Penta Angel 5 Sets PCB DIN Rail Mounting Adapter Circuit Board Mounting Bracket Holder Carrier Clips, for 35mm, 15mm DIN rail (Green)

Penta Angel 5 Sets PCB DIN Rail Mounting

Material:plastic Color:green Size:42.6x10x19.3mm/1.67X0.39X0.76inch One set weight:0.3oz Compatible Din Rail Size:35mm(C45 Rail) and 15mm Perfect for mounting the length and width of less than 100mm PCB board Package included: 5 Sets PCB Din Rail Mounting Clips

  • Color: Green
  • Brand: PENTA ANGEL
  • ASIN: B01H1H86UU
  • UPC: 764485743882

DIN Rail Mounting Brackets, 35mm x 68mm, Black, RoHS Compliant, 10-PACK

DIN Rail Mounting Brackets, 35mm x 68mm, Black,

Use these sturdy brackets to mount devices to standard 35mm DIN rail. This item is a package of 10 clips. These are general-purpose clips constructed of glass-fiber reinforced Nylon material. They are designed to work with rail depths of 7.5mm or greater. Three bracket sizes are available. Installation and removal from the DIN rail are easy. When on the rail, the clip "grips" the rail on both the top and bottom lips of the rail. The "fixed" (not spring-loaded) tab of the clip should go on the top so that it bears the load. The spring-loaded tab should go on the bottom. To remove the DIN clip from the rail, simply push upwards on the DIN clip (thereby compressing the springs in the bottom), pivot the top of the clip off of the rail, and then move the whole clip down to also release the bottom of the clip. No screwdrivers or special tools are required. The mounting holes in this bracket are non-threaded; intended usage is for the screw to pass through the clip and thread into the device being mounted. The holes allow up to a #8 machine screw or a #6 sheet metal screw to pass through (a #8 sheet metal screw will NOT pass cleanly through the holes, although a #8 machine screw does fit). Note that the surface of the device being mounted to the DIN clip should be flat and cover the DIN...

  • Brand: Winford Engineering
  • ASIN: B01JPX7OME

Electronics-Salon 5 Sets DIN Rail Mounting Adapter Bracket Holder Carrier Clips, for 35mm, 32mm or 15mm DIN Rail.

Electronics-Salon 5 Sets DIN Rail Mounting Adapter Bracket

DIN Rail Mounting Adapter Bracket, for 35mm, 32mm or 15mm DIN rail. Quantity: 5 Sets (Adapter 10pcs and Screw 20pcs). High quality Taiwan fireproof nylon material DIN rail mounting carrier (not China low quality carrier). The universal adapters are used to secure and hold electrical or electronic switching devices. They allow fully insulated mounting of components or DIN rails.

  • Brand: Electronics-Salon
  • ASIN: B00U6W7Y3I

Comidox Set of 5 PCB Din C45 Rail Adapter Circuit Board Mounting Bracket Holder Carrier 35mm

Comidox Set of 5 PCB Din C45 Rail

description 1. Some pics look like larger size,please notice the exact items size. 2. Please note: 1cm = 0.394 inch, 1 inch=2.54cm, please allow 1-2CM error. thanks! 3. Package includes: 1 Set (Adapter 2PCS and Screw4PCS)

  • Brand: Comidox
  • ASIN: B0787WX58B
  • UPC: 661083141662

Sysly 5 Sets PCB DIN Rail Mounting Adapter Circuit Board Mounting Bracket Holder Carrier Clips, for 35mm, 15mm DIN Rail (Green)

Sysly 5 Sets PCB DIN Rail Mounting Adapter

Material: PA66 Color:green Size:42.6x10x19.3mm/1.67X0.39X0.76inch One set weight:0.3oz Compatible Din Rail Size:35mm(C45 Rail) and 15mm Perfect for mounting the length and width of less than 100mm PCB board Package included: 5 Sets PCB Din Rail Mounting Clips

