ZRM&E 20pcs TCRT5000 Photoelectric Sensors Infrared Reflective Optical Sensor for Smart Car IR Photoelectric Switch

ZRM&E 20pcs TCRT5000 Photoelectric Sensors Infrared Reflective Optical

Name: Photoelectric Sensor Type: Infrared Reflective Model: TCRT5000 TCRT5000 has an infrared transmitting tube and an infrared receiving tube. When the infrared signal of the transmitting tube is received by the receiving tube after reflection, the resistance of the receiving tube will change, generally reflected in the form of voltage changes in the circuit, and obtain the processed output results after ADC conversion or LM324 and other circuit shaping. The variation of resistance depends on the intensity of infrared signal received by the receiver, often reflected in two ways: the color of the reflective surface, and the distance between reflective surface and receiver tube. Package Included: 20pcs TCRT5000 Photoelectric Sensors

  • Brand: ZRM&E
  • ASIN: B07P8LMS6R
  • UPC: 732661158751

DAOKI 5PCS TCRT5000 Infrared Reflective Sensor Module IR Barrier Line Track Photoelectric Switch

DAOKI 5PCS TCRT5000 Infrared Reflective Sensor Module IR

Introduce:TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.Feature:1. Using infrared reflective sensor TCRT50002. The detection distance: 1mm ~ 8mm apply focal distance of 2.5mm3. The comparator output signal clean, good waveform, driving ability, more than 15mA.4. With a multi-turn precision potentiometer adjustable sensitivity adjustment5. The working voltage of 3.3V-5V6. The output format: digital switching outputs (0 and 1)7. A fixed bolt holes for easy installation8. A small PCB board size: 3.2cm x 1.4cm9. Using a wide voltage LM393 comparatorUses:1. Meter pulse data sampling2. Fax paper shredders detection3. Obstacle detection4. Black and white line detectionPackage included:100% Brand New5x IR Barrier Line Track Sensor

  • Brand: DAOKI
  • ASIN: B00XT0PBC0
  • UPC: 695259096913

CHENBO 6pcs TCRT5000 Infrared Reflective IR Photoelectric Switch Barrier Line Track Sensor Module for Arduino Smart Car w/Cable 3.3V-5V

CHENBO 6pcs TCRT5000 Infrared Reflective IR Photoelectric Switch

TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit. Feather Using infrared reflection sensors TCRT5000 Test reflection distance: 1mm to 25mm Clean and 3, the comparator output, signal waveform, driving ability is strong, for more than 15 ma. With many adjustable precision potentiometer to adjust sensitivity The working voltage of 3.3V to 5V Output form: digital switch output (0 and 1) Has a fixed bolt hole, convenient installation Small board PCB size: 3.2cm x 1.4cm The LM393, use of wide voltage comparator Size:3.1x1.3cm(approx) Use for: The electricity meter pulse data sampling; Fax machine, shredder paper detection; Obstacle detection; Black and white line detection. Package:6*Tracking Sensor module;1*24pcs 20cm male to male jumper cable.

  • Brand: CHENBO
  • ASIN: B07F1R2DJ3

Seco-Larm E-931-S35RRQ Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam Sensor with 35 Foot Range

Seco-Larm E-931-S35RRQ Enforcer Indoor/Outdoor Wall Mounted Photoelectric Beam

Seco-Larm E-931-S35RRQ NIR Reflective Photoelectric Sensor; For outdoors gates, garage doors, etc; Weatherproof (IP66) construction for indoor/outdoor usage; Adjustable sensing distance SECO-LARM E-931-S35RRQ NIR Reflective Photoelectric Sensor; For outdoors gates, garage doors, etc; Weatherproof (IP66) construction for indoor/outdoor usage; Dark ON operation; Adjustable sensing distance; Compact size Key Features For outdoors gates, garage doors, etc Weatherproof (IP66) construction for indoor/outdoor usage Dark ON operation Adjustable sensing distance Compact size 12~240VDC / 24~240VAC Operation Current: Up to [email protected] Bracket and mountinghardware Included Pre-wired 6ft (1.8m) cord New single-gang box and wall-mount brackets available Specifications Sensing Range: 0.5' to 35' (0.1 - 11m) Current Draw: Standby- [email protected]; [email protected], Active- [email protected]; [email protected] Operating Voltage: 12~240VDC or 24~240VAC Response Time: 10ms (Max) Light Source: IR LED LEDs - Red: Active LEDs - Yellow: Standby Output: SPDT Relay Output Switching Capacity: 250VAC/1A, 30VDC/2A Enclosure: IP66 Waterproof Operating Temperature: -4º~131ºF (-20º~55ºC)

