881170A15 Boat Motor Side Mount Remote Control Box with 8 Pin for Mercury Outboard Engine PT, Right Hand

881170A15 Boat Motor Side Mount Remote Control Box

881170A15 Boat Motor Side Mount Remote Control Box with 8 Pin for Mercury Outboard Engine PT   Parameter: Engine Position: Outboard Fuel Type: Gasoline Condition: New Description: with power trim &15ft cable & Built-in warninghorn All parts are available in stock, we can ship it out within 1-2 business   This new aftermarket 881170A15 remote control box fits these models and components: Fits all current Mercury / Mariner outboards (with integral power trim) and1993 and newer Fits Force outboards 40hp and higher utilizing Mercury style cables(with power trim).    When used with MY2005 and newer 8/9.9/15/20 four-stroke outboards anadapter harness 84-892473A01 is required.  Remote Control cables need Gen I style to connect to control box.

  • Brand: SouthMarine
  • ASIN: B0785HZ5FY
  • UPC: 737123260034

Boat Motor 703-48207-22-00 Side Mount Remote Control Throttle Shift Box for Yamaha Outboard Engine 10 Pins, Right Hand

Boat Motor 703-48207-22-00 Side Mount Remote Control Throttle

Boat Motor 703-48207-22-00 Side Mount Remote Control Throttle Shift Box for Yamaha Outboard Engine 10 Pins, Right Hand REPLACES PART NUMBERS:703-48207-1A-10703-48207-1B-10703-48207-20-00703-48207-21-0THIS IS A "PUSH TO OPEN" CONTROL THIS 703 SIDE MOUNT CONTROL BOX WILL WORK WITH ALL 2-STROKE AND 4-STROKE MECHANICAL (CABLE) SHIFT YAMAHA OUTBOARD MOTORS THAT HAVE 10-PIN MAIN ENGINE HARNESSES AND "PUSH TO OPEN" THROTTLE.  Description: Functions of this Remote control assembly:New Type replaces all old 703 10pin boxesRIGHT HANDKey switch assembly with push-to-openSafety lanyard/emergency cut offTrim/tilt switch built in handle16ft, 10 pin wire harness assemblyFast-idle lever for quick warm-upThe handle position can be changed so it can be mounted on any one of the 2 sides All Parts included are same as the photo showsReplacement:This 703 aftermarket new type side mount control box replace these parts:703-48205-16-00 703-48205-17-00703-48207-17-10703-48205-A4-00703-48205-15-00703-48207-1A-10703-48207-1B-10703-48207-20-00703-48207-21-0703482071A10Application:This new type 703 aftermarket side mount control box will work with all Yamaha 4-stroke and 2-stroke mechanical cable shift outboards that have 10 pin harnesses and push to open throttle:2006 and Later 2-stroke Rigging...

  • Brand: SouthMarine
  • ASIN: B07BHFW62D

Mercury Top Mount Single Engine Outboard Motor Control w/Trim 8M0059686

Mercury Top Mount Single Engine Outboard Motor Control

Brand new, genuine Mercury Marine Top Console Mount Remote Control Kit. This is a factory original equipment part, not aftermarket. Fits: All current Mercury/Mariner outboards (with intergrated trim) and 1993 and newer Force outboards 40 hp and higher utilizing Mercury style cables (with power trim).

  • Brand: Mercury Marine
  • ASIN: B00A3I0D7E

BRP Johnson Evinrude Outboard Binnacle Remote Control

BRP Johnson Evinrude Outboard Binnacle Remote

Single lever binnacle control with trim for outboards 1996 and newer. Standard features include: BRP styling and design, improved throttle and shift control, easy toggle trim switch, simplified cable installation, adjustable throttle friction, push-button neutral warm up, and start-in-gear prevention. Includes pigtail harness for trim. Dashboard mounted ignition switch must be purchased separately.

