Edelbrock 1483 THROTTLE LEVER

Edelbrock 1483 THROTTLE

The Edelbrock Throttle lever Adapter is designed for automatic transmission equipped vehicles with cable operated throttle except AOD (Auto Overdrive Transmission). These adapters work with cruise control.

  • Brand: Edelbrock
  • ASIN: B000CN4ZQK
  • UPC: 085347014835

Edelbrock 8009 THROTTLE LINKAGE

Edelbrock 8009 THROTTLE

Performer Series; Throttle Cable Adapter-GM.

  • Brand: Edelbrock
  • ASIN: B000CN713O
  • UPC: 085347080090

Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel Air Valve Secondary Electric Choke Carburetor

Edelbrock 1406 Performer 600 CFM Square Bore 4-Barrel

The Edelbrock Performer Square Bore Air Valve Secondary Electric Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. It is designed and calibrated for good street performance and fuel economy in 402 CID and larger engines with the Edelbrock Performer manifolds. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. The Performer electric choke carburetor includes both timed and full vacuum ports for ignition advance. The carburetors use easily changed metering rods for precise tuning. The Edelbrock Performer covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B000182DIS
  • UPC: 085347014064

Edelbrock 1405 Carburetor

Edelbrock 1405

The Edelbrock Performer Square Bore Air Valve Secondary Manual Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. It is designed and calibrated for good street performance and fuel economy in 402 CID and larger engines with the Edelbrock Performer manifolds. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. The Performer manual choke carburetor includes both timed and full vacuum ports for ignition advance. The carburetors use easily changed metering rods for precise tuning. The Edelbrock Performer covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B000182DII
  • UPC: 085347014057

Edelbrock 1481 THROTTLE LEVER

Edelbrock 1481 THROTTLE

The Edelbrock Throttle Lever Adapters are designed for easy connection of your factory cable-operated linkages to your new Edelbrock Performer carburetor. They are available in a gold iridized finish to match the Edelbrock Performer Series carburetors.

  • Brand: Edelbrock
  • ASIN: B000CNAOM4
  • UPC: 085347014811

Edelbrock 1473 CARBURETOR LINKAGE

Edelbrock 1473 CARBURETOR

The Edelbrock Performer Series Linkage Kit includes a linkage assortment to hook up the throttle lever linkage. They are designed for the Performance Series carburetors. The kit includes 1 each of 7 links and 6 retaining clips.

  • Brand: Edelbrock
  • ASIN: B000CN8W78
  • UPC: 085347014736

Edelbrock 1495 THROTTLE ADAPTER

Edelbrock 1495 THROTTLE

The Edelbrock Throttle Cable Plate Kits are designed for engines with cable operated throttle and automatic kick down rod. This throttle cable plate kit is specially designed for throttle level adapters to reposition the factory throttle cable with the Edelbrock Performer Series carburetors. The bracket is made of steel with a gold iridite finish. This bracket has a carburetor base mounting style. It does not accept transmission kick down cable and does not include the return spring. It does include hardware and the throttle return spring.

  • Brand: Edelbrock
  • ASIN: B000CN6VQW
  • UPC: 085347014958

Edelbrock 1407 CARBURETOR

Edelbrock 1407

The Edelbrock Performer Square Bore Air Valve Secondary Manual Choke New Carburetor features a two-piece, all-aluminum construction for cooler operating temperatures and less warping. It is designed and calibrated for good street performance and fuel economy in 402 CID and larger engines with the Edelbrock Performer manifolds. There are no gaskets below the fuel bowl level for fewer leaks and no plastic parts or power valves to blow out. The Performer manual choke carburetor includes both timed and full vacuum ports for ignition advance. The carburetors use easily changed metering rods for precise tuning. The Edelbrock Performer covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B000182DJ2
  • UPC: 085347014071

Edelbrock EDL-1826 Thunder Series 650 CFM Square Bore 4-Barrel Electric Choke New Carburetor

