UoUo ~ for Nokia 5 TA-1024 TA-1027 TA-1044 TA-1053 LCD Display Touch Screen Digitizer Repair Replacement Glass Lens
UoUo ~ for Nokia 5 TA-1024 TA-1027 TA-1044
Suitable For Nokia 5 TA-1024 TA-1027 TA-1044 TA-1053 Full LCD Display+ Touch Screen Digitizer Assembly, No Frame Generic Tools Will Be Sent As Gift, Instructions Not Included, Please Noted Any Further Questions, Please Feel Free To Let Us Know, We Are Always Here To Help You
- Brand: UoUo
- ASIN: B07PJJQSB7
- UPC: 710328144774
DAOKI 84X48 Nokia 5110 LCD Display Module blue backlight with PCB adapter for Arduino
DAOKI 84X48 Nokia 5110 LCD Display Module blue
Description: Nokia 5110 LCD Module, Arduino Compatible You will Need: ( NOT Included in this Listing ! ) Set of Two 1K Resistors ( For Safe Operation ) Set of Four 10K Resistors ( For Safe Operation ) Pin Connections 1. RST--------- reset. 2. CE------------chip selection. 3. DC-----------data/commands choice. 4. DIN-----------serial data line. 5. CLK------------serial Clock Speed. 6. VCC----------Power, 3.3V (Positive). 7. LIGHT--------- backlight control terminal. 8. GND-----------power negative. Specification: Power supply voltage: 2.7V- 3.3V Backlight Power Supply Voltage: 3.3V MAX 43.6mm x 43.1mm(width X height) 84 x 84 dot matrix LCD,can show 4 lines of characters, 12 Characters Per Line Feature: Uses Serial Peripheral Interface (SPI) to communicate with the microcontroller, only 8 signal lines including power and GND. Support different types of MCU (MicroController Unit) , such as Arduino, PICAXE, ARM, Raspberry PI etc. Transfer rate up to 4Mbps,can full speed write display data without waiting time. LCD controller/driver chip has been bound to LCD chip so the overall footprint of the LCD Module is Kept as small as possible. Has TWO Rows where header pins can be soldered for greater flexibility of use! Low power supply, the working current in normal situation is lower ...
- Brand: DAOKI
- ASIN: B01EE4VQYG
- UPC: 695259112095
HiLetgo 1.44" Colorful SPI TFT LCD Display ST7735 128X128 Replace Nokia 5110/3310 LCD
HiLetgo 1.44" Colorful SPI TFT LCD Display ST7735
1.44" Colorful SPI TFT LCD Display ST7735 128X128 Replace Nokia 5110/3310 LCD Feature: 100% brand new and high quality 1.44-inch screen with SPI serial backplane module, a minimum of only four IO-driven resolution 128 * 128 Spike NOKIA 5110, perfect upgrade true color Size: 1.44 inch SPI serial bus Resolution 128 * 128 Package included? 1*1.44" Colorful SPI TFT LCD Display ST7735 128X128 Replace Nokia 5110/3310 LCD
- Color: Red
- Brand: HiLetgo
- ASIN: B073R6SQRY
5.5inch for Nokia 6.1 LCD for Nokia 6 2018 SCTA-1043 TA-1045 TA-1050 TA-1054 TA-1068 Screen Display and Touch Assembly Replacement + Tool
5.5inch for Nokia 6.1 LCD for Nokia 6
Warm Notice1.Please remember to test the LCD before you install it. If there is any problem, contact us for a refund or exchange. Don't install it without any testing. 2.If you buy lcd without frame, pay attention to clear up well your old middle frame before combine them, otherwise, the lcd display may appear lumps and red line.3. If you are not professional, please ask a professional technical to help you.
- Color: for Nokia 6 6.1
- Brand: dxymn
- ASIN: B07L4KLPJ5
- UPC: 631514461188
DEVMO 8448 84x48 LCD Module White Backlight PCB Nokia 5110 Arduino Raspberry pi USA
DEVMO 8448 84x48 LCD Module White Backlight PCB
1. 84x48 dot matrix LCD, can show 4 lines of characters 2. Use serial interface communicate with the master processor, the number of interface signal line reduced greatly, only 8 signal lines including power and GND. 3. Support different types of MCU, such as for arduino, for AVR, for SPI, for MCS51 and so on. 4. Transfer rate up to 4Mbps, can full speed write display data without waiting time. 5. Can use the conductive glue to connect the module with the printed board, without cables. The metal hooks on the module can fix the module on the printed board, which is very easy to install and replace. 6. LCD controller/driver chip has been bound to LCD chip, the volume of LCD is small 7. Low power supply,the working current in normal situation is lower than 200μA and has power-down mode Connections: 1.RST--------- reset 2.CE---------- chip selection 3.DC---------- data/commands choice 4.DIN--------- serial data line 5.CLK--------- serial Clock Speed 6.3.3V-------- VCC 7.LIGHT------- backlight control terminal 8.GND--------- power negative
- Brand: DEVMO
- ASIN: B07R55C8PV
- UPC: 741722788608
LCD Display Module, 1.44" LCD Display Module with PCB 128X128 ColorTFT LCD Display Module for 5110/3310, TFT LCD Touch Screen
LCD Display Module, 1.44" LCD Display Module with
Features: 100% brand new and high quality This 1.44-inch LCD module uses ST7735 drive chip to drive 128x128 dot, with 128 x 128 resolution 1.44-inch screen with SPI serial module, a minimum of only four IO-driven resolution 128 * 128 Perfect upgrade true color, replace the black and white LCD screen for nokia 5110/3310 This TFT LCD Display Module comes With PCB plate Specification: Size:1.44" Resolution: 128X128 Drive IC:ST7735 Weight: Approx.11g/0.4oz Package list: 1 x LCD Display Module
