O1 Tool Steel Sheet, Precision Ground, Annealed, 1/8" Thickness, 2" Width, 18" Length

O1 Tool Steel Sheet, Precision Ground, Annealed, 1/8"

The O1 tool steel sheet has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 specifications, and has a standard tolerance. The O1 tool steel grade has better machinability than A2 tool steel. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The sheet has been ground to achieve the precise shape and size.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting e...

  • Brand: Small Parts
  • ASIN: B000FMYFVI
  • UPC: 049659540062

O1 Tool Steel Rectangular Bar, Precision Ground, ASTM A681/SAE J437, 1/8" Thickness, 1-1/2" Width, 18" Length

O1 Tool Steel Rectangular Bar, Precision Ground, ASTM

The O1 tool steel rectangular bar has been precision ground, meets American Society for Testing and Materials International ASTM A681 and Society of Automotive Engineers SAE J437 specifications, and has a standard tolerance. The O1 tool steel grade has better machinability than A2 tool steel. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The bar has been ground to achieve the precise shape and size.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardn...

  • Brand: Small Parts
  • ASIN: B0036TGYIO
  • UPC: 698158301065

O1 Tool Steel Barstock (annealed) 1/8" x 1-1/4" x 12"

O1 Tool Steel Barstock (annealed) 1/8" x 1-1/4"

O1 is an oil quenching steel, with an alloy of 1.0% carbon, 1.25% manganese, 0.5% chromium, 0.5% silicon, 0.5% tungsten, and trace amounts of phosphorus and sulphur. This steel is annealed and precision ground. The end is painted red for identification purposes in our shop.

  • Brand: Texas Knifemakers Supply
  • ASIN: B074PD52VK

O1 Tool Steel Barstock (annealed) 1/4" x 2" x 12"

O1 Tool Steel Barstock (annealed) 1/4" x 2"

O1 is an oil quenching steel, with an alloy of 1.0% carbon, 1.25% manganese, 0.5% chromium, 0.5% silicon, 0.5% tungsten, and trace amounts of phosphorus and sulphur. This steel is annealed and precision ground. The end is painted red for identification purposes in our shop.

  • Brand: Texas Knifemakers Supply
  • ASIN: B074PCK2ZN

RMP Knife Blade Steel - 1095 High Carbon Annealed Steel, Knife Making Billet, 1.5 Inch x 12 Inch x 0.187 Inch

RMP Knife Blade Steel - 1095 High Carbon

Create your own custom knife that will last a lifetime. Made from high carbon steel, this RMP knife billet sharpens easily, resists chipping, and holds a great edge.

  • Brand: RMP
  • ASIN: B073SKZZ3J
  • UPC: 765908468665

O1 Tool Steel Sheet, Precision Ground, Annealed, Oversized Tolerance, 1/4" Thickness, 1/2" Width, 18" Length

O1 Tool Steel Sheet, Precision Ground, Annealed, Oversized

The O1 tool steel sheet has been precision ground, meets American Society for Testing and Materials International ASTM A681 specifications, and has an oversized tolerance. The O1 tool steel grade has better machinability than A2 tool steel. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The sheet has been ground to achieve the precise shape and size.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting edge. Some t...

  • Brand: Small Parts
  • ASIN: B0050QWATS
  • UPC: 049659569728

Precision Brand 039-30040 Oil Hardening Ground Flat Stock, 1/16″ x 1/2″ O-1, 18″ Length, General Purpose Tool Steel, Pre-Ground to Close Tolerances

Precision Brand 039-30040 Oil Hardening Ground Flat Stock,

Precision Brand Ground Flat Stock is made from general purpose tool steel. Ideal material for tools, dies, punches, templates, stripper plates, and general precision machine parts. Pre-ground on all surfaces to close tolerances. An electric furnace melt tool steel. Fully spheroid zed structure. An oil hardening tool steel that maintains high abrasion and wear resistance. It is ready for tool room use and has excellent toughness and machinability characteristics.

  • Brand: Precision Brand
  • ASIN: B01LZSC6SU

O1 Tool Steel Barstock (annealed) 3/16" x 1-1/2" x 12"

O1 Tool Steel Barstock (annealed) 3/16" x 1-1/2"

O1 is an oil quenching steel, with an alloy of 1.0% carbon, 1.25% manganese, 0.5% chromium, 0.5% silicon, 0.5% tungsten, and trace amounts of phosphorus and sulphur. This steel is annealed and precision ground. The end is painted red for identification purposes in our shop.