  • Brand: BRP / OMC / Johnson Evinrude
  • ASIN: B001KXTXWW
  • UPC: 745419342142

SouthMarine Boat Engine Side Mount Remote Control Box 5006180 for Johnson Evinrude OMC BRP Outboard Motor

SouthMarine Boat Engine Side Mount Remote Control Box

This control box - Surface or Side Mount with Ignition Switch, Not include the adapter harnesses and control cables. The suitable wired for this control box: (1) 1996 and newer engine are suitable adapter harness modle: 0176339 12ft 0176340 15ft 0176341 20ft 0176342 28ft (2) Adapter harness 0768411 required for 1973-1995 engines and includes trim and tilt adapter.   (3) Pre 1979 engines require replacing the control cables with post 1979 control cables CC205XX. (4) Another option for an adapter harness that includes trim is CDI part number, 423-6344 (engine end only). This is an 18" extension harness for trim and tilt hook up. If converting a pre-1995 motor you may also need this male plug end #514685 and wedge pin #514682 to to convert the female plug to male plug complete the installation when using the existing boat side harness.  Standard Features: -Port or Starboard station mounting -Side of center console mounting -Accepts 1979 and newer control cables -Trim and tilt-Push-to-prime ignition key switch -Fast idle warm-up lever-Emergency cut -off switch and lanyard-Neutral lock-Start-in -gear prevention -Adjustable throttle friction -Warning horn included -Note: Not for use with Stern Drive applications

  • Brand: SouthMarine
  • ASIN: B07J4BTRX4

Popsport Top Mount Control Single Lever Top Mount Marine Controls Boat Single Engine Control for Throttle Gear Control (Top Mount Control)

Popsport Top Mount Control Single Lever Top Mount

Top Mount Control Single Lever Top Mount Marine Controls Boat Single Engine Control Introduction: The control system is mainly used for yachts, fishing boats and other water vehicles throttle and gear control, using a single handle to achieve control of the throttle and gear. Open the throttle step as follows: 1. Remove the lever. 2. Unlock the throttle and pull the flexible shaft. 3. Remove the swivel bracket. 4. Loosen the two (2) hex head screws at the link mechanism and remove the linkage. Make sure that the shift arm engagement teeth position is not changed. 5. Push the throttle arm toward the housing and rotate it 180 degrees until it bounces back. 6. Use the hex head screw to fasten the connecting rod mechanism to the desired position. 7. Insert the swivel bracket into the appropriate hole. 8. Re-install the push-pull flexible shaft and handle bar. Attention: When the controller is in neutral, the neutral safety switch is in the closed state. When the controller is in the normal working condition (neutral), the neutral safety switch is in the normally open state. Package Content 1 × Marine Throttle Gear Controller

  • Color: Top Mount Control
  • Brand: Popsport
  • ASIN: B071G116Y1
  • UPC: 719034826615

UFlex Single Lever Side-Mount Control For Mercruiser Stern Drives

UFlex Single Lever Side-Mount Control For Mercruiser Stern

This single-lever, dual-action control operates both throttle and shift. With a convenient trim switch located in the handle grip, this control can be mounted horizontally or vertically on either side of the boat. Features an adjustable brake tension release system, pull-out shift disengage, neutral safety switch, and positive lock-in neutral. This control includes the Mercury Connection Kit (item# 24428).

  • Brand: uflex
  • ASIN: B0064MTIYW
  • UPC: 702755038016

Mophorn 881170A15 Boat Motor Side Mount Remote Control Box with 8 Pin for Mercury Outboard Engine PT

Mophorn 881170A15 Boat Motor Side Mount Remote Control

The side mount remote control box 881170A15 with 8 pin 15ft harness. It has a new design, which includes soft grip and power trim leads for front mount switch. Fit for: Mercury Outboards 1993-2005 Newer Force outboards 40 hp Higher utilizing Mercury style cables Note: When used with 2005 and newer 8/9.9/15/20 hp 4 stroke outboards an adapter harness is required. Features: Brand New Condition This is a factory original equipment control, not aftermarket. New Design It includes soft grip and power trim leads for front mount switch. Wide Application For use with Mercury Outboards 1993-2005, 40 HP and higher utilizing Mercury style cables. Adapter Harness Required When used with 2005 and newer 8/9.9/15/20 HP 4 Stroke outboards an adapter harness is required. Gen I Style Remote Control cables need Gen I style to connect to control box. Warranty Come with 2-year warranty, good service you can own. Technical: Brand: Mophorn Condition: New Harness: 15ft Connector: 8pin Weight: 10.8lb (4.9kg) Dimensions (L* W* H): 16.9"*11"*5.5" (43*28*14cm) 1 x Side Mount Remote Control Box 881170A15 With 8 Pin For Mercury PT Boat Motor