  • Color: 35' Standard
  • Brand: Seco-Larm
  • ASIN: B001LFPB0M
  • UPC: 676544000495

LGDehome TCRT5000 Infrared Signal Reflective Track Sensor (3.3V-5V),IR Photoelectric Switch Barrier Line Indicator Module for Robot Arm Arduino Smart Car Robotic Kit (Pack of 10)

LGDehome TCRT5000 Infrared Signal Reflective Track Sensor (3.3V-5V),IR

Introduction: When the Indicator diode is lighted: That mean the target is beyonded the range of the detection.and the The infrared light can be reflected back ,the intensity is power enough, the infrared receiving tube is saturated, and the output of the module is Low level. However the Indicator diode is off: Which mean the infrared light can not be reflected back ,the intensity isn't power enough.The infrared receiving tube is in the off , at the same time, the output of the module is high level. Specification: 2.Working voltage 3.3V-5V 3.Detection of reflection distance: 1mm ~ 25mm 4.The comparator output, the signal is clean, the waveform is good, the driving ability is strong, more than 15mA 5.Output form: digital switch output (0 and 1) 6.Using a wide voltage LM393 comparator 7.With fixed bolt holes for easy installation 8.With potentiometer adjustment sensitivity 9.Using TCRT5000 infrared reflection sensor Package Included: 10pcs TCRT5000 Infrared Reflective IR Sensor Module

  • Brand: LGDehome
  • ASIN: B07LD3TGRT
  • UPC: 653334208576

XLX 50 PCS TCRT5000L TCRT5000 Photoelectric Sensors Reflective Optical Sensor with Transistor Output Infrared 950mm 5V 3A For Tracking and Obstacle Avoidance Car

XLX 50 PCS TCRT5000L TCRT5000 Photoelectric Sensors Reflective

Compact construction, sense the presence of an object by using the reflective IR beam from the object. Consists of a phototransistor. Snap-in construction for PCB mounting. Plastic polycarbonate housing construction which prevents crosstalk. Position sensor for shaft encoder. Detection of reflective materials such as paper, IBM cards, magnetic tapes, etc. Limit switch foe mechanical motions in VCR. General purpose - wherever the space is limited. Specifications: Sensing Distance: 12mm. Operating Wavelength: 950 mm. Sensing Method: Reflective. Reverse Voltage: 5V. Forward Current: 60mA. Forward Surge Current: 3A. Emitter Power Dissipation: 100mW. Collector Emitter Voltage: 70V . Emitter Collector Voltage: 5V. Collector Current: 100mA. Detector Power Dissipation: 100mW. Sensor Total Power Dissipation: 200mW. Operating Temperature: -25℃ ~ +85℃. Package Included: 50PCS TCRT5000L

  • Brand: XLX
  • ASIN: B01N2HVRQP
  • UPC: 714973094712

OSOYOO 10PCS TCRT5000 Infrared Reflective IR Photoelectric Switch Barrier Line Track Sensor Module for Arduino Smart Car Robot with 5 8Pin Female to Female Jumper Wires

OSOYOO 10PCS TCRT5000 Infrared Reflective IR Photoelectric Switch

Specification: Tracking Sensor module is designed with reflected Infrared sensor, indicator light. Built in a potentiometer for sensitivity control Product model : TCRT5000; working Voltage : DC 3. 3-5V Output channel : 0/1; detect distance : 1-25mm; focal distance : 2. 5mm Chipset : LM393; PCB Size : 32 x 14mm/1. 3" x 0. 55" (low) material : electric part Total Size : 38 x 14 x 18mm/1. 5" x 0. 55" x 0. 7"(L*w*h); Net weight : 3g; Package includes: 10PCS Tracking Sensor module 5PCS 8Pin female to female jumper wires

