Best Choice 40-Piece Tap and Die Set - SAE Inch Sizes | Essential Threading Tool with Storage Case

Best Choice 40-Piece Tap and Die Set -

EFFICERE 40-Piece Premium SAE Tap and Die Set is the perfect choice for your hand threading jobs at home, garage and shop. It can be used to either cut new threads or chase existing threads. This set is made from highly durable GCr15 bearing steel, and cuts through a wide range of metal pipes and rods including carbon steel, cast iron, stainless steel, aluminum, brass, copper and much more. All the cutting teeth are professionally CNC (computer numerical controlled) machined and heat treated to Rockwell hardness 60 HRC for providing aggressive, clean and precise threading results. The taps and dies also feature a tapered design, allowing an easier start and preventing over threading. Set Includes: (17) Taps; (17) Dies; (1) Long Handle Adjustable Tap Wrench; (1) T-Handle Tap Wrench; (1) Adjustable Die Wrench; (1) Mini 1/8" Flat Screwdriver; (1) Thread Pitch Gauge; (1) Heavy Duty Storage Case; Tap and Die Sizes: Coarse Thread (NC): 4-40 NC, 6-32 NC, 8-32 NC, 10-24 NC, 12-24 NC, 1/4-20 NC, 5/16-18 NC, 3/8-16 NC, 7/16-14 NC, 1/2-13 NC; Fine Thread (NF): 10-32 NF, 1/4-28 NF, 5/16-24 NF, 3/8-24 NF, 7/16-20 NF, 1/2-20 NF; Pipe Thread (NPT): 1/8 NPT 27;

  • Brand: EFFICERE
  • ASIN: B073YC3S8F
  • UPC: 858574007013

Grizzly G6811 3 Screw Die Stock, 1-1/2-Inch Diameter

Grizzly G6811 3 Screw Die Stock, 1-1/2-Inch

Screw type die stock securely holds round dies with three adjustable setscrews. Sized for round dies of the diameters listed.

  • Brand: Grizzly
  • ASIN: B0000DD5U3
  • UPC: 690550068119

GearWrench 114PC 82812 Ratcheting Tap and Die Drive Tool Set SAE/Metric

GearWrench 114PC 82812 Ratcheting Tap and Die Drive

  • Color: As shown in the picture
  • Brand: GearWrench
  • ASIN: B001GMVA64
  • UPC: 787721817901

Precision Brand Punch and Die Set

Precision Brand Punch and Die

Punch and Diet set is packaged in a durable plastic case. The base and punches are made of a hardened and ground A-2 tool steel. Mark center lines, align with center lines and hit with hammer.

  • Brand: Precision Brand
  • ASIN: B000LDG906
  • UPC: 698158401055

OMEX COMPLETE TAP AND DIE SET 0 - 10 BA TAP WRENCH DIE STOCK

OMEX COMPLETE TAP AND DIE SET 0 -

COMPLETE TAP AND DIE SET 0 - 10 BA MODEL ENGINEER BA TAP AND DIE SET SET CONSISTS OF 11 DIES 0-10BA SET OF 3 (START SECOND & BOTTOM) TAPS 0-10BA 13/16" CAPACITY DIE WRENCH AND SCREWDRIVER ALL DIES ARE SPLIT TYPE COMES COMPLETE IN FITTED BOX

  • Brand: AI
  • ASIN: B0762RCSRX

9 Piece Punch and Die Set

9 Piece Punch and Die

Made of precision ground hardened alloy steel, this punch set can power through 20 gauge sheet steel and 13 gauge aluminum and brass with ease. Accurate to within 0.002, this punch and die set includes a clear plate for easy alignment, nine punches, a 9-hole die and a custom storage case for easy organization and portability. The punches are 1/8, 3/16, 1/4, 5/16, 3/8, 7/16, 1/2, 5/8 and 3/4 in diameter.

