Kett KD-400 18-Gauge Double Cut Shear
Kett KD-400 18-Gauge Double Cut
Replacing the KD-200, these variable-speed, double-cut shears cut C.R. mild steel up to 18-Gauge in straight or contour lines at over 300-Inch per minute, most grades of stainless to 20-Gauge and plastic or Formica up to 3/32-Inch thick.
- Brand: Kett
- ASIN: B006UQ837K
- UPC: 014848524000
Kett KD-440 14 Gauge Double-Cut Shears
Kett Tool KM-442 16 Variable Speed 16 Gauge Double Cut Shear, 6.5 Amp
Kett Tool KM-442 16 Variable Speed 16 Gauge
The KM-442 variable speed, 6.5 amp, double-cut shear easily cuts through 16 gauge C.R. Mild steel and Stainless to 18 gauge. The steel shear head has close cutting heavy duty blades that quickly cut through sheet metal, spiral pipe, metal Doors and metal Studs. Double cutting action provides maximum sheet usage without burring or buckling the Material. At less than 5 pounds this kett shear is both portable for location usage and durable for daily shop operations. (Blade Kit #106).
- Brand: Kett Tool
- ASIN: B01EODAI5U
- UPC: 842724120738
Kett KD-200 18-Gauge Power Shears
Kett KD-441 24-Gauge Variable-Speed Scissor Shears
Kett KD-441 24-Gauge Variable-Speed Scissor
With a powerful 5 amp motor and speeds up to 2500 strokes per minute, the KD-441 quickly cuts through plastics, wire mesh and rubber with a clean scissors action. When cutting thin coated metals, the swiping cut seals edges and is less likely to rust or corrode. Set the speed of these shears to suit your work.
- Brand: Kett
- ASIN: B003ZDOPPA
- UPC: 014848524413
Replacement Blade for 18-gauge Shear Cutter for Kett KIT102 and Dewalt DW890/DW891 91970-00(C), 91969-00(L), 91967-00(R), Milwaukee, Makita, Sioux, Porter Cable Shear Blades
Replacement Blade for 18-gauge Shear Cutter for Kett
Replacement 3 Blade for 18-gauge Shear Cutter for Kett KIT102 and Dewalt DW890/DW891 91970-00(C), 91969-00(L), 91967-00(R) Shear Blades Specifications: Material: Cr5MOV1 Hardness: 58-63 Rockwell Name: 18 Gauge Shear Blade Dimension: Fixed: 3-7/16 in.; Movable: 3-3/4 in. Cutting Capacity: steel: 18 gauge; stainless: 20 gauge 18 Gauge Blade Kit Includes: Right And Left Fixed Blades, Moveable Blade, And One Bushing Application: Milwaukee, Dewalt, Kett, Makita and similar electrical shears This Part is Compatible with: Dewalt: DC490B, DC490KA, DC490P, DW890, DW891, DW891-220, DW940K-2, DW941K-2 Milwaukee: 6850-2, 6850, 6850-4, 6852-20, 2635-20, 2635-22, 2635-80, 2635-82 KETT :KD-400, K-100, K-200, KD-200, P-500, P-2060, 003ebh, B-100, P-300,P-1060 B&D: KB-301, 3207, 3208, 3208-220 Makita:JS1300, JS1670, JS1600, JS3200, BJS130, BJS130z Sioux:1446HPL1, SSH10P18, 1446ES, SSH10S18, 1446 Ingersoll Rand:7812G Dotco:14CFS93-98, 14CFS93-99 Porter Cable:6603, 6602
- Brand: JTEX
- ASIN: B07FK2JG3F
- UPC: 703931966642
Kett Tool KM-440 14 Gauge Double Cut Shear, 6.5 Amp Double Insulated Motor, Cuts 150" per Minute
Kett Tool KM-440 14 Gauge Double Cut Shear,
This lightweight, variable-speed pistol-grip shear cuts 14 gauge C.R. Mild steel and most grades of Stainless to 16 gauge. Double-insulated, the 6.5 amp KM-440 cuts at over 150 inches per minute, leaving a clean, flat sheet, ready to fabricate. Distortions are absorbed in an easily disposed of waste curl, leaving the sheet cool and free of burn, chips and burrs. The cutting blades are finest high-speed steel, which you can easily replace. (See Kit #106).