  • Color: 881170A15
  • Brand: Mophorn
  • ASIN: B07LFXJ9P8
  • UPC: 601707199327

OEM BRP Johnson/Evinrude Single Lever Control W/ Key Switch 5006186

OEM BRP Johnson/Evinrude Single Lever Control W/ Key

Single lever binnacle control with trim and built in ignition switch for outboards 1996 and newer. Standard features include: BRP styling and design, Intigrated key switch and lanyard, improved throttle and shift control, easy toggle trim switch, simplified cable installation, adjustable throttle friction, push-button neutral warm up, and start-in-gear prevention. Includes pigtail harness for trim and ignition.

  • Brand: Johnson/Evinrude/OMC/BRP
  • ASIN: B001KXXXDC
  • UPC: 745419342159

VEVOR Top Mount Control Marine Boat Single Lever Handle Engine Control for Board Dual Action (top mount control boat)

VEVOR Top Mount Control Marine Boat Single Lever

Universal Top Mount Marine Boat Single Lever Handle Engine Control This is a drop in replacement for Morse MT3 single engine controls. Will also work to replace the Morse MT2 single engine controls but you will need to check your fit. It does not include a start in gear switch but this can be added. This control is not made by Morse but is a perfect fitting replacement! Item Specification: Item Location: New Dimension: 455 X 157.3 X 90.7mm Weight: 2.75kg Purpose: Throttle Gear Control Open the throttle step as follows: 1. Remove the lever. 2. Unlock the throttle and pull the flexible shaft. 3. Remove the swivel bracket. 4. Loosen the two hex head screws at the link mechanism and remove the linkage. Make sure that the shift arm engagement teeth position is not changed. 5. Push the throttle arm toward the housing and rotate it 180 degrees until it bounces back. 6. Use the hex head screw to fasten the connecting rod mechanism to the desired position. 7. Insert the swivel bracket into the appropriate hole. 8. Re-install the push-pull flexible shaft and handle bar. Note: When the controller is in neutral, the neutral safety switch is in the closed state. When the controller is in the normal working condition (neutral), the neutral safety switch is in the normally open state...

  • Color: top mount control boat
  • Brand: VEVOR
  • ASIN: B01N8UG6G0
  • UPC: 712166600351
Similar Mount Throttle Control Results
Mount Throttle Control Video Reviews

Universal Top Mount Marine Boat Single Lever Throttle Handle Engine Control BoxControl Box Black

Mount Throttle Control

Cable connected to red pin is the acceleration comes from engine. Cable on the left side is the g...

Tags:

Morse MV Style Throttle Control Service

Mount Throttle Control

How to inspect, and service the Morse MV Ski Boat Control, and properly set up the throttle cable...

Tags: mv control,morse control,morse mv control,ron t...

Quicksilver Commander 4000 Throttle Fix

Mount Throttle Control

In this video I remove the Quicksilver Commander 4000 pistol throttle from my boat, disassemble i...

Tags: mercruiser,4.3l,190hp,carburetor,Quicksilver,Co...

how to install throttle and gear selector cables on a boat

Mount Throttle Control

Installing Outboard Throttle and Gear Selector Cables on a Boat 20 Foot Quick Silver Throttle C...

Tags: yamaha 703 remote control box installation,how ...

BRP OMC Johnson Evinrude Control Box Rebuild and Throttle and Shift Cable replacement V4

Mount Throttle Control

This is the only how-to video on the 80s and 90s OMC control box on YouTube used in Johnson and E...

Tags: BRP,OMC,Johnson,Evinrude,Teleflex,boat,cable,sh...