PEX Manifold Radiant Floor Heating Set 3 Loop System Stainless Steel Heated Hydronic Heating 1/2" Oxygen Barrier Tubing

PEX Manifold Radiant Floor Heating Set 3 Loop

The Heart of your Heating SystemRadiant Heat manifolds play a large part in heating systems. It allows for even distribution of supply water from the heat source to distribution lines that circulate hot water through the entire system. They can be used in a variety of applications ranging from radiant, hydronic, or snow-melt applications. The systems are made of adapters, end caps, and fittings that can be customized in a manifold depending on the application. A well-made manifold should distribute water efficiently and economically when the PEX tubing is sized properly. PEX manifolds reduce the need for soldering copper pipes, which prevents flames and chemicals getting into water lines causing problems. A Radiant PEX Manifold set can cover a large area depending on the branch. A 2-branch Radiant PEX Manifold Set can cover a maximum of 800 square feet to an 8-branch that can cover 1800-2200 square foot of floor.Our Radiant Floor Heating Manifold Set comes complete with:(1)- Manifold balance section Body with flow meters(1)- Manifold Isolation section Body with valves(2)- Mounting brackets (2)- Manifold Isolation ball valve with 1" (inch) NPT Pipe Connection(2)- Stem thermometer on each Manifold Isolation ball valve(2)- Manifold end capsAlso includes 1/2" Compression connectors-(...

  • Brand: CMI
  • ASIN: B075M23MWH
  • UPC: 847877050222

4 Loop Stainless Steel Manifold for Radiant Floor Heating with Brackets, Flow Meters and Temp Gauge

4 Loop Stainless Steel Manifold for Radiant Floor

The Stainless-steel Manifold Assembly with flow meter comes fully assembled and ready for installation. Use the included flow meters located on the supply manifold to balance the loops across the manifold. The return manifold comes equipped with isolation valves for easy loop isolation. For multiple zoning on the manifold, the black caps are removed and replaced with Thermal Actuators (should be purchased separately)

  • Color: Silver
  • Brand: ALL TECH SITE
  • ASIN: B07PFFGD2Y
  • UPC: 696303092172

TargetEvo 4 Loop 1/2 PEX Manifold Stainless Steel Radiant Floor Heating Set Kit with Adjustable Flow Valves Automatic Air Vent

TargetEvo 4 Loop 1/2 PEX Manifold Stainless Steel

Test: 1.Open inlet and drain valve, the water in mainfold pipe enters the water distributor. Take off the red protective cap of flowmeter, then adjust flowrate. 2.Open automatic air vent, the air inside the water distributor will run out. 3.Test the system in running state to make sure there is no leak point. Test time should be 24 hours. (The pressure is under 1.0-1.2Mpa) 4.Check carefully to make sure there is no warer seepage or dripping in the connection point of each part. If there is any problem, please close the inlet and drain valve first.Then repair the pipe and test again. 5.The system test index can meet the requirement of user. Note: 1.The maximum pressure value of the system must under 1.2 Mpa. 2.Not suitable for drinking wate. Specification: Material: 304 stainless steel Color: silver The whole size of 4 loop: 15.7 x 13.7 inches The whole size of 6 loop: 18.9 x 13.7 inches Finish: Polishing & brush Installation: Bracket Work temperature: 33.8 F - 203 F Mainfold diameter: G 1"" (DN25) Branch pipe diameter: G1/2 - DN15£¨PEX Both ends of the main tread: G 1" Thread (Female) Working medium: water, vapor Branch interval: 50mm Applicable pressure: 1.5Mpa Mainfold trunk size: equivalent of DN40 Temperature control: 3mm Delivery: 1 * 304 stainless steel radiant floor h...

  • Color: 4 Loop
  • Brand: TargetEvo
  • ASIN: B0799D43Q9

VIVO 4 Loop 1/2 inch Pex Manifold Stainless Steel Radiant Floor Heating Set | 4 Branch Kit (PEX-M12-4)

VIVO 4 Loop 1/2 inch Pex Manifold Stainless

PEX-M12-4 is a stainless steel 4 Loop Radiant Manifold kit from VIVO. Features include body flow meters with adjustable flow rates, isolation ball valve with 1" NPT thread made of high-quality brass forging, stem thermometers for both isolation ball valves, automatic air purge valves, ½" compression connectors, and mounting brackets. Each port is spaced 2" apart and has its own turn off valve. The entire manifold measures approximately 10" x 15" and has an approximate weight of 12lbs. PEX-M12-4 is commonly used for radiant floor heat systems and features easy installation. Complete kit as shown in the pictures provided (1 supply manifold, 1 return manifold, 4 flow meters, 8 adapters (1/2"), 2 isolation ball valves with 1" NPT and temperature gauges, 2 air vents, 2 drain valves, 1 heavy duty mounting bracket. Not suitable for potable water applications.

  • Brand: VIVO
  • ASIN: B011W54YL2
  • UPC: 641020645200

5 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING

5 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE

5 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Fitting Stores
  • ASIN: B07CQ8XSMS

4 Loop Stainless Steel Premium PEX Manifold With 1/2" Connectors for Radiant Heating - PEX GUY (4 Loops)

4 Loop Stainless Steel Premium PEX Manifold With

This 4 loop manifold is produced with high quality stainless steel. It comes complete with 1/2" PEX compression fittings so you will not need any additional PEX tools to fasten the PEX loops to the manifold. All you need is an adjustable wrench to secure the compression fittings. If you are looking for a different type or a manifold with different loops, you can view our different options in the Radiant Heating Manifolds section of the store.