  • Brand: Central Purchasing, LLC
  • ASIN: B006ZBCFDI
  • UPC: 792363955478

Neiko 00908A SAE and Metric Tap and Hexagon Die Set, Alloy Steel | 76-Piece Set

Neiko 00908A SAE and Metric Tap and Hexagon

Professional-grade quality, these pieces are forged with a base of special alloy steel that produces incredible strength without brittleness. A titanium-brazed coating ensures sharpness lasts up to twenty times longer than steel. Set includes the 20 most commonly-used tap-and-die Metric sizes, T-handle tap wrench, die adapter and set screw driver, die-stock handle wrench, adjustable tap handle wrench, die size-adapter and screw driver.

  • Brand: Neiko
  • ASIN: B000V5LAR6
  • UPC: 837013009085

Craftsman 75 pc Inch & Metric tap and die Set

Craftsman 75 pc Inch & Metric tap and

ThisCraftsman combination carbon steel sethelps you work with damaged nuts, bolts and threads. When a replacement bolt is hard to find, you can use this tap and die set to remove imperfections from threads. You'll be ready to take on any job with both inch and metric sizes. Combines inch and metric sizes in 1 convenient kit Set includes: 7 drive tools with accessories, 17 inch plug taps, 17 inch hex dies, 17 metric plug taps, 17 metric hex dies sturdy storage case with handle Hardened, precision-ground and polished carbon steel surfaces make chip removal easy Hex-shaped dies permit use of sockets and wrenches as well as die stocks Rust-resistant satin finish for smooth cuts with less friction

  • Brand: Craftsman
  • ASIN: B0036JK21Y
  • UPC: 787721707332

Factory Lathe Tailstock Floating Die Holder Set MT-2 - Multiple Die Holder for Threading in INCHES Round Dies

Factory Lathe Tailstock Floating Die Holder Set MT-2

Die Holders can Easily be Interchanged and comes with 4 Different Size Holders as : 1 The Die Holders Travels Smoothly over the Straight Shank. This Tailstock Die Holder Set Include tapered Shank & 4 size Of Die Holder Completely interchangeable.

  • Brand: Factory
  • ASIN: B07NVGKXJJ

Precision Brand TruPunch Punch and Die Set

Precision Brand TruPunch Punch and Die

Precision Brand TruPunch makes perfect, custom washers, shims, and gaskets in seconds by using its exclusive, patented punch, pilot, and pin system. No guess work is needed to center the I.D. and there is no need to scribe center lines. Material waste is reduced by creating a perfect shim every time. Packaged in a durable plastic case.

  • Brand: Precision Brand
  • ASIN: B00065UY8C
  • UPC: 698158401109

New 1/2"-28 Gunsmithing Die and Die Stock Combo 22LR 223 5.56 9mm

New 1/2"-28 Gunsmithing Die and Die Stock Combo

Package includes: 1x 1/2"-28 DIE; 1x DIE STOCK

  • Brand: MOTOKU
  • ASIN: B075YRCKMN

Gino Development 02-0444 TruePower Punch & Die Set (9 Piece)

Gino Development 02-0444 TruePower Punch & Die Set

Clear plate guide for easy alignment. Made from precision ground hardened alloy steel. Accurate to within 0.002". Includes nine punches: 1/8", 3/16", 1/4", 5/16", 3/8", 7/16", 1/2", 5/8" & 3/4". Capacities: 20 Gauge Steel Sheet, 13 Gauge Aluminum & Brass. Includes blow molded storage case. INITIAL ADJUSTMENT If you find the punches have a tight fit, are difficult to insert through the clear plate guide and cannot be moved by firm hand pressure, turn over the punch & die set and lightly tap each punch through the appropriate die from the tool steel plate toward the clear top. Always insert punches with the cutting edge first. The hammerhead should always squarely strike the punches on top of the beveled end. NEVER strike the cutting edge end of the punch with a hammer. Repeat this procedure several times until the fit becomes workable. Insertion of the punches will become easier after continued use. TO PUNCH A HOLE 1. Position the material to be punched between the tool steel base and the clear plate guide. 2. Before striking the punch, make sure the punch has been pushed through the clear plate guide and the cutting edge of the punch is touching the material. 3 Strike the beveled end of the punch squarely with the hammer face. Use enough force to penetrate the material with one b...