Edelbrock EDL-1826 Thunder Series 650 CFM Square Bore

The Edelbrock Thunder Series Electric Choke New Carburetor features unique AVS (Adjustable Valve Secondary), which allows simple and accurate tuning of the secondary circuit with simple hand tools while installed on the vehicle. The counterweighted secondary design utilizes a heavy, non adjustable counterweight that relies on the velocity of the air coming through the secondary venturis to roll open the secondary air door, thus helping to eliminate primary to secondary stumbles. The newly designed primary and secondary booster clusters offer the most accurate and up to date calibration available. The outside of the carburetor body is ball burnished for a bright finish. There are no gaskets below the fuel bowl level for a leak-free operation. The carburetor two-piece design makes it easy to change jets or adjust the floats. The needles, springs, jets and floats can be replaced and tuned without draining the fuel. Complete tuning can be done without removing the carburetor from the intake manifold.

  • Brand: Edelbrock
  • ASIN: B0009PAYJ8
  • UPC: 085347018260

Edelbrock 8026 WATER NECK ADAPTER

Edelbrock 8026 WATER NECK

Designed and calibrated for small cubic-inch engines such as 305 c. i. d and smaller Chevrolet; 302 c. i. d. and smaller Ford and dual-quad applications such as our new RPM Dual-Quad Air-Gap, Edelbrock C-26, F-28 and Street Tunnel Ram. For single carb applications, match with an Edelbrock Performer or Performer EPS manifold or other brands of similar design. Includes both timed and full vacuum ports for ignition advance. #1801/#1802 are calibrated for single-quad applications and factory equipped with: Metering Jets - Primary . 086, Secondary . 095, Primary Rod . 065 x . 052, orange spring (5" Hg). #1803/#1804 is calibrated for dual-quad applications and factory equipped with: Metering Jets - Primary . 086, Secondary . 077; Metering Rods - . 065 x . 057; #1804 includes Primary . 086, Secondary . 077; Metering Rods - . 065 x . 052; Step-Up Spring - orange (5" Hg). Use Carb Studs #8008 or #8024 if needed.

  • Brand: Edelbrock
  • ASIN: B00K9ZXFAI
  • UPC: 085347080267

Edelbrock 8059 CARB COMPONENTS

Edelbrock 8059 CARB

An assortment of throttle brackets and hardware for your Performer or Thunder AVS, Series Carburetors.

  • Brand: Edelbrock
  • ASIN: B00062YCWY
  • UPC: 085347080595

Edelbrock 1409 CARBURETOR

Edelbrock 1409

The Edelbrock Performer Series Marine Square Bore Air Valve Secondary Electric Choke New Carburetor features modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8 inch inverted flare fuel inlet fitting, tube in air horn for fuel pump vent, 5-1/8 inch flame arrestor flange, universal throttle lever and a revised secondary system for improved transient performance in marine applications. The Edelbrock square-bore carburetors are all-aluminum, ball-burnished and lightweight. There are no power valves to blow or plastic parts to break. The two-piece construction resists warping. Metering rods can be changed within seconds without carburetor removal. Their simple tub-type bowl and rear-pivot floats offer you trouble-free operation. The Edelbrock Performer warranty covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B00062YA80
  • UPC: 085347014095

Edelbrock 1223 AIR CLEANER

Edelbrock 1223 AIR

Delbruck triple chrome-plated round air cleaners work with all popular 5-1/8" diameter carburetors (Performer Series, Thunder Series AVS, Holley, Thermos-Quad, Quadra jet and Carter AFB). The 10" and 14" models have knock-outs in the air cleaner base for use with Delbruck crank case ventilation adapter #1205 (sold separately). #1208, #1209 and #1221 fit all Delbruck carburetors. Heights of air cleaners are in parentheses, measured from the gasket flange to the top of the supplied retaining nut. Dimensions are accurate within 1/8".

  • Brand: Edelbrock
  • ASIN: B003D29T4A
  • UPC: 085347012237

Edelbrock 1410 CARBURETOR

Edelbrock 1410

The Edelbrock Performer Series Marine Square Bore Air Valve Secondary Electric Choke New Carburetor features modified bowl venting, specially designed throttle shafts, accelerator pump seal, 3/8 inch inverted flare fuel inlet fitting, tube in air horn for fuel pump vent, 5-1/8 inch flame arrestor flange, universal throttle lever and a revised secondary system for improved transient performance in marine applications. The Edelbrock square-bore carburetors are all-aluminum, ball-burnished and lightweight. There are no power valves to blow or plastic parts to break. The two-piece construction resists warping. Metering rods can be changed within seconds without carburetor removal. Their simple tub-type bowl and rear-pivot floats offer you trouble-free operation. The Edelbrock Performer covers the replacement or repair of the product only and does not cover the cost of removal and installation.

  • Brand: Edelbrock
  • ASIN: B00062YA6W
  • UPC: 085347014101

Edelbrock 7561 INTAKE MANIFOLD

Edelbrock 7561 INTAKE

The Edelbrock Exclusive Air-Gap design from Edelbrock features an open space between the intake runners and the hot engine oil resulting in a cooler, denser charge and more power. The Air-Gap manifolds are modeled after Performer RPM intakes for high-performance street power from idle 1, 500 to 6, 500 RPM and Performer Series intakes for power from idle to 5, 500 RPM.

  • Brand: Edelbrock
  • ASIN: B00062ZHBY
  • UPC: 085347075614

Edelbrock 1493 THROTTLE ADAPTER

Edelbrock 1493 THROTTLE

The Throttle Cable Plate Kits are for use with the Edelbrock-1483 throttle level adapters to reposition your factory throttle cable with the Performer Series carburetors. They are designed for products with cable operated throttles and automatic kick down rods.

  • Brand: Edelbrock
  • ASIN: B000CNAOPQ
  • UPC: 085347014934

Edelbrock 1487 JET AND ROD KIT

Edelbrock 1487 JET AND ROD

The Performer Series Carburetor Calibration Kit includes an assortment of metering rods and jets, one pair of metering rod retaining springs and a complete assortment of step-up springs and parts needed to help you get the best performance. It is sold as a kit.

  • Brand: Edelbrock
  • ASIN: B00062YBTS
  • UPC: 085347014873

Edelbrock 9905 REMAN CARB

Edelbrock 9905 REMAN

The Edelbrock Performer 600 CFM Manual Choke Remanufactured Carburetors are completely disassembled, inspected and thoroughly cleaned before reassembly for maximum fuel economy. Any parts that fail the strict performance standards are replaced with new ones. They are backed by a 30 day manufactory and 100% .

  • Brand: Edelbrock
  • ASIN: B000CSQUJ0
  • UPC: 085347099054

Edelbrock 2102 CAMSHAFT KIT

Edelbrock 2102 CAMSHAFT

The Edelbrock Performer-Plus Camshaft and Lifter Kit are part of the total power package to produce optimum torque from the low-end to the mid-range. It features smooth idling cams for daily drivers, trucks or vans. The advertised intake duration is 278 degrees and the exhaust duration is 288 degrees. The camshaft comes with hydraulic lifters, assembly lube and full instructions. The intake valve lift with factory rocker arm ratio is 0.42 and the exhaust valve lift with factory rocker arm ratio is 0.442.

  • Brand: Edelbrock
  • ASIN: B000CN8X5O
  • UPC: 085347021024

Edelbrock 7101 INTAKE MANIFOLD

Edelbrock 7101 INTAKE

The Edelbrock Performer RPM Intake Manifold is intended for high-performance street or competition engines that run up to 6, 500 RPM with maximum power. The front height of the manifold measures 4. 20 and the rear 5. 25. The Performer RPMs are dual-plane, high-rise intakes with a 180 degree firing order. This manifold produces incredible top-end horsepower while retaining good throttle response. The Performer RPMs have larger plenums and runners to match the free-flowing exhaust, high-lift cams and other modifications of a high output engine. It is not for emissions-equipped engines. A Performer RPM intake gives you the ultimate in street high-performance. It provides power like a single-plane and throttle response like a dual-plane.