  • Brand: Sysly
  • ASIN: B074TGS2ZX

DIN Rail Mount Bracket Equipment Rack G3NE G3NA Electrical for SSR R99-12 Fins

DIN Rail Mount Bracket Equipment Rack G3NE G3NA

Features: 1.Material:brass 2.Normally open 3.For mounting plate model G3MA/G3ME 4.Install mounting plate model G3MA/G3ME in DIN model R99-12 Package included: 1x SSR nail

  • Brand: Balance World Inc
  • ASIN: B071KQ27GD

Uxcell a15052000ux0058 50Pcs 35mm DIN Rail Terminal Block End Stopper Mounting Clips (Pack of 50)

Uxcell a15052000ux0058 50Pcs 35mm DIN Rail Terminal Block

This terminal block end stopper made of plastic material, and screw fixed type is suitable for 35mm din rail..

  • Brand: uxcell
  • ASIN: B012SYCBG6
  • UPC: 711331996336

BIN BON - 35mm DIN Rail fixed clamp fasten clip

BIN BON - 35mm DIN Rail fixed clamp

1576562235508541fixed clamp 100mm DIN Rail fixed clamp fasten clip PLC clip switchboard exchange board Clamp US $ 1.40 /piece80mm DIN Rail fixed clamp fasten clip PLC clip switchboard exchange board Clamp US $ 1.20 /piece35mm DIN Rail fixed clamp fasten clip PLC clip switchboard exchange board Clamp US $ 0.55 /piece20MM DIN Rail fixed clamp fasten clip PLC clip switchboard exchange board Clamp US $ 0.52 /piece45MM DIN Rail fixed clamp fasten clip PLC clip switchboard exchange board Clamp US $ 0.60 /piece35mm DIN Rail fixed clamp fasten clip PLC clip switchboard exchange board Clamp 35*47mm hole distance 20mm US $ 0.50 /piece2pcs fixed clamp fasten clip for 35mm DIN Rail US $ 0.18 /piece35mm DIN Rail fixed clamp fasten clip US $ 0.90 /piece2pcs 35mm DIN Rail fixed clamp fasten clip US $ 0.18 /piececircirt breaker C45 Din Rail Clips EW35 din rail fastner US $ 0.32 /piece2pcs UK Terminal Block circuit breaker Din Rail Clips US $ 0.19 /piecesingle phase SSR 35MM DIN rail fixed solid state relay clip clamp with 2 mounting screws US $ 0.50 /piece      fixation: screws on the device, or the use of powerful glue on the device   

  • Brand: BIN BON
  • ASIN: B07G73V83V
  • UPC: 826704865338

DIN Rail Mounting Clips and Screws, Pack of 10 Sets

DIN Rail Mounting Clips and Screws, Pack of

Pack of 10 sets of: two DIN rail mounting clips and four #6 x 3/8" stainless steel sheet metal screws. (Total of 20 clips and 40 screws) Clips are for standard 35mm DIN rail. A #2 phillips (+) screwdriver is required to assemble. DIN rail not included

  • ASIN: B00VMX1008
  • UPC: 633726074859

10sets PCB DIN C45 Rail Adapter Circuit Board Mounting Bracket Holder Carrier, 35mm DIN Rail (Green)

10sets PCB DIN C45 Rail Adapter Circuit Board

Specifications: Model: KPRH-175 Quantity: 10sets Size: Approx. 42.6 x 10 x 19.3mm / 1.68 x 0.39 x 0.76in Weight: Approx. 126g Package Included: 10sets x PCB Bracket