  • Brand: PEX GUY
  • ASIN: B01F9LVPCQ

Mophorn Radiant Floor Manifold Set 5 Loop 1/2 Inch PEX Manifold Kit Stainless Steel 5 Branch Radiant Floor Heating Manifold Automatic Air Vent Manifold for 1/2" PEX Tubing (5 Loop)

Mophorn Radiant Floor Manifold Set 5 Loop 1/2

PEX Manifold 5 Loop 1/2Inch PEX Radiant Floor Heating Set Stainless Steel Radiant Heat Manifold Automatic Air Vent This PEX Manifold is a stainless steel 5 Loop Radiant Manifold kit Features include body flow meters with adjustable flow rates, isolation ball valve with 1" NPT thread made of high-quality brass forging, stem thermometers for both isolation ball valves, automatic air purge valves, 1/2" compression connectors, and mounting brackets. Each port is spaced 2" apart and has its own turn off valve. Tech Date: No. of PEX outlets: 10 (5 on the Supply PEX manifold + 5 on the Return PEX manifold); For use with PEX tubing sizes: 3/8", 1/2" & 5/8"; Manifold trunk size: 1-1/4"; Valve inlet connections: 1" NPT; Distance between PEX branches (on center): 2"; Max. flow per individual branch: 1.4 GPM; Overall width (with valves): 17.5"; Overall height: 14"; Overall depth: 4" (will fit inside a 2x4 frame wall); Features Supply PEX manifold with (5) PEX tubing outlets and (5) adjustable flow meters; Return PEX manifold with (5) PEX tubing outlets and (5) balancing (flow adjustment) valves: Isolation ball valves with 1" NPT connections and pressure gauges; Automatic air vent (air eliminator):Float type air vent is used to automatically purge the air out of the radiant heat system. Air ...

  • Color: 5 Loop
  • Brand: Mophorn
  • ASIN: B01N6IGA1F
  • UPC: 712166607350

6 Loop Stainless Steel Manifold for Radiant Floor Heating with Brackets, Flow Meters and Temp Gauge

6 Loop Stainless Steel Manifold for Radiant Floor

The Stainless-steel Manifold Assembly with flow meter comes fully assembled and ready for installation. Use the included flow meters located on the supply manifold to balance the loops across the manifold. The return manifold comes equipped with isolation valves for easy loop isolation. For multiple zoning on the manifold, the black caps are removed and replaced with Thermal Actuators (should be purchased separately)

  • Color: Silver
  • Brand: ALL TECH SITE
  • ASIN: B07PGJ25MN
  • UPC: 696303092219

Brass PEX Radiant Heating Manifold for 1/2" PEX tubing w/ Bracket - PEX GUY (4 loop)

Brass PEX Radiant Heating Manifold for 1/2" PEX

4 port Classic Manifold Set (1 supply, 1 return set) This is a set of PEX manifolds that includes: 2 pcs. - 4 port isolation manifold with ball valves (supply - red handle) 8 pcs. - 1/2" PEX connectors and also fits 1/2" PEX-AL-PEX (compression fittings) 2 pcs. - end caps (brass or nickle plated based on availability, Must also include Teflon tape to ensure a watertight seal) Specifics: - Compression fittings can ONLY be used with 1/2" PEX A, 1/2" PEX B, 1/2" PEX C or 1/2" PEX-AL-PEX - Other size connectors not available for this manifold. - Compression fitting comes with double O-ring on the port side and double O-ring on the PEX side to ensure leak free seal. - 3/4" pipe thread on inlet and outlet - Solid High Quality Nickle Plated Design - Main Body is made of Brass - Make sure to use teflon tape in connecting section of manifold to insure leak-free seal

  • Brand: PEX GUY
  • ASIN: B077SVG2QK

4 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE STAINLESS STEEL RADIANT HEATING

4 LOOP/BRANCH 1/2" PEX MANIFOLD WITH BALL VALVE

4 - Loop Stainless Steel Radiant Manifold, Made of High Quality Stainless Steel

  • Brand: Fitting Stores
  • ASIN: B07CQ66ZLZ
Similar Heating Manifold Results
Heating Manifold Video Reviews

Manifolds for a Heating System

Heating Manifold

A manifold is the hub of a heating system, and distributes water throughout a home. It provides a...

Tags: heating manifold,manifold,Plumbing & Heating,He...

Installing the JG Speedfit Underfloor Heating Manifold

Heating Manifold

The installation of the manifold is an integral stage of a heating system. The JG Speedfit manifo...

Tags: underfloor heating,renovation,construction,plum...

Uponor Minute: Manifold Balancing for Radiant Heating and Cooling

Heating Manifold

Wes Sisco, from Uponor, shows how easy it is to balance an engineered polymer manifold for Uponor...

Tags: manifold balancing,PEX tubing,PEX-a,Engineered ...

Bad Plumbing Heating manifold - Time to repair

Heating Manifold

Heres a quick look at a home made manifold i found under the floor boards at my house! Bad/maybe ...

Tags: plumbing,copper,bad plumbing,manifold,diy,speed...

UNDERFLOOR HEATING GUIDE AND INSTALL PART 2 - Plumbing Tips

Heating Manifold

Underfloor heating explained in part two of our installation video. We show you how a manifold is...

Tags: underfloor,heating,guide,explained,explanation,...