Bosch Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter RA1054

Bosch Deluxe Router Edge Guide With Dust Extraction

The Bosch RA1054 Deluxe Router Guide greatly expands the versatility of Bosch routers. It makes it possible to do edge-forming using non-piloted bits, and guides cuts along the workpiece edge or up to 8 inches from the edge. Standard equipment includes dust extraction hood and vacuum hose adapter that allows connection to 1-1/4-inch, 1-1/2-inch and 35mm hoses.

  • Color: Black
  • Brand: Bosch
  • ASIN: B00005RHPP
  • UPC: 000346313208

Taytools 300015 Deluxe 32" Long Router Table Fence 3-1/2" Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port

Taytools 300015 Deluxe 32" Long Router Table Fence

This deluxe router table fence will introduce a new level of accuracy and cleanliness to any shop. This deluxe router table fence is made from 3/8 inch thick precision extruded anodized aluminum that will stay straight and true when humidity changes. It measures a full 3-1/2 inches tall and 3-1/2 inches wide. Rear-mounted 4-1/2 inch tall adjustment knobs make it easy to adjust the fence back and forth. Spacing range for adjustment knobs is 18-1/2 to 22-1/4 inches. The fence faces are made from smooth melamine coated MDF. The fence opening can be adjusted by way of 4 rear mounted threaded knobs. The fence opening can accommodate bits up to 3-1/2 inches in diameter. The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face. T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop. Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening. Table and router not included.

  • Brand: Taytools
  • ASIN: B07BZDHY1S
  • UPC: 700667470030

24" Deluxe Router Table Fence by Peachtree Woodworking PW3318

24" Deluxe Router Table Fence by Peachtree Woodworking

The Deluxe Router Table fence kit is two MDF fence plates supported by a solid aluminum "L" fence with built in track will comfortably accommodate router bits up to 3-1/2 in diameter and comes with all the necessary parts for quick and simple assembly. The system is also equipped with a dust port that envelopes the opening between the two MDF fence sections. The mounting fence has a unique shim system; each side of the fence can be shimmed with an aluminum bar that is inserted into offset tracks of varying depth, which in turn nudges your fence forward to the desired depth. Tall adjustment knobs allow easy access for moving your fence forward and backward. This system is available in a 24" or 32" length. Table not included.

  • Brand: Peachtree Woodworking
  • ASIN: B00405ZZ5Q
  • UPC: 810948015420

Taytools 300016 Deluxe 24" Long Router Table Fence 3-1/2" Tall Anodized Aluminum with Feather Board, Bit Guard, Adjustable Stop and Dust Port

Taytools 300016 Deluxe 24" Long Router Table Fence

This deluxe router table fence will introduce a new level of accuracy and cleanliness to any shop. This deluxe router table fence is made from 3/8 inch thick precision extruded anodized aluminum that will stay straight and true when humidity changes. It measures a full 3-1/2 inches tall and 3-1/2 inches wide. Rear-mounted 4-1/2 inch tall adjustment knobs make it easy to adjust the fence back and forth. Spacing range for adjustment knobs is 18-1/4 to 22-1/4 inches. The fence faces are made from smooth melamine coated MDF. The fence opening can be adjusted by way of 4 rear mounted threaded knobs. The fence opening can accommodate bits up to 3-1/2 inches in diameter. The outfeed fence face can be shimmed out either 1/32 inch or 1/16 inch by way of a brilliant shim system where 2 square aluminum bars are slid into one of 2 sets of offset tracks in the fence face. T tracks on the top and front accommodate a wide range of accessories. Comes equipped with a bit guard, feather board and adjustable stop. Has a Dust port with 2-1/2 inch OD and 2-1/4 inch ID opening. Table and router not included.