- Brand: Wal front
- ASIN: B07KPYKP9C
- UPC: 794419479884
Goodyitou LCD Screen Display Digitizer Touch Panel Without Frame Screen Replacement for Nokia 6.1 Plus Nokia X6(Black)
Goodyitou LCD Screen Display Digitizer Touch Panel Without
Brand new Display Touch Screen Glass Digitizer Lens Assembly Compatible with Nokia 6.1 Plus Nokia X6 Not Includes Frame / Housing. This item often fixes the following problems: LCD Monitor does not work LCD is Cracked Touch Screen does not wo
- Color: Nokia 6.1 Plus (Black)
- Brand: Goodyitou
- ASIN: B07PQLLZ28
- UPC: 749235873293
Graphic LCD 84x48 - Nokia 5110
Graphic LCD 84x48 - Nokia
The Nokia 5110 is a basic graphic LCD screen for lots of applications. It was originally intended for as a cell phone screen. This one is mounted on an easy to solder PCB. It uses the PCD8544 controller, which is the same used in the Nokia 3310 LCD. The PCD8544 is a low power CMOS LCD controller/driver, designed to drive a graphic display of 48 rows and 84 columns. All necessary functions for the display are provided in a single chip, including on-chip generation of LCD supply and bias voltages, resulting in a minimum of external components and low power consumption. The PCD8544 interfaces to microcontrollers through a serial bus interface. Note: There may be small blemishes on these screens as they are surplus. Note: Your screen may or may not have a diode on the PCB. It does not affect performance and will vary depending on our shipment. Dimensions: 45x45mm Datasheet: http://www.sparkfun.com/datasheets/LCD/Monochrome/Nokia5110.pdf
- Brand: SparkFun
- ASIN: B00K8M6IL0
- UPC: 845156000937
JayTong LCD Display & Replacement Touch Screen Digitizer Assembly with Free Tools for Nokia 3.1/3 2018 TA-1049 TA-1057 TA-1063 TA-1070 Black
JayTong LCD Display & Replacement Touch Screen Digitizer
Note: - Replacing/repairing old, broken, cracked, damaged, touch is not working, touch response issues,non-functioned for LCD screen. - We strongly suggest test the item received before installation, pls don't remove protective film or tags when testing; Test steps: 1. clean the flex cable of screen and the slot of the motherboard before test; 2. connect new screen to the motherboard tightly; 3. make sure battery was charged fully, and pls also make sure your motherboard is not broken; 4. Power on ,tested finished. Please be careful during the installation process. Any problems, please contact us in time. Do not force the installation. Thank you.
- Color: Black
- Brand: JayTong
- ASIN: B07L2XX31Y
- UPC: 791262894130
MagiDeal 8448 Nokia 5110 LCD Display Screen Module for Arduino
MagiDeal 8448 Nokia 5110 LCD Display Screen Module
You will find what you want in Sports & Outdoors, Home & Kitchen, Beauty, Clothing, Health & Household, Tools & Improvement, Automotive Parts etc.Description: - 84 X 48 dot LCD,can show 4 lines of characters - Use serial interface communicate with the master processor,the number of interface signal line reduced greatly, only 8 signal lines including power and GND.Support different types of MCU,such as the SPI,MCS51 serial mode 0 of AVR.Transfer rate up to 4Mbps,can full speed write display data without waiting time. - Can use the conductive glue to connect the module with the printed board,without connecting cable.The metal hooks on the module can fix the module on the printed board,which is very easy to install and replace. - LCD controller/driver chip has been bound to LCD chip,the volume of LCD is small. - Low power supply,the working current in normal situation is lower than 200μA,and has power-down mode.Specification: - Power supply voltage: 2.7-3.3V,5V is OK, but part of the screen becomes black when tested - Data interface level: 2.7-5V - Backlight power supply voltage: highest 3.3V - Installation diameter: 2mm - Backlight: Blue - RST--reset - CE--chip selection - DC--data/commands choice - DIN--serial data line - CLK--serial Clock Speed - VCC--power supply 3.3V - BL--bac...
- Color: Multicolored
- Brand: non-brand
- ASIN: B07GRJCSJT
- UPC: 713239407464
Arduino Tutorial: Nokia 5110 84x48 LCD display, how to drive with Arduino
Arduino Tutorial: Nokia 5110 84x48 LCD display, how to drive with Arduino In this video we learn...
Arduino Tutorial: Menu on a Nokia 5110 LCD Display Tutorial
In this easy Arduino Tutorial we are going to learn how to create a Menu on a Nokia 5110 LCD disp...
Arduino Nokia 5110 LCD Tutorial #1 - Connecting and Initial Programming
Detailed tutorial on connecting and programming the Nokia 5110 LCD. In this first part I'm only c...
How to use the Nokia 5110 84X48 LCD display with Arduino
My Amazon recommended products: https://www.amazon.com/shop/garagegeekguy This is the Nokia 5110...
Nokia 100 101 display LCD light solution 1000% tested
NOKIA 100 101 display LCD light solution without ice only jumper solution .