  • Brand: Texas Knifemakers Supply
  • ASIN: B074PCDZ2V

01 Precision Ground Round Tool Steel - 3/4 diameter x 36 Inches

01 Precision Ground Round Tool Steel - 3/4

Known as the 'non-shrinking' tool steel O1 is a general-purpose tool steel that is typically used in applications where alloy steels cannot provide sufficient hardness, strength and wear resistance. Used for applications including stamps, jigs, cutters, saws, kives, and machined parts.

  • ASIN: B00YWCLRPE

O1 Tool Steel Round Rod, Precision Ground, Annealed, 0.5" Diameter, 36" Length

O1 Tool Steel Round Rod, Precision Ground, Annealed,

The O1 tool steel round rod has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 specifications, and has a standard tolerance. The O1 tool steel grade has better machinability than A2 tool steel. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The rod has been ground to achieve the precise shape and size.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high carbide content for wear resistance, high hardness, and the ability to hold a cutting...

  • Brand: Small Parts
  • ASIN: B0050RI88O
  • UPC: 049659683318

O1 Tool Steel Round Rod, Polished Finish, Precision Ground, Precision Tolerance, 1/8" Diameter, 36" Length

O1 Tool Steel Round Rod, Polished Finish, Precision

The O1 tool steel round rod has been precision ground and polished, meets American Society for Testing and Materials International ASTM A681 and Society of Automotive Engineers SAE J437 specifications, and has a precision tolerance. The O1 tool steel grade has better machinability than A2 tool steel. It must be hardened in oil, which can be done at relatively low temperatures for good dimensional stability. The polished finish offers a smooth surface with few imperfections. The rod has been ground to achieve the precise shape and size.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number ...

  • Brand: Small Parts
  • ASIN: B0035FZXLI
  • UPC: 698158281374

01 Precision Ground Flat Tool Steel - 3/16 x 1 3/4 x 36 Inches

01 Precision Ground Flat Tool Steel - 3/16

Known as the 'non-shrinking' tool steel O1 is a general-purpose tool steel that is typically used in applications where alloy steels cannot provide sufficient hardness, strength and wear resistance. Used for applications including stamps, jigs, cutters, saws, knives, and machined parts.

  • ASIN: B00YWCGGBY

RMP Knife Blade Steel - High Carbon Annealed, 1095 Knife Making Billets, 12 Inch x 12 Inch x 0.187 Inch

RMP Knife Blade Steel - High Carbon Annealed,

Create your own custom knife that will last a lifetime. Made from high carbon steel, this RMP knife billet sheet allows you to cut your own billets, and then sharpens easily, resists chipping, and holds a great edge.

  • Brand: RMP
  • ASIN: B073SKSM21
  • UPC: 765908468672

1/4" Dia. x 36" Lg. O-1 Oil Harden Drill Rod (1 Each)

1/4" Dia. x 36" Lg. O-1 Oil Harden

Inch - All rods come in 36" lengths and are AISI/SAE. Available in the following types: O-1 Oil-hardening for general tool room use. Good nondeforming characteristics. Moderate resistance to abrasion. Machinability 90%. S-7 Air-hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. Machinability 95%. A-2 Air-hardening. Maximum abrasion resistance. Machinability 65%. D-2 Air-hardening. High carbon, high chrome, high wear resistance. Machinability 50%. W-1 Water hardening offers a combination of high abrasion resistance and toughness when hardened. Machinability 100%.

  • Brand: RSC
  • ASIN: B002SKSJQM

1/8" Dia. x 36" Lg. O-1 Oil Harden Drill Rod (1 Each)

1/8" Dia. x 36" Lg. O-1 Oil Harden

Inch - All rods come in 36" lengths and are AISI/SAE. Available in the following types: O-1 Oil-hardening for general tool room use. Good nondeforming characteristics. Moderate resistance to abrasion. Machinability 90%. S-7 Air-hardening molybdenum, chromium, shock resisting. High impact strength with moderate wear resistance. Machinability 95%. A-2 Air-hardening. Maximum abrasion resistance. Machinability 65%. D-2 Air-hardening. High carbon, high chrome, high wear resistance. Machinability 50%. W-1 Water hardening offers a combination of high abrasion resistance and toughness when hardened. Machinability 100%.