  • Brand: OSOYOO
  • ASIN: B07C69N65P

Zerama 10pcs TCRT5000L TCRT5000 Reflective Optical Sensor Infrared IR Photoelectric Switch

Zerama 10pcs TCRT5000L TCRT5000 Reflective Optical Sensor Infrared

Description:Compact construction, sense the presence of an object by using the reflective IR beam from the object.Consist of a phototransistor.Snap-in construction for PCB mounting.Plastic polycarbonate housing construction which prevents crosstalk.Specifications:Sensing Distance: 12mm.Operating Wavelength: 950 mm.Package Height: 7 mm.Sensing Method: Reflective.Reverse Voltage: 5V.Forward Current: 60mA.Forward Surge Current: 3A.Emitter Power Dissipation: 100mW.Collector Emitter Voltage: 70V.Emitter Collector Voltage: 5V.Collector Current: 100mA.Detector Power Dissipation: 100mW.Sensor Total Power Dissipation: 200mW.Operating Temperature: -25°C ~ +85°C.Package including:10pcs * TCRT5000L Reflective Optical Sensor.Package Including.

  • Brand: Zerama
  • ASIN: B07RKL9HD6
  • UPC: 756222524557

Seco-Larm E-931-S50RRGQ Enforcer IR Reflective Photoelectric Beam Sensor, 50 ft.

Seco-Larm E-931-S50RRGQ Enforcer IR Reflective Photoelectric Beam Sensor,

Monitor your garage, gate, driveway or doorway with the Seco-Larm Enforcer Photoelectric Beam Sensor (50 ft.). This weatherproof sensor triggers an alarm in a connected security system when its infrared (IR) beam is broken. The 3-inch round reflector can be installed discretely on a wall or other flat surface. It provides a large sensing area for wide entryways, as well as easier alignment during installation. This sensor also features lensed optics and dual-color LEDs to strengthen the beam and minimize false alarms due to rain, snow, falling leaves, birds, etc. FEATURES: Up to 50-foot sensing range (sensor to reflector). Suitable for indoor or outdoor use. Weatherproof with sunlight-filtering case. Near immediate response time from 10ms. Includes installation hardware. SPECIFICATIONS: Type: Reflective photoelectric beam sensor. Sensing Range: Up to 50 feet (15m). Operating Voltage: 12~30DC/ADC, 100mA. Current Draw: Standby: 55mA at 12VDC Active: 40mA at 12VDC. Response Time: 10ms. Light Source: IR LED. LEDs: Solid Red: No beam signal, triggered. Alternating Flash: Poor beam signal. Solid Green: Good beam signal, properly aligned. Alarm Output: NO/NC relay, 0.5A at 120VAC, min. 1s. Tamper Switch: NC switch, 500mA at 30VAC/VDC. Alignment Angle: Horizontal: +/-90 degrees; Vertical...

  • Brand: Seco-Larm
  • ASIN: B06XPTVXFS
  • UPC: 676544017318

Gikfun Obstacle avoidance IR Infrared Sensor Module Reflective Photoelectric Light Intensity DIY Kit for Arduino UNO (Pack of 5pcs) EK1254x5

Gikfun Obstacle avoidance IR Infrared Sensor Module Reflective

Smart car Obstacle avoidance Infrared Sensor module Reflective photoelectricPackage content: 5 x IR Infrared Sensor Module

  • Brand: Gikfun
  • ASIN: B07FJLMLVZ

1PCS TCRT5000 Reflective IR Photoelectric Switch Barrier Line Track Sensor Module Blue

1PCS TCRT5000 Reflective IR Photoelectric Switch Barrier Line

Output:Switching TransducerType:BiosensorMaterial:PolymerModel Number:TCRT5000 Infrared SensorUsage:Temperature SensorTheory:Hall Sensoris_customized:YesUnit Type:piecePackage Weight:0.002kg (0.00lb.)Package Size:1cm x 1cm x 1cm (0.39in x 0.39in x 0.39in)