  • Brand: Taytools
  • ASIN: B07CBMWDCN
  • UPC: 700667470047

32" Deluxe Router Table Fence by Peachtree Woodworking PW3319

32" Deluxe Router Table Fence by Peachtree Woodworking

The Deluxe Router Table fence kit is two MDF fence plates supported by a solid aluminum "L" fence with built in track will comfortably accommodate router bits up to 3-1/2 in diameter and comes with all the necessary parts for quick and simple assembly. The system is also equipped with a dust port that envelopes the opening between the two MDF fence sections. The mounting fence has a unique shim system; each side of the fence can be shimmed with an aluminum bar that is inserted into offset tracks of varying depth, which in turn nudges your fence forward to the desired depth. Tall adjustment knobs allow easy access for moving your fence forward and backward. This system is available in a 24" or 32" length. Table not included.

  • Brand: Peachtree Woodworking
  • ASIN: B00405ZZ8I
  • UPC: 810948015437

WoodRiver Clamp Guide Universal Base for Routers and Circular Saws

WoodRiver Clamp Guide Universal Base for Routers and

This WoodRiver Clamp Guide Universal Base slides accurately in the T-slot found on all WoodRiver Clamp Guides and WoodRiver Guide Rail . Perfect for mounting your circular saw or router to create a precision power tool accessory.

  • Brand: WOODRIVER
  • ASIN: B0035Y9HT8
  • UPC: 844788003569

Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate

Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe

Able to accommodate the heaviest routers, this thermoset 3/8-inch base plate measures 9 by 12-inches with a 1/4-by-1/2-inch lip, and allows mounting in 3/4-inch tops. Two rings snap out to accommodate larger router bits up to 3-3/4-inches with opening sizes of 1-1/4 (designed to fit template guides), 2-5/8, and 3-7/8-inches. The shoulder pin can be used in any of five locations for ease in starting freehand work.

  • Brand: Rousseau
  • ASIN: B00002242B
  • UPC: 725825350900

XtremepowerUS Deluxe Bench Top Aluminum Electric Router Table Wood Working On/Off Swtich Craft DIY Benchtop (34" x 13") -Black

XtremepowerUS Deluxe Bench Top Aluminum Electric Router Table

Our router working table which is a versatile, affordable item for every wood worker. Whether you are outfitting your home garage or you are designing a workshop for your full-time business, this router table is a great option. The table holds the router securely, leaving your free to keep both hands on the table during the cut. You can work both safely and efficiently. The heavy duty aluminum construction will provide long-lasting use.Features:Router working table which is a versatile, affordable item for every wood worker2-1/2"-inch Dust Collection port fits your wet/dry vacuum and keeps work area cleanUnique solid design is multifunctional and equipped with built-in guardTable offers built-in scale for quick and accurate indexingMaster Power Switch located in the front of the router. (Router Trigger Can Be Reach Easier)Built in Scale for quick and accurate indexingPush Out Pocket Fence adds jointing capabilities to straighten board edgesLightweight, yet strong. Grooved Surface keeps dust and chips away from work placeSpecifications:Color: BlackMaterial: Aluminum, SteelVoltage: 115Power Switch: On/OffDust Port: 2-1/2"Miter Gauge: YesBase Plate: 6" DiameterRouter Included: NoBit Included: NoOverall Dimension: 17-3/4"(W) x 13"(L) x 11"(H)Package Contents:Electric Router Table

  • Color: Black
  • Brand: XtremepowerUS
  • ASIN: B00MJLSJQU
  • UPC: 602589752082

POWERTEC 71005 Deluxe Table Saw Miter Gauge

POWERTEC 71005 Deluxe Table Saw Miter

The POWERTEC 71005 Deluxe table saw miter gauge features a generously designed grip, for comfort and strength, giving the user ease and control and designed for superior accuracy. The gauge made to fit miter grooves measuring 3/8 by 3/4 inch, includes an adjustable guide bar for easy fit into tight tolerance miter slots. The miter gauge has positive stops at all common angles. A washer is included to prevent tipping when the gague is Extended over work surface edges.

  • Brand: POWERTEC
  • ASIN: B00GBFKOH2
  • UPC: 736815005366

Gripper(TM) Deluxe Package - 2 pack

Gripper(TM) Deluxe Package - 2

3-Directional Force for total control of the workpiece Moving-Blade-Guard Hand protection Precise 1/4" thin rips Virtually eliminates kickback Work with small stock safely

  • Brand: MICRO JIG
  • ASIN: B000H50B9S
  • UPC: 810948013310

PORTER-CABLE 557 7 Amp Plate Joiner Kit

PORTER-CABLE 557 7 Amp Plate Joiner

  • Color: Grey
  • Brand: PORTER-CABLE
  • ASIN: B00004YKUO
  • UPC: 642008627843

DEWALT DW682K 6.5 Amp Plate Joiner

DEWALT DW682K 6.5 Amp Plate

  • Color: Black & Yellow
  • Brand: DEWALT
  • ASIN: B00002232S
  • UPC: 784497274532

DELTA Deluxe Miter Gauge

DELTA Deluxe Miter

Genuine Original Equipment Manufacturer (OEM) parts! This miter gauge assembly (part number 34-929) is for table saws. Miter gauge assembly 34-929 guides the work piece as it's being cut. The assembly may include multiple parts; refer to your parts diagram for a complete list of parts included. Follow the instructions in the owner's manual when installing this part. For Delta.

  • Color: Black
  • Brand: Delta
  • ASIN: B00I33XUKS
  • UPC: 847962005199

Incra MITERV27 Miter V27 Miter Gauge

Incra MITERV27 Miter V27 Miter

  • Brand: INCRA
  • ASIN: B0007UQ2DW
  • UPC: 784497088863

PORTER-CABLE 4212 12-Inch Deluxe Dovetail Jig

PORTER-CABLE 4212 12-Inch Deluxe Dovetail

Ideal for woodworking, furniture and cabinet making, the Porter Cable 4212 12-inch dovetail jig kit enables cutting a wide variety of joinery for drawers, boxes, and furniture. This package includes a template 4211 for half-blind, rabbeted half-blind and sliding dovetails and the 4213 template for through dovetails and box joints. Durable, single-piece steel base design requires no assembly (view larger). Able to accommodate stock from 1/4 to 1-1/8 inches thick, this jig's heavy-duty cam-type clamps with sandpaper-backed locking bars provide a firm grip of wood. On-board instructions provide clear user guidance for the various applications and machined aluminum templates provide superior cutting accuracy and long-term durability. Its router bit depth gauge allows users to set bit depths without measuring and its durable, single-piece steel base design requires no assembly and allows clamping or bolting directly to the work bench. Warranty This Porter-Cable tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by Porter-Cable's one-year free service contract, where Porter-Cable will maintain the tool and replace worn parts caused by normal use--for free. What's in the Box Porter...

  • Color: Silver
  • Brand: PORTER-CABLE
  • ASIN: B0006AAS8S
  • UPC: 733353472964

Makita PJ7000 Plate Joiner

Makita PJ7000 Plate

'Plate Joiner, Depth of Cut (In.) 25/32 In., 5.6 A Amps @ 120V, Tilting Angle (Deg.) 90, No Load RPM 11000, Bearings Ball, Features Tool-less Blade Cover, Six Depth Settings,, Overall Length (In.) 123/32 In., Tool Weight (Lb.) 6.5 lb., Includes Dust Bag, Case, Wrench, Blade'

  • Color: Blue
  • Brand: Makita
  • ASIN: B00608ZTD4
  • UPC: 718472156490

DELUXE ROUTER TABLE FENCE KIT by Peachtree Woodworking - PW1072

DELUXE ROUTER TABLE FENCE KIT by Peachtree Woodworking

The Deluxe Router Table Fence Kit works on any table top with a center mount router plate system. The solid MDF backer boards have Mini T-track built in for mounting and placing featherboards and stop blocks on the front of the fence, as well as a back side mini-T-track for mounting to the aluminum "L" fence.

  • Brand: Peachtree Woodworking
  • ASIN: B00153LKRS
  • UPC: 810948016762

Shop Fox W1671 3/4 HP Heavy-duty Mortising Machine

Shop Fox W1671 3/4 HP Heavy-duty Mortising

This king of benchtop mortisers is a rugged, high-quality machine with all the features found in the best mortisers, but with none of their faults. The super heavy-duty fence and hold down eliminate unwanted wood movement and "sticking chisels," (an all too common complaint with all mortisers), ensuring accurate and fast operation. The unique swiveling base allows easy off-the-bench operations and opens new possibilities for custom mortises. The precision 1/2" chuck eliminates the need to modify chisels and bits, and the extra height capacity allows the use of stock up to 7-3/8" thick. The all-steel, quick-adjust depth stop is easy to set and designed with a positive stop mechanism to ensure the highest level of repeatable accuracy for repeatable operations. With features like an adjustable length, solid-steel, quick-positioning handle, 8-piece tool holder, easy two-door chuck access, large base, and twin hardened-and-ground columns, you'll see why this is one of the most popular mortising machines on the market! Motor: 3/4 HP, 110V, single-phase, 3450 RPM, aluminum finned for years of trouble free service Mortise to the center of an 8" wide board Mortise lumber to 7-3/8" thick Table size: 6" x 16" Heavy cast iron construction Includes 1/2" chisel Approximate shipping weig...

  • Brand: Shop Fox
  • ASIN: B000J0UTL6
  • UPC: 754001016712

iGaging 35-0928 Digital Saw Gauge

iGaging 35-0928 Digital Saw

Designed for completing numerous tests in your shop, this digital alignment tool will allow you to test your table saw alignment, fence alignment, saw, router and drill press arbor run out, set jointer knives, saw blade run out and much more. The Digi Align provides accurate measurements on any steel (cast iron) machine with a standard miter slot (3/8 Inch x 3/4 Inch). The magnetic miter bar holds the tool tight against the edge of the miter slot, while still allowing for sliding movement up and down the miter slot to check fence alignment to miter slot or saw blade to miter slot. The easy to read, 3 way digital indicator gives you readings in metric, inch or fractional increments. It has a 1 Inch range, will read to within 0.0005 Inch and features both an ABS Hold function and a data output for your computer. The indicator has a 3/8 Inch hole on the back mount and can be used with all alignment tools such as height gauges and magnetic base holders that use a standard dial indicator. Battery included.

  • Color: Silver
  • Brand: iGaging
  • ASIN: B00AQGLB1K
  • UPC: 733175345934

INCRA MiterV120 Miter Gauge

INCRA MiterV120 Miter

The Miter V120 from INCRA has the precision of a higher price-point miter gauge while offering a price that makes it an affordable upgrade to your stock miter gauge. 120 AngleLOCK Indexing Stops. 1 Degree Stop Spacing with Special Stops at +/- 22-1/2 degrees. Patented GlideLOCK Miter Bar Expansion Disks Provide a perfect fit. Removable retaining clip for T-Slot miter channels. All steel machined and laser cut components.

  • Brand: INCRA
  • ASIN: B001RCTTG6
  • UPC: 784497072305
Similar Deluxe Router Fence Results
Deluxe Router Fence Video Reviews

New Yankee Workshop S15E01 Deluxe Router Station

Deluxe Router Fence

New Yankee Workshop S15E01 Deluxe Router Station

Tags: new,yankee,workshop,s15e01,deluxe,router,station

What To Look For In Router Table Fences WWW17 WOOD magazine

Deluxe Router Fence

In this tool review, learn what to look for when shopping for router table fences. Ripped from W...

Tags: WOOD magazine,woodworking,how-to,project,plan,c...

Universal Router Table Fence

Deluxe Router Fence

Buy the Katz-Moses Magnetic Dovetail Jig: https://goo.gl/XzEmMa A woodworking router table build ...

Tags: woodworking,router table,router,router table fe...

Router Table Overview

Deluxe Router Fence

Overview of my router table with Incra LS Super System positioning system, Porter Cable 7518 Rout...

Tags: router table build,build a router table,build a...

How to Make The Ultimate Router Table with all the Accessories.

Deluxe Router Fence

Build the dream router table with all the bells and whistles! With all the router table accessori...

Tags: router table,woodworking,router,table,how to,sh...