Eagle 1610MB Blue High Density Polyethylene Lab Pack Drum with Metal Lever-lock Lid, 14 gallon Capacity, 26.5" Height, 15" Diameter

Eagle 1610MB Blue High Density Polyethylene Lab Pack

The Eagle blue high-density polyethylene lab pack drum comes with a plastic lid and a metal lever-lock ring, has a 14-gallon capacity, and can be used to store, transport, and dispose of small, intact containers of hazardous materials and help contain spills. The drum is made of blue HDPE (high-density polyethylene), which weighs less than steel, is resistant to dents, punctures, and certain chemicals, and may be incinerated. The drum is blow-molded for wall strength and thinness. Ultraviolet (UV) inhibitors minimize fading and discoloring. The lever-lock ring can be used to secure the lid to the drum. Full drums can be stacked up to three high. The drum has a storage capacity of 14 gallons, weighs 8 lb., and measures approximately 26-1/2" high and 15" in diameter. It is suitable for holding containers with a capacity of 5 gallons or less.This product meets U.S. Department of Transportation (DOT) regulation 173.12 and United Nations (UN) standards concerning the packaging and shipping of hazardous materials. It can be used to store or transport hazardous materials in Packing Groups I, II, or III defined in the Code of Federal Regulations (CFR). It complies with U.S. Food and Drug Administration (FDA) regulation 177.1520 regarding food contact surfaces. It meets Underwriters Labor...

  • Color: Blue
  • Brand: Eagle
  • ASIN: B0026GO5CA
  • UPC: 048441002696

MTS Company 4740A High Density Polyethylene Fuel Tank

MTS Company 4740A High Density Polyethylene Fuel

2000-2010 Ford F350-F550 Super Duty Series "Diesel Only" 40 gallon rear truck tank. This tank replaces the 6 Bolt style sending unit, not the lock ring style. Each tank includes a specifically designed sending unit gasket, 6 new bolts with a tube of thread sealer and a sending unit hold down ring. When installing the sending unit, coat each screw with the thread sealant. Do NOT use the OEM sending unit gasket. This tank does NOT include a sending unit, an EMS valve or an EMS valve gasket.

  • Brand: MTS
  • ASIN: B008SH4DR8

High Density Polyethylene (HDPE) Plastic Welding Rod, 1/8" diameter, 30 ft., Natural

High Density Polyethylene (HDPE) Plastic Welding Rod, 1/8"

High Density Polyethylene (HDPE) welding rod in natural color. Each stick is 1 foot long (30 cm) long and there are 30 sticks in a pack. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Color: Natural
  • Brand: Polyvance
  • ASIN: B0007L7B5Y
  • UPC: 694687000714

Globe Scientific 601781-1 Industrial Tank, HDPE, 5 L, 9.5 mm Height, 6.5 mm Wide, 7.5 mm Length, High Density Polyethylene (HDPE)

Globe Scientific 601781-1 Industrial Tank, HDPE, 5 L,

The product is industrial tank, it features HDPE, 5 liter. Manufactured by Globe Scientific Inc and made in Italy.

  • Brand: Globe Scientific
  • ASIN: B00MN9YGAG

MTS Company 0065 High Density Polyethylene Fuel Tank

MTS Company 0065 High Density Polyethylene Fuel

1987-1995 Jeep Wrangler YJ 20 gallon tank with fuel bowl and rectangle sending unit hole. Replaces original 20 gallon plastic tank with or without fuel injection (this tank will replace what Jeep called a "15 gallon PLASTIC tank" w/ rectangle sending unit hole from 1991-1995). Includes new gasket and new upper straps. This tank will directly replace Domestic model numbers 52002633 and 52018287. This tank will NOT directly replace export model numbers 52018779, 52019226, 52007258 or 52002622 - a new skid plate and sending unit are required. (Examples of fitment issues: fill and vent pipes hit frame rail, sending unit to tall, tank doesn't sit flat on the skid plate, tank appears to be too tall). There is a possibility of additional OEM sku's, if yours does not match one of these six numbers, please call before ordering. Some early 1987-1990 Jeep 20 gallon plastic fuel tanks had an open ended skid plate without the rolled heat shield over the exhaust pipe, we recommend replacing the skid plate and fill hose/vent hose to resolve any fitment issues.

  • Brand: MTS
  • ASIN: B008SH4F3A
  • UPC: 123497612300

4 Quart Natural High Density Polyethylene Tank with Mounting Tabs 8.63" L x 4.17" W x 9.84" H (2.25" Neck)

4 Quart Natural High Density Polyethylene Tank with

High density polyethylene tanks are suitable in the following applications: windshield washer tanks, coolant recovery tanks, hydrostatic tanks, oil tanks, overflow bottles, soap tanks, solvent tanks, and hydraulic tanks. Caps sold separately. Some models are available with rugged mounting tab with slots for easy installation. All tanks have a blow molded seamless wall construction which gives the user the high quality and low maintenance necessary in fluid handling applications. Tanks are also 100% leak tested prior to shipment. All sizes listed are nominal. Height does not include neck; add .85" for overall height. On tanks with mounting tabs width includes mounting tabs. Max working temperature is 180°F and max working pressure is 5 psi. All tanks are UV resistant, accessories are not. Tanks do not meet CARB/EPA requirements and should not be used for fuel.

  • Brand: Flambeau
  • ASIN: B07F17NGD5

MTS Company 2050B High Density Polyethylene Fuel Tank

MTS Company 2050B High Density Polyethylene Fuel

High Puncture And Crack Resistance. No Welds Or Seams. Works With Stock Mounting Locations. Guaranteed Not To Rust Through For Life.

  • Color: Black
  • Brand: MTS
  • ASIN: B001ECX53C

5 Quart Natural High Density Polyethylene Tank with Mounting Tabs 8.62" L x 4.17" W x 12.9" H (2.25" Neck)

5 Quart Natural High Density Polyethylene Tank with

High density polyethylene tanks are suitable in the following applications: windshield washer tanks, coolant recovery tanks, hydrostatic tanks, oil tanks, overflow bottles, soap tanks, solvent tanks, and hydraulic tanks. Caps sold separately. Some models are available with rugged mounting tab with slots for easy installation. All tanks have a blow molded seamless wall construction which gives the user the high quality and low maintenance necessary in fluid handling applications. Tanks are also 100% leak tested prior to shipment. All sizes listed are nominal. Height does not include neck; add .85" for overall height. On tanks with mounting tabs width includes mounting tabs. Max working temperature is 180°F and max working pressure is 5 psi. All tanks are UV resistant, accessories are not. Tanks do not meet CARB/EPA requirements and should not be used for fuel.

  • Brand: Flambeau
  • ASIN: B07F1GWMDD

Gino Development 01-0143 Plastic Welding Kit with Black Plastic Rods and Mesh, 80W Iron

Gino Development 01-0143 Plastic Welding Kit with Black

This 80-Watt welding iron heats up quickly to a maximum temperature of 525 degrees F and can easily handle repairs on TPO, TEO and PP materials, which are often used in car bumpers. The welding iron comes with a standard multipurpose welding rod, steel wire mesh and wire brush

  • Color: Original Version
  • Brand: Gino Development
  • ASIN: B00B1FKCGA
  • UPC: 513595478845

MTS Company 2042 High Density Polyethylene Fuel Tank

MTS Company 2042 High Density Polyethylene Fuel

1971-1972 Full Size Chevy Blazer and Suburban 21 gallon tank. Includes lock ring and O-ring. Dimensions 29" x 14" x 17". "International buyers will be responsible for all import fees and duties. The Seller will not be responsible for any fees from the buyer importing this to his/her country"

  • Brand: MTS
  • ASIN: B001ED15TC

Globe Scientific 601782-1 Industrial Tank, HDPE, 10 L, 12.5 mm Height, 7.5 mm Wide, 8.5 mm Length, High Density Polyethylene (HDPE)

Globe Scientific 601782-1 Industrial Tank, HDPE, 10 L,

The product is industrial tank, it features HDPE, 10 liter. Manufactured by Globe Scientific Inc and made in Italy.

  • Brand: Globe Scientific
  • ASIN: B00MNA0V36

MTS Company 0050 High Density Polyethylene Fuel Tank

MTS Company 0050 High Density Polyethylene Fuel

1976-1977 Jeep CJ 15 gallon gas tank. This tank requires the 15 gal. OEM style skid plate for installation. Includes new lock ring and O-ring. This tank fits the 1972-1975 Jeep CJ but requires the 15 gal. OEM style skid plate, top strap and end straps. The original metal tank was bolted directly to the frame of the CJ.

  • Brand: MTS
  • ASIN: B001ECTN24

4 Quart High Density Polyethylene Plastic Windshield Washer Tank Assembly with 12 Volt Pump - 8-1/2" L x 4-1/4" W x 10" H

4 Quart High Density Polyethylene Plastic Windshield Washer

4 Quart Standard system includes the 12 volt pump and 2-1/4" vented cap with tether and international washer fluid symbol. Systems feature the same rugged, heavy-wall, seamless tank construction as the multi-purpose tanks.

  • Brand: Flambeau
  • ASIN: B07F186ML4

MTS Company 2050C High Density Polyethylene Fuel Tank

MTS Company 2050C High Density Polyethylene Fuel

High Puncture And Crack Resistance. No Welds Or Seams. Works With Stock Mounting Locations. Guaranteed Not To Rust Through For Life.

  • Brand: MTS
  • ASIN: B001ECX52S

High Density Polyethylene Express Service Tank 1 Quart 6.21" x 7.74" x 3.62"

High Density Polyethylene Express Service Tank 1 Quart

Constructed of high density polyethylene, these blow molded multi-purpose tanks offer excellent durability and resistance to most chemical and fluids. Express service tanks come with a cap and straight fittings. All tanks come with a 2-1/4" buttress thread cap and a straight fitting which fits a 1/4" hose except #10015 which includes a 1-5/8" top vented thread cap and the 1/4" straight fitting and 12070 and 12071 include a 1-5/8" thread vented cap and 1/4" straight fitting. All sizes nominal. Height includes neck & fittings. Width includes mounting tabs. Max working temperature is 180°F and max working pressure is 5 psi. Tanks do not meet CARB/EPA requirements and should not be used for fuel.

  • Brand: Flambeau
  • ASIN: B07F1CY9DP

Solo 430-2G 2-Gallon Farm and Garden Sprayer with Nozzle Tips for Multiple Spraying Needs

Solo 430-2G 2-Gallon Farm and Garden Sprayer with

This product has a great performance, quality and price. Two gallon pressure sprayer.. Features a funnel top and large opening for easy filling and cleaning.. Pressure relief valve carry strap Viton seals.. Plastic adjustable fan hollow cone and jet stream nozzles.. Large carry handle for easy pumping.. 28 inch wand.. Manufacturer: SOLO INCORPORATED P

  • Color: Original Version
  • Brand: Solo, Inc.
  • ASIN: B000HHO8IG
  • UPC: 720343432008

MTS 4740A 40 gallon diesel fuel tank - aft axle

MTS 4740A 40 gallon diesel fuel tank -

Ford F250 F350 F450 F550 Super Duty 2000 2001 2002 2003 NEW 40 Gallon Diesel Plastic Gas Tank replaces OEM part #s: XC3Z9002AA, 6C3Z9002BA, 6C3Z9002A, 6C3Z9002E, 6C3Z9002F, 3C3Z9002AA, and 5C3Z9002BB

  • Brand: gastanksusa
  • ASIN: B00GXFOL4M
  • UPC: 616320694340

4 Quart High Density Polyethylene Plastic Windshield Washer Tank Assembly with 24 Volt Pump - 8-1/2" L x 4-1/2" W x 10" H

4 Quart High Density Polyethylene Plastic Windshield Washer

4 Quart Standard system includes the 24 volt pump and 2-1/4" vented cap with tether and international washer fluid symbol. Systems feature the same rugged, heavy-wall, seamless tank construction as the multi-purpose tanks.

  • Brand: Flambeau
  • ASIN: B07F1TFJDY

MTS Company 4249A High Density Polyethylene Fuel Tank

MTS Company 4249A High Density Polyethylene Fuel

1973-1979 Ford Full-Size Pickup 19 gallon tank with EMS hole. Fits pickups with long wheel base regular cab and most crew cab with side tank. Our tank replaces the original metal tank NOT the original plastic tank. Not for Super Cab models or the 1967-1977.5 Ford"High Boy" Pickup. Includes new lock ring and O-ring. Length: 55". Replaces D8TZ9002K

  • Brand: MTS
  • ASIN: B001ECZ990

3 Quart Natural High Density Polyethylene Tank with Mounting Tabs 8.63" L x 4.25" W x 7.63" H (2.25" Neck)

3 Quart Natural High Density Polyethylene Tank with

High density polyethylene tanks are suitable in the following applications: windshield washer tanks, coolant recovery tanks, hydrostatic tanks, oil tanks, overflow bottles, soap tanks, solvent tanks, and hydraulic tanks. Caps sold separately. Some models are available with rugged mounting tab with slots for easy installation. All tanks have a blow molded seamless wall construction which gives the user the high quality and low maintenance necessary in fluid handling applications. Tanks are also 100% leak tested prior to shipment. All sizes listed are nominal. Height does not include neck; add .85" for overall height. On tanks with mounting tabs width includes mounting tabs. Max working temperature is 180°F and max working pressure is 5 psi. All tanks are UV resistant, accessories are not. Tanks do not meet CARB/EPA requirements and should not be used for fuel.

  • Brand: Flambeau
  • ASIN: B07F19VSB8
Similar High Density Polyethylene Tanks Results
High Density Polyethylene Tanks Video Reviews

Tek-Tanks Ltd - Manufacturing Custom Marine Tanks

High Density Polyethylene Tanks

Custom built marine tanks being made out of HDPE plastic using Leister plastic welding tools.

Tags: Tek-Tanks,marine tank,plastic welding

Polyethylene welding - How to Weld PE Plastic ?

High Density Polyethylene Tanks

Look more: https://ataszek.pl/137-wydajna-spawarka-do-plastiku-bosite-pid.html → In this video:...

Tags: Polyethylene,Polyethylene welding,welding plast...

What is HDPE?

High Density Polyethylene Tanks

High density polyethylene, or HDPE for short, is one of the most pervasive plastic types. It has ...

Tags: What,is,HDPE?,Container,and,packaging,supply,co...

Plastic repair (high density polyethylene)

High Density Polyethylene Tanks

R.V fresh water tank, damage during installation.(screw holes)

Tags:

Polyethylene Water Tank Repair – Crack

High Density Polyethylene Tanks

This post cover Polyethylene Water Tank Repair – Crack. We show you how to repair a crack in a P...

Tags: Polyethylene Water Tank Repair,Polyethylene Rep...