  • Brand: wrdxc
  • ASIN: B07SLY9VC4

Willwin 5pcs TCRT5000 Infrared Reflective Sensor Module IR Barrier Line Track Photoelectric Switch

Willwin 5pcs TCRT5000 Infrared Reflective Sensor Module IR

Introduce: TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.Feature:1. Using infrared reflective sensor TCRT50002. The detection distance: 1mm ~ 8mm apply focal distance of 2.5mm3. The comparator output signal clean, good waveform, driving ability, more than 15mA.4. With a multi-turn precision potentiometer adjustable sensitivity adjustment5. The working voltage of 3.3V-5V6. The output format: digital switching outputs (0 and 1)7. A fixed bolt holes for easy installation8. A small PCB board size: 3.2cm x 1.4cm9. Using a wide voltage LM393 comparatorUses:1. Meter pulse data sampling2. Fax paper shredders detection3. Obstacle detection4. Black and white line detection Package included:100% Brand New5 x IR Barrier Line Track Sensor

  • Brand: Willwin
  • ASIN: B0784L5YTY
  • UPC: 765470382802

Diymore 10pcs TCRT5000 3-pin IR Infrared Line Track Follower Sensor Obstacle Avoidance Module

Diymore 10pcs TCRT5000 3-pin IR Infrared Line Track

Specification: Size: 3.5x 1cm Work Power : 5V DC Detector distance:10MM Build-in TCRT5000 sensor NSOR Applicable to a variety of platforms including arduino / AVR / ARM /PIC Package Included: 10 x IR Infrared Line Track Follower Sensor TCRT5000 Obstacle Avoidance

  • Color: Black
  • Brand: diymore
  • ASIN: B01MSYIZGH
  • UPC: 707427338517

Taiss/Indoor Wall Mounted Photoelectric Beam Sensor E3JK-R4M1 12-240VDC 24-240VAC Retroreflective photoelectric Sensor Switch Proximity Switch 2M Cable Induction 4M

Taiss/Indoor Wall Mounted Photoelectric Beam Sensor E3JK-R4M1 12-240VDC

Welcome to our Store The products we sell are cheap and beautiful?There are a large number of customers trial?Our photos are taken in kind, do not do any Landscaping. The company's business philosophy: China's very cheap high-quality products sold all over the world, we also sell only high-quality products?"Service first, quality first" principle.

  • Brand: Taiss
  • ASIN: B073WV4JCX
  • UPC: 710280018748

DZS Elec 5PCS TCRT5000 Infrared Reflective Switch IR Barrier Line Track Sensor Module and 20Pin 20cm Cables Line Jumper Female to Female Kit for Arduino Raspberry Pi Smart Car Robot

DZS Elec 5PCS TCRT5000 Infrared Reflective Switch IR

Features: Infrared Reflection Sensor Model:TCRT5000. Detection Distance: 1mm to 8mm. Focus Distance :2.5mm. Output Current: greater than 15mA. Operating Voltage: 3.3V-5V. Output form: digital switching output (0 and 1). Small board PCB size: 32 x 14mm/1.26x0.55Inches. Comparator Model: LM393. Length of Dupont Wire:20cm/7.87Inches. Package:6PCS Tracking Sensor Module,1PC 20 Pin Dupont Wire. Description: The infrared emitting diode of the TCRT5000 sensor continuously emits infrared ray. When the emitted infrared ray is not reflected back or is reflected back but not strong enough, the photosensitive triode is always in the off state. At this time, the output end of the module is at a low level, indicating that the diode is always in the out state.When the detected object appears within the detection range, the infrared ray is reflected back and the intensity is large enough, and the photosensitive transistor is saturated. At this time, the output end of the module is at a high level, indicating that the diode is lit.