  • Brand: Edelbrock
  • ASIN: B00062YSIW
  • UPC: 085347071012

Edelbrock 1813 CARBURETOR

Edelbrock 1813

The Edelbrock Thunder Series AVS Carburetor is designed and calibrated to deliver optimum street performance. It comes with an added twist and a quick tune secondary air valve. This air valve can be easily adjusted to match your needs of having the secondary's kick in early or late. The air valve can be set using standard tools and no extra springs are needed. This CNC-profiled, ball-burnished aluminum carburetor features black accented hardware and throttle linkage. It includes smooth transition from part to full throttle with leak free operation. This carburetor sports a silver finish and a square bore flange with 4 barrels.

  • Brand: Edelbrock
  • ASIN: B000630G0U
  • UPC: 085347018130

Edelbrock 9266 GASKET

Edelbrock 9266

The Edelbrock Heat Insulator Gasket is designed to prevent fuel percolation in Performer Series and Thunder Series AVS carburetors exposed to extreme underwood temperatures. This is a 4-barrel gasket, which is made up of a nitrile rubber composite. It has a 2-hole divided center and is 0. 320 inch in thickness. This gasket comes with extended carburetor studs.

  • Brand: Edelbrock
  • ASIN: B00062YBPM
  • UPC: 085347092666

Edelbrock 1491 THROTTLE ADAPTER

Edelbrock 1491 THROTTLE

The Edelbrock Throttle Cable Plate Kits are for use with the Edelbrock-1483 throttle level adapters to reposition your factory throttle cable with the Edelbrock Performer Series carburetors. They are designed for products with cable operated throttles and automatic kick down rods.

  • Brand: Edelbrock
  • ASIN: B000CNAOP6
  • UPC: 085347014910

Edelbrock 7186 INTAKE MANIFOLD

Edelbrock 7186 INTAKE

The Edelbrock Performer RPM Intake Manifold is the network of passages that direct air or air-fuel mixture from the throttle body to the intake ports in the cylinder head. The Performer RPM intake manifolds have a high-rise, dual-plane layout, with patented runner tuning and a 180 degree firing order. Performer RPM's have larger plenums and runners to match the free-flowing exhaust, high-lift cams, and other modifications of a high-output engine. It is recommended for high-performance street, strip and fresh water marine applications. They are intended for high-performance street or competition engines that run from 1, 500 to 6, 500 RPM. They produce incredible top-end horsepower, while retaining good throttle response. The high flow runner design will handle the popular stroker combinations.

  • Brand: Edelbrock
  • ASIN: B00062Z2YQ
  • UPC: 085347071869
Similar Edelbrock Performer Series Throttle Results
Edelbrock Performer Series Throttle Video Reviews

Edelbrock Throttle Valve Cable Adapters

Edelbrock Performer Series Throttle

Edelbrock throttle valve cable adapters are designed to correct the angle of the transmission Thr...

Tags: Edelbrock,Throttle adaptor,Throttle valve cable...

Edelbrock throttle bracket

Edelbrock Performer Series Throttle

Making a throttle bracket for a Edelbrock 600 carb on a 1970 Mustang 302

Tags: 1965,1966,1967,1968,1969,1970,Mustang throttle,...

Edelbrock Carburetor Installation and Adjustments

Edelbrock Performer Series Throttle

This is the official video for installing and adjusting Edelbrock carburetors that Vic Edelbrock ...

Tags: how to adjust an Edelbrock carb,Edelbrock carb ...

Edelbrock Carburetors - Additional Tuning

Edelbrock Performer Series Throttle

For additional tuning and adjusting, such as changing metering rods and jets, this video will gui...

Tags: Troubleshooting,Carburetor,Edelbrock,Performer,...

Edelbrock 1406 on my 1976 Chrysler Newport.

Edelbrock Performer Series Throttle

Tags: