because the insert has guide pilot.

  • Brand: uxcell
  • ASIN: B01IYWUUH8
  • UPC: 602451761235
Similar Press Insert Results
Press Insert Video Reviews

Heat Set Insert Press

Press Insert

In this project we're building a rig for installing heat set inserts. Use 3D printed parts and ha...

Tags: adafruit,3d printing,2020 aluminum,extrusion,ro...

How To: Drill Press Table - Replaceable Insert

Press Insert

Don shows one method for making a replaceable insert for a drill press table. For free plans for ...

Tags: Woodworking,DIY,How To,furniture,making,buildin...

Press in insert machine

Press Insert

This is A machine I designed and built to press in a insert in a EMT connector

Tags: Insert machine,Machine design

Paper Bean Press | Insert Review

Press Insert

Hello Everyone! I'm really excited to share this review with all of you. Rachel is so enthusiasti...

Tags: copic,lepen,fountain pen,kaweco,paper bean pres...

Heat Set Nut Insert and mini Drill Stand Press

Press Insert

You can print the object See more here - https://www.thingiverse.com/thing:3158065 Model mini-dr...

Tags: 3D print,Stand Press,mini Drill,Nut Insert,Heat...