  • Brand: DZS Elec
  • ASIN: B07S612KT1
  • UPC: 737504623007

RHX 10 Pcs TCRT5000L TCRT5000 Reflective Optical Sensor Infrared 950mm 5V 3A New

RHX 10 Pcs TCRT5000L TCRT5000 Reflective Optical Sensor

Plastic polycarbonate housing construction which prevents crosstalk. Limit switch foe mechanical motions in VCR. General purpose - wherever the space is limited. Sensing Distance: 12mm. Operating Wavelength: 950 mm. Sensing Method: Reflective. Reverse Voltage: 5V. Forward Current: 60mA. Forward Surge Current: 3A. Emitter Power Dissipation: 100mW. Collector Emitter Voltage: 70V . Emitter Collector Voltage: 5V. Collector Current: 100mA. Detector Power Dissipation: 100mW. Sensor Total Power Dissipation: 200mW. Operating Temperature: -25¡ãC ~ +85¡ãC. Package Included: 10 x TCRT5000L

  • Brand: RHX
  • ASIN: B00C0P98C4
  • UPC: 700371802486

IR Reflective Sensor 1-4mm

IR Reflective Sensor

The 1146_0 IR Reflective Sensor uses an infra-red LED and a phototransistor to measure the distance of an object between 1mm and 4mm away. This sensor can also detect the presence of an object up to 9mm away, but it won't be able to reliably measure the distance. This sensor works best with objects with smooth, opaque surfaces. Because of this, you can also use it to differentiate between a reflective object and a non-reflective object at the same distance.Product SpecificationsSensor PropertiesSensor Type - Distance (Infrared)Sensor Output Type - RatiometricMeasurement Distance Min - 1.5 mmMeasurement Distance Max - 4 mmDetecting Distance Min - 200 ?mDetecting Distance Max - 9 mmElectrical PropertiesSupply Voltage Min - 4.8 V DCSupply Voltage Max - 5.3 V DCCurrent Consumption Max - 50 mAPhysical PropertiesOperating Temperature Min - -40 °COperating Temperature Max - 85 °C

  • Brand: Phidgets
  • ASIN: B00JZTHDO8

Adafruit Accessories Reflective Ir Sensor With 470 And 10K Resistors

Adafruit Accessories Reflective Ir Sensor With 470 And

This Reflective IR Sensor is a simple plastic casing with two elements - an IR LED and an IR phototransistor. You can control the IR LED and turn it on to bounce IR off objects to determine their reflectivity. White & light colored stuff will bounce the light, so you can detect it. Black & dark colored stuff will absorb the IR light so that it isn't detected. Likewise, if something isn't in the way of the sensor, it won't trigger either. These sensors are handy when you want to detect if something has passed by the sensor, or a very simple hand-detector. Also sometimes these are used as rotary encoder, if the encoder wheel has black and white stripes, the photo sensor is fast enough to tell you the RPM. Comes with a 470 ohm resistor (for biasing the IR LED) and a 10K resistor which you can use as a pull-up resistor for the phototransistor. The sensor is breadboard friendly and easy to solder to. This works best when detecting a light-colored object approximately 5mm away - 2mm to 10mm worked fairly well but your results may vary with the LED brightness, object shininess, etc.

  • ASIN: B01BQUQKO2

HONG111 IR Infrared Obstacle Avoidance Sensor Module for Arduino Smart Car Robot, Infrared Tube Module, Photoelectric Reflection Sensor (10 Pack)

HONG111 IR Infrared Obstacle Avoidance Sensor Module for

Specification: Board size: 3.2cm*1.4cm Power supply: DC 3-5V Detection distance: 2~30cm Detection angle: 35° Comparators using LM393, stable operation With 3mm screw holes for easy fixing and installation Application: Widely used in robots to avoid obstacles, obstacle avoidance cars, assembly line counting and black and white line tracking, etc. Package Included: 10 x Infrared Obstacle Avoidance Module Module interface description 1 - VCC external 3.3V-5V voltage (can be directly connected to 5v microcontroller and 3.3v microcontroller) 2 - GND External GND 3 - OUT small board digital output interface (0 and 1) Features: ☞Low interference, easy assembly, easy to use. ☞The detection distance can be adjusted by the potentiometer, the potentiometer is adjusted clockwise, the detection distance is increased, the potentiometer is adjusted counterclockwise, and the detection distance is reduced. ☞The sensor actively detects infrared reflections, so the reflectivity and shape of the target are the key to detecting the distance. Among them, the black detection distance is the smallest and the white is the largest, the small area object has a small distance and the large area distance is large. ☞The sensor module output port OUT can be directly connected to the MCU IO port, or ...

  • Brand: HONG111
  • ASIN: B06XKN15TT

8pcs TCRT5000 Infrared Reflective Sensor IR Photoelectric Switch Barrier Line Track Sensor Track Module w/Cable for Arduino Smart Car Robot 3.3V-5V

8pcs TCRT5000 Infrared Reflective Sensor IR Photoelectric Switch

TCRT5000 sensor of infrared emission diode constantly launch infrared, the infrared ray is emitted when the intensity of reflected back has not been reflected or but is not big enough, the light activated triode has been in the off state, the output end of the module at this time for the high level, indicating diode has been put out state; Detected objects appear within the scope of testing, infrared light is reflected back and strength is enough big, light activated triode saturation, at this time the output of the module for the low level, instructs the diode lights. Module Features: 1, using infrared reflective sensor TCRT5000 2, detecting the reflected distance: 1mm ~ 25mm applicable 3, the comparator output signal clean, good waveform driving ability more than 15mA. 4, with multi-turn precision potentiometer adjustable sensitivity adjustment 5, the working voltage of 3.3V-5V 6, the output format: digital switching output (0 and 1) 7, a fixed bolt holes for easy installation 8, using a wide voltage LM393 comparator Package included 8*TCRT5000 tracking sensor 1*40pcs 20cm male to male cable

  • Brand: R REIFENG
  • ASIN: B07QCN1BLK

10Pcs TCRT5000 Infrared Reflective IR Switch Sensor Board Barrier Line Tracking Module 4Pin 3.3-5V for Arduino Smart Car

10Pcs TCRT5000 Infrared Reflective IR Switch Sensor Board

TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.Features:1. Using infrared reflective sensor TCRT50002. The detection distance: 1mm ~ 8mm apply focal distance of 2.5mm3. The comparator output signal clean, good waveform, driving ability, more than 15mA4. With a multi-turn precision potentiometer adjustable sensitivity adjustment5. The working voltage of 3.3V-5V6. The output format: digital switching outputs (0 and 1)7. A fixed bolt holes for easy installation8. A small PCB board size: 3.2cm x 1.4cm9. Using a wide voltage LM393 comparator Functions:1. Meter pulse data sampling2. Fax paper shredders detection3. Obstacle detection4. Black and white line detection Package Included: 10Pcs×TCRT5000 IR Infrared Line Track Sensor Module

  • Brand: ModuleFly
  • ASIN: B07P9C23B9

2Pcs TCRT5000 Infrared Reflective IR Switch Sensor Board Barrier Line Tracking Module 4Pin 3.3-5V for Arduino Smart Car

2Pcs TCRT5000 Infrared Reflective IR Switch Sensor Board

TCRT5000 infrared sensor emits infrared emitting diode continuously when no infrared rays emitted or reflected back is reflected back but the strength is not large enough, the phototransistor has been in the off state, and the output terminal of the module is high, indicating that the diode has been in the off state; in the object to be detected within the detection range, and the intensity of the reflected infrared rays is large enough, phototransistor saturated, and the output terminal of the module is low, the indicator LED is lit.Features:1. Using infrared reflective sensor TCRT50002. The detection distance: 1mm ~ 8mm apply focal distance of 2.5mm3. The comparator output signal clean, good waveform, driving ability, more than 15mA4. With a multi-turn precision potentiometer adjustable sensitivity adjustment5. The working voltage of 3.3V-5V6. The output format: digital switching outputs (0 and 1)7. A fixed bolt holes for easy installation8. A small PCB board size: 3.2cm x 1.4cm9. Using a wide voltage LM393 comparator Functions:1. Meter pulse data sampling2. Fax paper shredders detection3. Obstacle detection4. Black and white line detection Package Included: 2Pcs×TCRT5000 IR Infrared Line Track Sensor Module

  • Brand: ModuleFly
  • ASIN: B07P8B3YB4

TOUHIA TCRT5000 Photoelectric Sensors Reflective Optical Sensor with Transistor Output Infrared 5V 3A For Tracking and Obstacle Avoidance Car(40PCS)

TOUHIA TCRT5000 Photoelectric Sensors Reflective Optical Sensor with

Specification: - Limit switch foe mechanical motions in VCR - General purpose - wherever the space is limited - Specifications: Sensing Distance: 12mm. Operating - Wavelength: 950 mm;Sensing Method: Reflective - Reverse Voltage: 5V;Forward Current: 60mA - Forward Surge Current: 3A;Emitter Power Dissipation: 100mW - Collector Emitter Voltage: 70V ;Emitter Collector Voltage: 5V - Collector Current: 100mA;Detector Power Dissipation: 100mW - Sensor Total Power Dissipation: 200mW;Operating Temperature: -25℃ ~ +85℃ Features: 1.Detection of reflective materials such as paper, IBM cards, magnetic tapes, etc 2.Plastic polycarbonate housing construction which prevents crosstalk. Position sensor for shaft encoder 3.Compact construction, sense the presence of an object by using the reflective IR beam from the object Package Included:40PCS TCRT5000L

  • Brand: TOUHIA
  • ASIN: B07S21ZNQG
  • UPC: 778739185250

DC 3.3V 5V QRE1113 Digital Linear Sensor IR LED Infrared Reflective Sensor Module Capacitor Discharge Circuit Breakout Board

DC 3.3V 5V QRE1113 Digital Linear Sensor IR

This version of the QRE1113 breakout board features a digital output, using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available, and can be used in both 3.3V and 5V systems.The board’s QRE1113 IR reflectance sensor is comprised of two parts - an IR emitting LED and an IR sensitive phototransistor. When you apply power to the VCC and GND pins the IR LED inside the sensor will illuminate. A 100Ω resistor is on-board and placed in series with the LED to limit current. The output of the phototransistor is tied to a 10nF capacitor. The faster that capacitor discharges, the more reflective the surface is.These sensors are widely used in line following robots. White surfaces reflect more light than black, so, when directed towards a white surface, the capacitor will discharge faster than it would when pointed towards a black surface.The power input and output pins are brought out to a 3-pin, 0.1" pitch header. The board also has a single mounting hole if you want to screw it onto something.Feature:Operating voltage: 5VDC Current: 25mADigital I/O compatibleNo ADC requiredOptimal sensing distance: 0.125" (3mm)Dimension: 0.3x0.55"Package includes:1 x Sensor module1 x Pin

  • Brand: DIYElectronic
  • ASIN: B07RV7BB5Z
Similar Ir Reflective Sensor Results
Ir Reflective Sensor Video Reviews

TCRT5000 Infrared Reflective Sensor - How it works and example circuit with code.

Ir Reflective Sensor

Here is a brief overview of the TCRT5000 Reflective infrared sensor. I'll cover how it works and ...

Tags: TCRT5000,Arduino,Optical,Infrared,sensor,how to...

QRD1114 Reflective Object Sensor

Ir Reflective Sensor

This sensor uses an infrared emitting diode combined with an infrared phototransistor to detect t...

Tags: qrd1114

Photoelectric Sensors - Retro-Reflective - Part 2 - Datalogic

Ir Reflective Sensor

In this series we detail the mayor photoelectric sensor types and demonstrate their uses. For par...

Tags: data,logic,datalogic,flexible,assembly,systems,...

IR Sensor Working Tutorial

Ir Reflective Sensor

Get low cost IR Transmitter Receiver Pair at http://nevonexpress.com/Infrared-IR-Transmitter-Rece...

Tags:

Using IR sensor (TCRT 5000) with Arduino and program to remove noise

Ir Reflective Sensor

for details and code refer link: http://diy-india.org/using-ir-sensor/

Tags: Lock in,IR sensor,noise,denoise,noise remove,tc...