- Brand: Kett Tool
- ASIN: B01EODAI1E
- UPC: 842724120790
Kett KD-480 Scissor Shear
Kett KD-480 Scissor
The variable-speed KD-480 features a stationary bottom blade. They are ideal for cutting a wide range of pliable materials such as: carpet, carpet underlayment, foam rubber, linoleum, vinyl, woven wood fabric, chip board, etc. The unique scissors action cuts light materials without fouling or gouging. Even handles heavy foil, light insulated wire, hardware cloth and mesh screening with ease. The large -Inch Rabbit Ear-Inch blades funnel thick, soft materials into the scissor jaws for a clean, flowing cut. This time and labor saving cutting shear weighs less than five-Pound. The cutting blades are the finest A-2 tool steel, and can easily be replaced.
- Brand: Kett
- ASIN: B009OGHZU4
- UPC: 014848524802
- Kett Cutting Shears Blade Kit
Kett 106 3pc 14/16 Gauge Shear Blade Kit Genuine 2x 2-Pack
Kett KM-400 18-Gauge Double Cut Shear
Kett KM-400 18-Gauge Double Cut
These variable-speed double-cut shears feed quickly and quietly, without warping or bending your finished piece (distortion is in the waste strip). It easily follows a scribed line. The materials edges are not hardened or burred, so you get maximum use of a sheet. The swiping action of blades seals the edge of coated metals. These powerful 6.5-AMP shears cut C.R. mild steel up to 18-Gauge in straight or contour lines at over 300-Inch per minute, most grades of stainless and plastic or Formica up to 3/32-Inch thick.
- Brand: Kett
- ASIN: B009OGI3CS
- UPC: 014848614008
Kett 60-23 18ga. alum. shear head
Kett Tool KIT #102 Intermediate 18 Gauge Shear Blade Replacement Kit
Makita JN1601 5 Amp 16 Gauge Nibbler
Makita JN1601 5 Amp 16 Gauge
This Makita nibbler features a 360-degree rotating die, large 1/4in. stroke, sliding switch for continuous use, built-in thickness gauge and easy punch and die replacement. Includes wrench and hex wrench. Cordless: No, Cutting Capacity Mild Steel (gauge): 16, Cutting Capacity Stainless Steel (gauge): 18, Cutting Depth (in.): 1/4, Volts: 115, Inside Cutting Radius (in.): 1 3/4, Strokes Per Minute (SPM): 2,200, Cutting Capacity Aluminum (gauge): 10, Amps: 5, Outside Cutting Radius (in.): 2.
- Color: Blue
- Brand: Makita
- ASIN: B000TKRLS0
- UPC: 088381015448
Genesis GES40 4.0 Amp Corded Swivel Head Variable Speed Electric Power Metal Shear
Genesis GES40 4.0 Amp Corded Swivel Head Variable
The Genesis GES40 swivel head electric metal sheer tool cuts through various metals with ease with a 4.0 amp motor. - 4.0 Amp Motor-360° Swivel Head for cutting curves in sheet metal-Quickly cuts metal roofing, flashing, and other sheet metal up to 14 gauge-Three blades work to reduce metal deformation-Cut 14 Gauge aluminum, 20 gauge stainless steel, or 18 gauge Steel Genesis' two year warranty means you buy with confidence.
- Brand: Genesis
- ASIN: B01LZ7HCRC
- UPC: 811285020665
WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear
WEN 3650 4.0-Amp Corded Variable Speed Swivel Head
Remember when you could cut through metal? Glide through 20 gauge stainless steel or 18 gauge sheet metal with the WEN Variable Speed Electric Metal Shear. The lightweight 4.7-pound design limits fatigue during operation while the powerful 4-amp motor makes easy work out of a variety of metals. The pressure sensitive switch adjusts the speeds of the cut anywhere from 0 to 2500 strokes per minute depending on the force applied. The pivoting head rotates a full 360 degrees to allow for cutting at any angle or direction without having to have an awkward or uncomfortable hold on the shear’s handle. And, because it’s a WEN Product, your purchase comes backed by a two-year warranty, a nationwide network of skilled service technicians and a friendly customer phone line all to make sure you remember WEN.