  • Brand: RSC
  • ASIN: B002SKQY0U

W1 Tool Steel Round Rod, Polished Finish, Precision Ground, Precision Tolerance, 1/2" Diameter, 36" Length

W1 Tool Steel Round Rod, Polished Finish, Precision

The W1 tool steel round rod has been precision ground and polished, meets American Society for Testing and Materials International ASTM A686 and Society of Automotive Engineers SAE J437 specifications, and has a precision tolerance. The W1 tool steel grade has high carbon content for hardness and provides excellent machinability when hardened in water following heat treatment. The polished finish offers a smooth surface with few imperfections. The rod has been ground to achieve the precise shape and size.Steel is an iron alloy with carbon and other elements that modify the steel to achieve specific properties. In general, steels with higher carbon content have greater strength, hardness, and wear resistance, while those with lower carbon content have more formability, weldability, and toughness. Carbon steels, which include most AISI-SAE grades in the 1000 range, are classified by their level of carbon content as low (below 0.3%), medium (0.3% to 0.6%) and high (0.6% and above). Alloy steels, which include AISI-SAE grades in the 1300 and 4000 ranges and above, incorporate elements such as chromium, molybdenum, and nickel to modify properties like machinability and corrosion resistance. Tool steels, which include most grades with a letter and number grade designation, have high ca...

  • Brand: Small Parts
  • ASIN: B001HWB1JO
  • UPC: 698158180578

RMP Knife Blade Steel - High Carbon Annealed, 1095 Knife Making Billets, 1.5 Inch x 12 Inch x 0.187 Inch, 3 Pack

RMP Knife Blade Steel - High Carbon Annealed,

Create your own custom knife that will last a lifetime. Made from high carbon steel, this RMP knife billet sharpens easily, resists chipping, and holds a great edge.

  • Brand: RMP
  • ASIN: B0752XNRYX
  • UPC: 765908468856

Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap (4oz)

Dykem 80300 Steel Blue Layout Fluid, Brush-in-Cap

The Dykem 80300 Steel Blue layout fluid is used to coat metal to provide a glare-free, uniform color so scribes appear clear and sharp. This product is a transparent, blue stain. It can also be used on other surfaces to reveal defects or pinholes, or view gear tooth contact pattern. It provides a thin film without cracking or chipping and dries in minutes for convenience. It comes in a bottle containing 4 oz. of fluid. The bottle has a brush in the lid that can be used to apply the solution.Dykem manufactures marking systems including layout fluid, staining colors, thinner, remover, and mark and code pens. Established in 1920, Dykem was acquired in 1987 by Illinois Tool Works (ITW), now ITW Professional Brands. ITW Professional Brands is headquartered in Olathe, KS.

  • Color: Steel Blue
  • Brand: Dykem
  • ASIN: B0018ACR6G
  • UPC: 094702815314

01 Precision Ground Round Tool Steel - 1/2 diameter x 36 Inches

01 Precision Ground Round Tool Steel - 1/2

Known as the 'non-shrinking' tool steel O1 is a general-purpose tool steel that is typically used in applications where alloy steels cannot provide sufficient hardness, strength and wear resistance. Used for applications including stamps, jigs, cutters, saws, kives, and machined parts.

  • ASIN: B00YWCL4G6

01 Precision Ground Flat Tool Steel - 3/32 x 3 x 36 Inches

01 Precision Ground Flat Tool Steel - 3/32

Known as the 'non-shrinking' tool steel O1 is a general-purpose tool steel that is typically used in applications where alloy steels cannot provide sufficient hardness, strength and wear resistance. Used for applications including stamps, jigs, cutters, saws, knives, and machined parts.

  • ASIN: B00YWCF58E
Similar O1 Tool Steel Results
O1 Tool Steel Video Reviews

The O-1 Tool Steel Controversy

O1 Tool Steel

Today's vlog: is O-1 tool steel a good steel for the beginning knifemaker? Check out TrueNorthMi...

Tags: knifemaking,knifemker,how to make a knife,makin...

How to heat-treat an O1 knife blade using cheap common tools.

O1 Tool Steel

THIS PROCESS CAN BE DANGEROUS! WEAR GAUNTLETS, SAFETY GOGGLES AND AN APRON AT ALL TIMES! Heat-tr...

Tags: Heat Treating,Tool Steel (Material),Knives,knif...

Guide to Tool Steel for Knife Makers

O1 Tool Steel

Tool steel. What is it and why should knife makers be interested? Plenty of info here for machi...

Tags: steel,tool,01,D2,A2,knife making,how to,maker,g...

Edge Retention Test! - 01 Tool Steel - Tindall Knives

O1 Tool Steel

Remember to subscribe for more lunacy - hit the bell etc! https://teespring.com/knife-lab-2019-m...

Tags: Knife,EDC,Tool,Survival,Bushcraft,review,Blade,...

Heat treating O1 Steel and grain growth

O1 Tool Steel

I get asked quite often about heat treating O1 tool steel. While it is relatively simple in annea...

Tags: Heat treating O1 steel,how to heat treat steel,...