  • Brand: Gino Development
  • ASIN: B0010ZM6EW
  • UPC: 870208004441

ABN Titanium Tap and Hexagon Die Set Metric - 40 Piece

ABN Titanium Tap and Hexagon Die Set Metric

Finish metal threading and tapping while also chasing threads when they become damaged with the ABN Metric Tapping and Threading Die Set Screw Threader Set 40-Piece Kit. These thread taps and dies allow you to chase threads in a motorcycle case or even need to fix incorrect installation of electronics such as door locks. They restore threads of various sizes and are for both external and internal use so you can repair any type of threading by hand. Each piece is made of alloy steel with a titanium coating for light duty thread cleaning and chasing. This metric die set includes an adjustable tap wrench, die stock, screw pitch gauge, screwdriver, and taps and dies. Tap sizes range from M3 to M12 along with thread pitches from 0.5 mm to 1.75 mm. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.

  • Brand: ABN
  • ASIN: B01N4FTVCZ
  • UPC: 688295865117

Rasputin Lathe Tailstock Die Holder Set Of 4 Floating Type MT2 SHANK Holds Metric Die

Rasputin Lathe Tailstock Die Holder Set Of 4

Lathe Tailstock Die Holder Set Of 4 Floating Type MT2 SHANK Holds Metric Die. Shank Size MT2 Die Holder Sizes 20.6 MM 25 MM 30 MM 38 MM Ideal for cutting accurately aligned threads on lathe machine using standard dies. Holders are held on shank by a pin which fits in slot on either side of the holder allowing about 1-1/2" of Smooth travel. Set includes a punch of size 3/8" for easy removal of split button die.

  • Brand: Rasputin
  • ASIN: B07SGXCS4P

GearWrench 75PC 3887 Ratcheting Tap and Die Drive Tool Set SAE/Metric

GearWrench 75PC 3887 Ratcheting Tap and Die Drive

  • Color: silver
  • Brand: GearWrench
  • ASIN: B000HBDW48
  • UPC: 735090742393

LiBatter 2Pack 20V MAX 6.0Ah Lithium Ion Premium Battery for DEWALT DCB204 DCB205 DCB206 DCB205-2 DCB200 DCB180 DCD985B DCD771C2 DCS355D1 DCD790B

LiBatter 2Pack 20V MAX 6.0Ah Lithium Ion Premium

Battery Type: Li-ion Brand:LiBatter Voltage: 20V Capacity: 6000mAh Replacement Part#: Dewalt DCB200, DCB201, DCB201-2, DCB203, DCB180, DCB181, DCB181-XJ Compatible with: Dewalt DCD Series: DCD740, DCD740B, DCD780, DCD780B, DCD780C2, DCD780L2, DCD785C2, DCD785L2, DCD980L2, DCD980M2, DCD985B, DCD985L2, DCD985XR, DCD985L2, DCD785C2, DCD780C2, DCD780B, DCD740C1, DCD740B Dewalt DCF Series: DCF880C1-JP, DCF883B, DCF883L2, DCF885, DCF885B, DCF885C2, DCF885L2, DCF895B, DCF895C2, DCF895L2 DCF895L2, DCF895C2, DCF895B, DCF885L2, DCF885C2, DCF885B, DCF883L2, DCF883B, DCF880C1-JP, DCF883B Dewalt DCG Series: DCG412, DCG412B, DCG412L2 Dewalt DCS Series: DCS331B, DCS331L1, DCS331L2, DCS331N, DCS380B, DCS380L1, DCS381, DCS391B, DCS391L1, DCS393, DCS393, DCS391L2, DCS391L1, DCS391B, DCS381, DCS380L2, DCH214L2 Package Content: Battery x2How to fix common charge problem?Take you battery into charger, push harder and confirm the battery have to be clicked and seated all the way.