- Brand: WEN
- ASIN: B01M5G99E7
- UPC: 044459036500
Wiss W20 10-3/8-Inch Inlaid Heavy Duty Industrial Shears
Kett 60-21 60-22 Shear Blade Kit for 18 gauge
Kett 40-20 14 Gauge Steel Shear Head Unit (for models KD-440, P-540, P-1040, E-140 and KC-140)
Electrician Scissors for Home Theater, Datacom, Telecom, Cuts, Crimps, Strips, Nickel Plated Klein Tools 2100-7
Electrician Scissors for Home Theater, Datacom, Telecom, Cuts,
These Klein Tools Electrician's Scissors with stripping notches are made for telecom and electrical applications. They cut wire, cable and cordage including electrical communication 19 AWG and 23 AWG wire. The upper blade features wire stripping notches. The serrated lower blade allows for non-slip cutting action. Upper blade has stripping notches for 19 AWG and 23 AWG wire. Strong, tough tempered steel construction. Nickel-plated finish resist corrosion. Serrated teeth allow for non-slip cutting action. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.
- Color: Multi
- Brand: Klein Tools
- ASIN: B000VL03NC
- UPC: 733391958949
MA72500 Klenk K12 Straight Cut Laminate Shear
MA72500 Klenk K12 Straight Cut Laminate
Klenk Laminate Shears cut high-pressure laminates such as Wilsonart and Formica without chipping or binding. These tools do not cut steel. They are designed for the kitchen and bath, or cabinet and countertop trade. They will not mar the surface of the laminate.
- Brand: Klenk Tools
- ASIN: B000QFPD4W
- UPC: 095412101506
6-1/4 inch Carbon Steel Shears - Kevlar, Dyneema, Vectran, Spectra, Technora, Nomex, Innegra, Dacron, Fiberglass, Carbon Fiber, Breathers Fiber Cable
6-1/4 inch Carbon Steel Shears - Kevlar, Dyneema,
These shears are ideal to cut materials made from aramid and para-aramid fibers such as Kevlar®, Dyneema®, Vectran®, Spectra®, Technora®, Nomex®, Innegra®, Dacron and other materials made from fiberglass and carbon fiber in rope, ribbon, thread, tape and fabric form. Its blades are made of high carbon alloy steel from Japan and are infused with Molybdenum and Vanadium (HRC 60~62) through a proprietary manufacturing process to achieve a level of hardness (HV1200) to cut high tech material. It can be used to cut materials made from carbon fiber, glass fiber, plastic, canvas, vinyl, leather, suede, leatherette, nylon, silk, cotton, for upholstery, headliner, cloth, string or other knitted forms. The cutting performance is great across the length of the blade. Quick and accurate trimming can be done with sharp edges. They can also be used to make relief cuts during the lay-up process to fit the reinforcement into the mold. Cut hanging fibers along the cutting edge of the fabric cleanly. Cut fiber thread off the fiber optic cable neatly to install connectors. Also used for splicing all type of halyards, sheets, topping lifts, lazyjacks and control lines.
- Color: Black
- Brand: Ascend Tools
- ASIN: B017PUY1SE
- UPC: 722589163203
Kett 40-24 Eccentric Bearing Assembly
Superior Steel SB140 Replacement Blade for 14 and 16 gauge Shear Cutter replaces Kett KIT106
Superior Steel SB140 Replacement Blade for 14 and
Superior Steel SB140 Replacement Blade for 14 and 16 gauge electric Shear Cutter. Replaces: Kett KIT106. Kit Includes: Kett 40-21(C), Kett 60-22(L) Kett 60-22(R). DeWalt 448696-00(C), Dewalt 91969-00(L), Dewalt 91967-00(R) - Compatible with - Black and Decker: 3208 Type 100 | DeWalt: DW891, DW3208 | Kett: KM-440, KD-440, KL-240
- Brand: Superior Steel
- ASIN: B00NY6GJCU
- UPC: 099461747296
KETT KD-200 Double-Cut Power Shear
This video is from the full review at http://www.newmetalworker.com/Reviews/kettkd200rvu.html Th...
Kett Scissor Shears KD-480
https://www.ohiopowertool.com/p-4024-kett-scissor-shears-kd-480.aspx The Kett KD-480 Scissor Shea...
KD-440 KETT Tool 14 gauge heavy-duty double cut shears
KD-440 KETT Tool 14 gauge heavy-duty double cut shears
Kett KD-200 Metal Cutting Shears - Ohio Power Tool
Kett KD-200 double-cut shear in action, cutting 18 gauge mild steel.
Kett 18 Gauge Profile Shear
https://www.ohiopowertool.com/m-165-kett-shears.aspx The Kett KD-446R are a lightweight and easil...