  • Brand: Hilitand
  • ASIN: B07HTBVZFK
  • UPC: 792117494819

Coolgear USB 3.1 4 Port Metal Hub w/DIN Rail Clip & ESD Surge Protection

Coolgear USB 3.1 4 Port Metal Hub w/DIN

The Coolgear USB 3.1 Gen1 hub is a 4 port industrial hub with a small form factor that accommodates up to 5Gbps of data transmission. It's both surface and DIN Rail mountable with its included DIN Rail clips and screws. It supports Windows 7, 8, 8.1, 10, Linux, and Mac OS10.X operating systems and supports 5 hops to cascade with other hubs. The USB 3.1 4 port hub is small enough to fit in the palm of your hand yet can handle large amounts of super-speed data from its downstream ports. Each of the USB 3.1 ports supports the battery charging specification 1.2 for normal charging at .900mA per port. Normal charging allows the USB hub to charge low power devices that depend on charging to operate. Operating USB equipment such as printers, scanners, portable drives, virtual reality gear and others are not a problem with this USB 3.1 Gen1 hub. USB 3.1 4 Port Hub Features Supports systems with USB 3.0, 2.0, 1.1 ports Provides 4 downstream ports supporting 5Gbps data speeds Compliant with USB 3.1 Gen1 specifications Provides 1 upstream port to the host computer Backward compatible with data speeds of up to 5Gbps Super-Speed, 480Mbps High-Speed, and 12Mbps Full-Speed, and 1.5Mbps Low-Speed BC 1.2 compliant for normal charging Supports 15KV ESD surge protection for each port Dimensions: 3...

  • Color: Black
  • Brand: Coolgear
  • ASIN: B073XV65M4
  • UPC: 736983900173

Mounting Hardware ALUM DIN CLIP 75MM FOR 35MM DIN RAILS (1 piece)

Mounting Hardware ALUM DIN CLIP 75MM FOR 35MM

DIN CLIP, 35MM DIN RAIL ENCLOSURE; Accessory Type:DIN Clip; For Use With:35mm Wide DIN rail Enclosures; Product Range:- ;RoHS Compliant: Yes

  • ASIN: B00HKI2W06

T&G 10 Pieces DIN Rail Slotted Aluminum RoHS 8" Inches Long 35mm Wide 7.5mm High

T&G 10 Pieces DIN Rail Slotted Aluminum RoHS

35mm wide 7.5mm high Aluminum RoHS Compliant Slotted Due to center-to-center distance of mounting slots, rails may be 7.75" - 8" in length

  • Brand: T&G
  • ASIN: B07NVWD67L
  • UPC: 737123111336

Electrodepot Slotted Aluminum DIN Rail, 35mm x 8", Silver - 2 Pieces with 4#10 Stainless Steel Screws

Electrodepot Slotted Aluminum DIN Rail, 35mm x 8",

DIN Rails are the standard mounting support for any electromechanical component, device or equipment designed using the DIN specifications adopted byEuropean (EN) and international (IEC) standards.Each aluminum rail has conveniently placed slots throughout its length making it easy to attach to a panel, wall or equipment. Can be used to support minicircuit breakers, contactors, auxiliary relays, terminal blocks, low voltage apparatuses, etc.Specifications Material: Aluminum Width: 35 millimeters (1 3/8 inches) Length: 203.2 millimeters (8 inches) Thickness: 5 millimeters (0.2 inches) Slots: 8 Color: Silver Standards: EN/IEC and RoHS Screws included: 4 x #10 steel screws

  • Color: Silver
  • Brand: Electrodepot
  • ASIN: B07DPTSBM8
  • UPC: 705595756225

SIENOC RJ45 / 8P8C to Screw Terminal Breakout Board with DIN rail clips (RJ45 Terminal)

SIENOC RJ45 / 8P8C to Screw Terminal Breakout

Package Included: 1 x RJ45 to Screw Terminal 2 x DIN Rail Clips 4 x Screws

  • Brand: SIENOC
  • ASIN: B01NCJ1M66
  • UPC: 726325734832

DIN Rail Mounting Plates, 1.74" x 6.0" Plate Size, Solid, Black, RoHS Compliant

DIN Rail Mounting Plates, 1.74" x 6.0" Plate

Use these sturdy universal DIN rail mounting plates to mount devices to standard DIN rail. They feature a flat plate mounting surface to which you can mount your device, and a metal DIN rail bracket on the back of the plate secures the plate to the DIN rail. The mounting plate is made of sturdy 0.125" thick FR4 material (glass-reinforced epoxy laminate material). A sturdy steel DIN rail bracket comes installed on the back of the adapter plate. The steel bracket provides a secure installation while still allowing the plate to be easily removed from the DIN rail. This product features a solid plate.

  • Brand: Winford Engineering
  • ASIN: B07ND28K44
  • UPC: 703980527269

20 Pieces DIN Rail Slotted Aluminum RoHS 8" Inches Long 35mm Wide 7.5mm High

20 Pieces DIN Rail Slotted Aluminum RoHS 8"

35mm wide 7.5mm high aluminum RoHS Compliant slotted DIN rail. Due to center-to-center distance of mounting slots, rails may be 7.75" - 8" in length. Very sturdy rail!

  • Brand: T&G
  • ASIN: B01JH2RZWC
  • UPC: 737123112494

Erayco E/UK DIN Rail Terminal Blocks End Stopper Bracket Grey, Terminal Block Connector (Pack of 50)

Erayco E/UK DIN Rail Terminal Blocks End Stopper

Terminal fixed component mark clamp and marl strip could be blocked onto it to mark it, additionally, it could be used as fixed component to terminal row's termination

  • Brand: Erayco
  • ASIN: B07G4CKQSS

Electronics-Salon DIN Rail Mounting Carrier Housing with Prototype Board. PCB Size 137.4 x 72mm

Electronics-Salon DIN Rail Mounting Carrier Housing with Prototype

DIN Rail Mounting Carrier Housing with Prototype Board, for DIN Rail Projects DIY. Carrier Housing, for 35mm, 32mm or 15mm DIN rail. Size: L139.5mm x W87mm x H30mm / 5.5" x 3.42" x 1.18" PCB Dimension: 137.4 x 72mm / 5.41" x 2.83" PCB Thickness : 1.6mm. Material : FR-4 (glass fiber). All holes are plated through. Both sides are identical. PCB A~X and 01~24 connectors position pitch 5.0mm / 0.197", hole diameter 1.3mm. Other pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm.  

  • Brand: Electronics-Salon
  • ASIN: B017B6RCI8

35mm Aluminum Din Rail Fixed Screw Clamp Fasten Clip for Relay Mounting(#8)

35mm Aluminum Din Rail Fixed Screw Clamp Fasten

Specification: Material: Aluminum weight: Approx. 8-40g Options:  #1 20mm 3-hole frosted white #2 20mm 3-hole frosted black #3 35mm 2-hole #4 35mm 5-hole frosted white #5 35mm 5-hole frosted black #6 45mm 5-hole #7 80mm frosted #8 100mm frosted Package list: 1 * 35mm Din Rail Fixed Clamp

  • Brand: Wal front
  • ASIN: B07P12W481
  • UPC: 783335825189

Davitu single phase SSR 35MM DIN rail fixed solid state relay clip clamp with 2 mounting screws

Davitu single phase SSR 35MM DIN rail fixed

Metal PCB mounting adapter, DIN rail 35mm adapter, control board adapter  Type:MH-02 Material: Steel,  zinc plated Weight:50g Mounting method: DIN rail 35mm 4. The images shown are not the actual item and are for your reference only.5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit times may vary, particularly during the holiday season.7. Due to stock status and time differences, we will choose to ship your item from our first available warehouse for fast delivery. 1. You have 7 days to contact us and 30 days to return it from the date it was received. If this item is in your possession more than 7 days, it is considered used and WE WILL NOT ISSUE YOU A Item specifics:Model number: MH-02Product : FlowerMaterial : SteelMounting method : DIN rail mountingDin rail size : 35mmCoating : ZincWeight : 50gLength : 64.5mmWidth : 44.2mmHole size : 4mmProtection level : IP54

  • Brand: DAVITU
  • ASIN: B07LBYJJD2
  • UPC: 716991938900

10sets 35mm PCB DIN C45 Rail Adapter Circuit Board Mounting Bracket Holder Carrier DIY Electrical

10sets 35mm PCB DIN C45 Rail Adapter Circuit

Features: Fit for mounting DIN C45 rail mounting (width 35mm). Easy to install and detach. Made of high quality material, durable to use. The universal adapters are used to secure and hold PCB or electronic switching devices. 10 sets, each set include 1 bracket, 2 holders and 5 screws, enough to meet your basic need. Specifications: Model: KPRH-175 Quantity: 10sets Size: Approx. 42.6 x 10 x 19.3mm / 1.68 x 0.39 x 0.76in Weight: Approx. 126g Package Included: 10sets x PCB Bracket

  • Brand: FTVOGUE
  • ASIN: B07NY8LNC2
  • UPC: 783335862047

StarTech.com Adjustable Rackmount DIN Rail Kit with Top Hat/Mini/G Rails (ADJDINKIT)

StarTech.com Adjustable Rackmount DIN Rail Kit with Top

The ADJDINKIT Adjustable Rack Mount DIN Rail Kit with Top Hat/Mini/G Rails makes mounting your DIN-rail equipment in a 19-inch server rack/cabinet or wall plate simple, without wasting space due to special bracket requirements for each piece of equipment. This TAA compliant product adheres to the requirements of the US Federal Trade Agreements Act (TAA), allowing government GSA Schedule purchases. This 19-inch DIN Rail Mounting Kit includes the three most commonly used DIN rail systems: Top-Hat, Miniature Top-Hat, and G-Type. Backed by a StarTech.com Lifetime Warranty.

  • Color: Black
  • Brand: StarTech
  • ASIN: B003OCRW0W
  • UPC: 065030839266

Tripp Lite DIN Rail-Mounting Bracket for Digital Signage, Version 2-65 mm Mounting Distance (B110-DIN-02)

Tripp Lite DIN Rail-Mounting Bracket for Digital Signage,

Din mounting bracket ideal for attaching your digital signage components to a DIN rail This black aluminum DIN bracket is designed for securely mounting splitters, extenders and other select TRIPP LITE digital signage devices to any standard 35 mm DIN rail. Consisting of a durable U bracket and rail clip, the B110-DIN-02 firmly attaches to both lips of the DIN rail to prevent your mounted equipment from being jostled and connected cables from coming loose. It's an ideal accessory for setting up a digital signage system in restaurants, offices, banks, hotels, schools, doctor's offices and a wide range of Retail establishments.

  • Brand: Tripp Lite
  • ASIN: B07GX7ZXFQ
  • UPC: 037332213914
Similar Din Rail Clips Results
Din Rail Clips Video Reviews

Winford Engineering Nylon DIN Rail Brackets

Din Rail Clips

Overview of Winford Engineering's line of sturdy nylon DIN Rail mounting brackets -- Mount your p...

Tags: DIN clips,DIN Brackets,DIN Rail Clips

Assembly instruction DIN rail clip from Richard Wöhr GmbH

Din Rail Clips

The correct mounting of a DIN rail clip. You can find the product here: http://www.industriegeha...

Tags: Wöhr_GmbH,Wöhr,assembly_instruction,indurty,ind...

Laptop Powerwall 78 - DIN rail mounting bracket for 4x5 battery clips

Din Rail Clips

I'm building a 10kWh Powerwall from recycled laptop batteries. Here's a bracket for mounting a ...

Tags: DIY,Powerwall

How to Cut Din Rail- Innovative IDM

Din Rail Clips

Tags: Din,Rail,23,12

Installation tip: How to install the AXIS F8002 DIN Rail Clip for mounting on DIN rail in cabinet

Din Rail Clips

Video clip showing how to mount the AXIS F41 main unit using the optional accessory AXIS F8002 DI...

Tags: AXIS,Network Video,IP Video,Video Surveillance,...