TotalBoat 5:1 Epoxy Kit (Quart, Fast Hardener)
TotalBoat 5:1 Epoxy Kit (Quart, Fast
TotalBoat 5:1 Epoxy Kits contain the traditional 5:1 marine epoxy resin and hardener valued for its high strength and moisture resistance perfect for completing a variety of boat building projects and boat repairs, whether for wood or fiberglass boats. Kits contain TotalBoat traditional 5:1 Epoxy Resin (compare to West System 105), your choice of TotalBoat 5:1 Fast or Slow Hardener (compare to West System 205 and 206 hardeners), and calibrated 5:1 measuring pumps. The 5:1 epoxy resin and hardener pumps are designed to reduce waste in addition to ensuring you get the exact ratio and a perfect cure every time. Choose TotalBoat 5:1 Fast Hardener to achieve a proper cure while working in cooler temperatures (50-85°F). At 75°F, pot life is 12 minutes. Slow Hardener is best when working in warmer temperatures (70-95 degrees), or if you want to extend working times and cure times. At 75°F, pot life is 20 minutes. For dispensing product via pumps, the recommended temperature is 60-70°F.TotalBoat 5:1 marine epoxy resin can be applied to fiberglass, reinforcement fabrics, wood, etched aluminum, and bare steel. To make a strong adhesive, filleting material, or fairing compound, combine the resin with TotalBoat fillers and thickening agents.Available in 3 sizes: quart, gallon, and 4-gall...
- Brand: TotalBoat
- ASIN: B00HR8515W
- UPC: 811932020994
TotalBoat Penetrating Epoxy (Half-Gallon, Traditional)
TotalBoat Penetrating Epoxy (Half-Gallon,
TotalBoat clear penetrating epoxy seals deeper and cures stronger than leading wood rot repair epoxy solutions. This low-viscosity, no VOC system is ideal for restoring damaged or rotten wood, and sealing new wood from the elements. It works by stopping active rot, gluing and strengthening wood fibers, and sealing porous wood from the inside out. By curing a little slower, TotalBoat Penetrating Epoxy is able to saturate more wood more deeply than 5:1 epoxy resins. Once cured, it is 100% waterproof. Apply with brush, roller, or syringe. Want to saturate the wood even deeper? Add acetone to increase the penetrating and restoration power. Once cured, it may be painted or varnish over after light sanding.Dealing with rotted wood on your boat, home, or other structure? Why replace entire sections of wood when you can restore and strengthen the original wood using this powerful penetrating epoxy sealer. It comes in multiple sizes to aid in wood treatment projects large or small. Larger quantities are perfect for restoring and sealing large or multiple wood surfaces. For smaller wood rot restoration projects, these two-part epoxy kits are available in pints as well.TotalBoat Penetrating Epoxy is available in Traditional and Cold Weather formulas, with very similar characteristics and pe...
- Brand: TotalBoat
- ASIN: B00J36WRSK
- UPC: 811932020734
TotalBoat High Performance Epoxy Kits (Quart, Medium)
TotalBoat High Performance Epoxy Kits (Quart,
TotalBoat High Performance 2:1 Epoxy Kits contain TotalBoat High Performance 2:1 Epoxy Resin and your choice of 2:1 Fast, Medium, or Slow Hardeners for fast wet out and a resilient finish that's noticeably clearer than traditional 5:1 epoxy resin systems-ideal for clear coating applications and hand layups that enhance wood's natural beauty or the interesting woven textures of carbon fiber fabric. The High Performance 2:1 system also cures with slightly better flexibility than traditional 5:1 epoxy resin systems so it's especially suitable for wooden boats that flex during use or with temperature and humidity changes. The three hardener choices let you control working properties and cure times to suit your particular conditions. 2:1 Slow Hardener is best for warmer conditions and has the longest working and cure times. At 77°F, gel time is 40 minutes & full cure is 5 days. 2:1 Medium Hardener is ideal for most common applications. At 77°F, gel time is 25 minutes & full cure is 3.5 days. 2:1 Fast Hardener is for use in cooler conditions and has the fastest cure and shortest pot life. At 77°F, gel time is 10 minutes & full cure is 2 days. The 2:1 Hardeners are also compatible and can be combined with each other to adjust cure times further. Just make sure the final mix is alway...
- Brand: TotalBoat
- ASIN: B06XGPW9XQ
System Three 0102K40 General Purpose Epoxy Kit with #2 Medium Hardener, 1.5 Pints, Medium Amber
System Three 0102K40 General Purpose Epoxy Kit with
System Three General Purpose Epoxy is our original product. It actually gave the company its name. From the founding of the company until just a few years ago it has been the workhorse of the product line. The system formulation, containing one resin and three curing agents or hardeners contains a significant amount of renewable materials. Long before "green” was in vogue the System Three General Purpose Epoxy System contained as much as 30% plant derived materials and has never contained any volatile organic compounds (VOC).It has excellent pot life and cure-time control. When selecting a hardener, consider the minimum temperature expected during application and the desired working time. Combine different General Purpose Epoxy Hardeners to provide a continuous range of cure times. Refer to the product datasheet to make a selection. System Three General Purpose Epoxy works great for wood construction and repair, for gel coat blister repair, and for general fiberglass repair. Use at a simple 2:1 volume ratio with any of the three hardeners. Use at temperatures as low as 35ºF with no limitations on humidity. The medium-low viscosity of System Three General Purpose Epoxy allows for use "as is" for coating and fiberglass work. Combine with different fillers to make adhesive, fille...
- Color: Medium Amber
- Brand: System Three
- ASIN: B003ASE1MM
- UPC: 646697100465
WEST SYSTEM 105A Epoxy Resin (Quart)
WEST SYSTEM 105A Epoxy Resin
The 105 Epoxy Resin is the base material of the WEST SYSTEM family. A clear, pale yellow, low-viscosity resin, 105 forms a high-strength solid with excellent moisture resistance, and is designed specifically for wood fiber, fiberglass, reinforcing fabrics and a variety of metals. The Resin works in conjunction with a variety of WEST SYSTEM Hardeners, Fillers and Pumps for a wide range of applications.
- Color: Clear
- Brand: WEST SYSTEM
- ASIN: B003T0UG98
- UPC: 811343010010
System Three 0900K42 Silvertip Epoxy Kit with Fast Hardener, 1.5 Quarts, Clear
System Three 0900K42 Silvertip Epoxy Kit with Fast
Silver Tip Epoxy is a medium-low viscosity, liquid epoxy resin system that has been optimized for coating and reinforcing fabric saturation in wood-composite boatbuilding. It will outperform any other product in these applications. Silver Tip Epoxy is designed for use with fiberglass, Kevlar, Dynel and graphite as well as on bare wood. It has superior wet-out characteristics with little tendency to foam or trap air. Both the resin and hardener are nearly colorless and are used in an easy 2:1 volumetric ratio. Silver Tip Epoxy cures to a brilliant blush-free film with either the fast or slow hardener eliminating secondary bonding concerns as experienced with other epoxies. The working time is longer than most boat building epoxies without extending cure time. The cured film is tough and resilient with better heat resistance than other epoxies cured at room temperature. Fillers, wood flour, and bulking agents can be combined with Silver Tip Epoxy, however, we suggest using the other members of the Silver Tip Series for adhesive, filleting and fairing applications.
- Color: Clear
- Brand: System Three
- ASIN: B00UVH2CMQ
- UPC: 646697003391
Pro Marine Epoxy Resin and Hardener Kit - 521 System WITH PUMPS | Fiberglass Boat Repair | Fiberglass Cloth and Mat | Total Penetrating Apoxy Glue | Works on Wood, Aluminum, Paint, and Polyester Resin
Pro Marine Epoxy Resin and Hardener Kit -
Our 521 Marine Epoxy Resin can be used with our 521 Fast or Slow Hardener, depending upon your application. 521 Marine Epoxy Resin bonds with fiberglass, metals, wood, and composite fabrics and features superb strength, durability, and moisture resistance. The 521 Epoxy cures to a high-strength solid, suitable for laminating, bonding, fairing, coating, and reinforcing. Pot life ranges from 12 minutes @ 70°F for Fast Hardener, to 30 minutes @ 80°F for Slow Hardener. Cures to a high-strength, moisture-resistant, light amber plastic solid that can be sanded and shaped easily, once cured. Self-leveling properties are ideal for coating and laminating. Viscosity is favored for wetting out fiberglass cloth and other reinforcement fabrics easily. Use this versatile epoxy resin with 521 fast or slow hardener to complete a number of boat building, repair, and restoration projects. Fast Hardener is a perfect selection for applications requiring quick working time and for use in cooler climates (recommended use 60-70°F), the 521 Epoxy Resin/Fast Hardener mixture remains workable to give you adequate time for application, and it speeds up cure time. The recommended temperature for use and dispensing via pump: 60-70°F Pot life @ 70°F: 12 minutes (Fast Hardener) Set time @ 70°F (thin film...
- Brand: Pro Marine Supplies
- ASIN: B07MQ66LFB
MAX MARINE GRADE Epoxy Resin System - 1 Gallon Kit - Wood Sealing, High Strength Fiberglassing Marine Applications, Composite Fabricating Resin
MAX MARINE GRADE Epoxy Resin System - 1
MAX BOND LOW VISCOSITY A/B is a marine grade epoxy system formulated for boat repairs, restoration, and building. It cures to a very tough impact resistant resin system that works well for all types of high strength fabrication of wood, fiberglass, and composites assembly and fabrication. MAX BOND LOW VISCOSITY A/B is an Epoxy/Polyamide based resin that offers the best resin systems for marine environments. It provides excellent resistance to saltwater and retains its physical properties even after prolonged water immersion. It is specially formulated to provide structural strength to a variety of marine and boat building use such as structural fiberglassing, waterproofing, and high strength bonding application. MAX BOND LOW VISCOSITY A/B is a low viscosity formulation of marine grade resin systems providing improved ease of use and faster fiberglass fabric wetting. Upon Cure, marine color paints will bond directly to the cured surface. TYPICAL USE AND APPLICATION Boat Deck Construction Transom Building Fiberglass Boat Hull Construction Fiberglass Reinforcing Wood Sealant And Protective Waterproofing Wood Laminating PHYSICAL AND MECHANICAL PROPERTIES Use TMix Ratio: 1:1 By Weight Or By Volume Mixed Viscosity: 5,624 cPs @ 77°F (25ºC) Working Time: 45 Minutes Tack-Free Time: 4 to...
- Color: Part A - Clear, Part B - Amber
- Brand: The Epoxy Experts, MAX EPOXY SYSTEMS
- ASIN: B01IQ733IY
TotalBoat Polyester Laminating Resin (Quart)
TotalBoat Polyester Laminating Resin
This economical laminating resin is ideal for first or base coat applications. Great for wet-out of fiberglass and other composites when building or fixing boats, surfboards, automotive molds, and other molds. Unlike many other laminating resins, no sanding is required between coats decreasing work and time. TotalBoat Polyester Laminating Resin was engineered without wax in order to enable a tack to hold composites in place, even vertically. MEKP hardener is included for the final coat. Compare to 3M Fiberglass Resin, Evercoat Laminating Resin, System Three Silvertip, Mas Epoxies Flag Epoxy Resin, and West System 105 Epoxy Resin. Quart and gallon sizes available. All TotalBoat products are developed by boaters, for boaters.
- Brand: TotalBoat
- ASIN: B00PZ09ZGU
- UPC: 811932021274
System Three 0600K40 Coat Laminating Resin, 1.5 Pints, Clear
System Three 0600K40 Coat Laminating Resin, 1.5 Pints,
Clear Coat is an extremely low viscosity, water white, "penetrating" epoxy system. Clear Coat cures to a brilliantly clear, very tough finish without the usual "amine blush" associated with some epoxy resin films. Clear Coat contains no volatile solvents. Clear Coat is ideal for clear coating wood, and the wetting out of fiberglass cloth for bright finished boats. Use as a build coat for clear linear polyurethane or Varnish coatings and as a penetrating first coat for blister repair on fiberglass boats. Use also for those applications that require a long pot life and low viscosity. Use Clear Coat as the sole epoxy system to make wood strip canoes and kayaks.
- Color: Clear
- Brand: System Three
- ASIN: B00BR2KNP2
- UPC: 646697130004
Epoxy Laminating Systems
Ideal for working on larger projects, a typical 'fiberglass layup' is a popular process for those...
Epoxy coffee table - olive tree and clear epoxy
Table dimensions: 900mm by 500mm, hight 450mm Top: Clear epoxy and olive tree wood Legs: cherry w...
DIY- How to apply "Liquid Glass" Epoxy Resin on almost any surface.
In this video, I show you detailed step-by-step instructions, how to apply 2 part epoxy, to get a...
Epoxy Tutorial Video
Epoxy resin tutorial video. Show hows to pour epoxy over a wood table or bar top area. UltraClear...
Laminating and Coating Tips using Entropy Resins
Video tutorial of best practices for laminating and coating using Entropy Resins room temperature...