  • Color: 2 pack
  • Brand: LiBatter
  • ASIN: B07BLPXN9N

Lathe Tailstock Sliding Tap Die Holder MT3 Shank - Tapping Threading Reaming Drilling - 3MT

Lathe Tailstock Sliding Tap Die Holder MT3 Shank

A tailstock tap & die holder should be among the first accessories a machinist makes for his lathe, since threading with a hand-held die stock, or holding a tap in a collet is seldom satisfactory. This Tailstock Tap & Die Holder will cut threads with either a tap or a die using a hand held holder that slides on a tailstock mounted arbor. Releasing ones grip allows the tap or die to rotate on the arbor with the spindle. For larger threads that cannot be hand held a stop handle that bears against the lathe compound prevents rotation as the threads are cut The (10) pieces are as follows: 1.Tailstock Arbor with #3 Morse Taper, 5/8'' arbor diameter 2. Sliding Knurled Sleeve, 1'' diameter with 5/8'' thru bore 3. Small Tap Chuck 0 to 1/4 '' Tap capacity 4. Medium Tap Chuck 1/4" to 1/2" Tap capacity 5. Large Tap Chuck 1/2" to 3/4" 6. Small Die Holder - 13/16" Die Diameter 7. Large Die Holder - 1" Die Diameter 8.Large Die Holder - 1.1/2" Die Diameter 9. Threaded stop Handle, fits the sliding knurles sleeve 10. Allen keys The two tap chucks grip the tap by the taps square like inserting a tap in a hand held tap wrench. All small taps from #6 and under have the same size shank and square. So this tool will accommodate all taps #000 to 1/2." Tapping or die threading is relatively easy. As wi...

  • Brand: AI
  • ASIN: B07NRRGD3X

Bosch 4-1/2-Inch Angle Grinder 1375A

Bosch 4-1/2-Inch Angle Grinder

The Bosch 1375A 4-1/2 In. Angle Grinder features a powerful 6.0-amp motor that produces 11,000 no-load rpm, making this compact grinder a powerhouse tool. It was designed for concrete contractors, vehicle fabricators and other professionals who need a compact grinder. With a well-designed grip, lock-on slide switch, two-position side handle and 11,000 no-load rpm, this workhorse can get the job done. It is well suited for metal fabrication, concrete restoration, pipe fitting and more. It uses Service Minder brushes that stops the grinder when preventative maintenance is required and epoxy-coated field windings, for longer tool life. The lock-on slide switch, two-position side handle and 3.75 Lbs. weight add to user comfort and control.

  • Brand: Bosch
  • ASIN: B00004SUOU
  • UPC: 043978998924

Performance Tool W4002DB 40-Piece Metric Tap And Die Set

Performance Tool W4002DB 40-Piece Metric Tap And Die

NC, NF and NPT sizes. Includes 17 taps and 17 dies, Tap wrench, T-handle tap wrench, die stock, screwdriver and screw pitch gauge, and storage case. Also Includes: tap wrench, T-handle tap trench, die stock, screwdriver, screw pitch gauge, blow molded storage case. Sizes: 1/8-Inch PT, M3 x 0.5, M3 x 0.6, M4 x 0.7, M5 x 0.8, M5 x 0.9, M6 x 0.75, M6 x 1.0, M7 x 0.75, M7 x 1.0, M8 x 1.0, M8 x 1.25, M10 x 1.25, M10 x 1.5, M12 x 1.5 and M12 x 1.75.

  • Color: Silver
  • Brand: Performance Tool
  • ASIN: B000N322BE
  • UPC: 039564156038

TEKTON 7559 Tap and Die Set, Metric, 39-Piece

TEKTON 7559 Tap and Die Set, Metric,

  • Brand: TEKTON
  • ASIN: B00AHV3DWY
  • UPC: 020209075593
Similar Die Stock Set Results
Die Stock Set Video Reviews

Cutting an External Thread using Die & Die Stock

Die Stock Set

Cutting an external thread - (N.B. Die inverted in stock to give clearer view of thread as it is ...

Tags: Thread cyrring,dies,die,die-stock,DTOTW,diplocr...

How to Cut Threads with a Tap & Die Set

Die Stock Set

Making an axle for the cart of my new Welder/Generator... We did all this with scrap metal and le...

Tags: how to cut threads,how to,Tap And Die,Threading...

How to use a die (Machinist Video)

Die Stock Set

My first machinist type of video. Like the video if you want more of these!

Tags: LEGO,Star,Wars,WW2,BrickArms,Review,Overview,Cu...

Using Stock & Dies

Die Stock Set

Tags:

Harbor Freight Punch & Die Set Review

Die Stock Set

Here's a review of The Harbor Freight 95547 sheet metal punch and die set

Tags: