Hydraulic Clutch Pedal Kit, Swing Mount

Hydraulic Clutch Pedal Kit, Swing

Speedway 3/4" small master cylinder w/ 3/8"-24 IFF outlet fittingSpeedway pull-type slave cylinder w/ 3/8"-24 IFF inlet fitting 5/16" RH female heim7:1 ratio Wilwood swing mount clutch pedal

  • Brand: Speedway Motors
  • ASIN: B07JDWTCR8

HDE 3 Piece Non Slip Pedal Kit Gas Clutch Brake Cover Pads for Manual Transmission Vehicles (Chrome and Black)

HDE 3 Piece Non Slip Pedal Kit Gas

Did you just get a new car? Maybe you want to spice up your old car? This silver and black pedal kit is designed for manual transmissions, and will allow you to add some flare to the driver's side!

  • Color: chrome
  • Brand: HDE
  • ASIN: B009D04QX0
  • UPC: 797734244748

Southwest Speed NEW SINGLE FLOOR MOUNT CLUTCH OR BRAKE PEDAL WITH MASTER CYLINDER

Southwest Speed NEW SINGLE FLOOR MOUNT CLUTCH OR

Brand New Forward Floor Mount Clutch Pedal Combo With 1 Aluminum Master Cylinder (SWS Part # 301-2571). This kit is made by Southwest Speed. Kit includes: 1 - Forward floor mount clutch pedal (SWS Part # 301-257) Pedal features all aluminum frame and arm construction with steel pivots, mounting studs, and an anti-skid pedal pad 1 - Girling-style aluminum clutch master cylinder, 3/4" bore (SWS Part # 290-412) Lightweight all aluminum construction Perfect for all almost all clutch applications 1 - Girling master cylinder fitting to get to 3/16" line (SWS Part # 301-088) 3/8"-24 Bulb flare to 3/16" line Diagram of Clutch Pedal (Shown in the Images)

  • Color: Floor Mount Pedal With Master Cylinder
  • Brand: Southwest Speed
  • ASIN: B00RKGEZOY

Hotwin 2pcs Brake And Clutch Pedal Pad Kit 52002750 Compatible with Jeep Wrangler YJ TJ Cherokee XJ 16753.03

Hotwin 2pcs Brake And Clutch Pedal Pad Kit

▶Hotwin 2pcs Brake And Clutch Pedal Pad Kit 52002750 Compatible with Jeep Wrangler YJ TJ Cherokee XJ 16753.03 ▶Condition: Brand new and high quality Brake And Clutch Pedal Pad Kit.▶Part number: 52002750 / 20780 /16753.03; Please check the part number and pictures to verify this is the part you need. ▶Compatibility(Please check your part number and the photo to make sure this is the correct part for you): Jeep1987-2006 Wrangler TJ LJ 1987-2001 Cherokee XJ. ▶Shipping from USA, Fast Shipping (usually 4-6 working days) and Good Service.▶Built to strict quality control standards, Any issue, please sent us message.

  • Brand: Hotwin
  • ASIN: B07JWHP4P9
  • UPC: 725732852818

Astra Depot Red Black Chrome Anti-Slip Manual Brake + Gas + Clutch Foot Pedal Pad Covers Kit

Astra Depot Red Black Chrome Anti-Slip Manual Brake

Specifications: Condition: 100% Brand New Package included:    » 1X Gas Pedal Cover    » 1X Clutch Pedal Cover    » 1X Brake Pedal Cover    » Set of Screws and Nuts Size:    » Gas Pedal Cover: 5" x 2 19/32" (12.7cm x 6.6cm)    » Clutch Pedal Cover: 3 15/64" x 3 5/32" (8.2cm x 8cm)    » Brake Pedal Cover:3 15/64" x 3 5/32" (8.2cm x 8cm) (As the Picture Shown) Color: Chrome + Black + Red Material: High Quality ABS Weight: 205g Feature: Bring Unique Apprearance for Your Plain Factory Pedals Made of High Quality ABS and Chrome Finished Surface. Perfect For Manual Transmission Car With Non-Slip Surface Clamp Over The Origin Pedal, Enlarge The Area Safe For Driving and Reduce Foot Fatigue. Easy Installation, No Drilling or Welding Required. Fitment: Fit For Most Manual Transmission Car How To Install : 1. Fit straps with screws and nuts on each pedal cover. 2. Places the pedal cover in the correct position to fold the straps around the original pedals. 3. Check if the straps can be folded around the pedals. * Note: * Please read all description & size before ordering the product. * All of our packages are shipped from Hong Kong, and it normally takes 7-20 business days to receive * Your satisfaction is our utmost ...

  • Color: Red
  • Brand: Astra Depot
  • ASIN: B00TGQFSTW

Astra Depot 3 in 1 Kit Non-Slip Manual Brake + Gas + Clutch Foot Pedal Pad Cover for Honda Nissan Scion Subaru Toyota

Astra Depot 3 in 1 Kit Non-Slip Manual

Specifications: Condition: 100% Brand New Package included:    » 1X Gas Pedal Cover    » 1X Clutch Pedal Cover    » 1X Brake Pedal Cover    » Set of Screws and Nuts Size:    » Gas Pedal Cover: 5" x 2 19/32" (12.7cm x 6.6cm)    » Clutch Pedal Cover: 3 15/64" x 3 5/32" (8.2cm x 8cm)    » Brake Pedal Cover:3 15/64" x 3 5/32" (8.2cm x 8cm) (As the Picture Shown) Color: Chrome + Black + Red Material: High Quality ABS Weight: 205g Feature: Bring Unique Apprearance for Your Plain Factory Pedals Made of High Quality ABS and Chrome Finished Surface. Perfect For Manual Transmission Car With Non-Slip Surface Clamp Over The Origin Pedal, Enlarge The Area Safe For Driving and Reduce Foot Fatigue. Easy Installation, No Drilling or Welding Required. Fitment: Fit For Most Manual Transmission Car How To Install : 1. Fit straps with screws and nuts on each pedal cover. 2. Places the pedal cover in the correct position to fold the straps around the original pedals. 3. Check if the straps can be folded around the pedals. * Note: * Please read all description & size before ordering the product. * All of our packages are shipped from Hong Kong, and it normally takes 7-20 business days to receive * Your satisfaction is our utmost ...

  • Color: red
  • Brand: Astra Depot
  • ASIN: B00TGQKP0E

Orion Motor Tech Ford Clutch Pedal Fix, Clutch Rod End Bushing Eliminator Compatible with 1987-1997 Ford F150, F250, F350, F450, F550 Powerstroke, Super Duty, Bronco Heim Joint Mod

Orion Motor Tech Ford Clutch Pedal Fix, Clutch

Why you need this part: - The "heim joint mod" for Old Ford pickups equipped with the ZF 5 speed manual transmission eliminates problems associated with the infamous plastic "Mickey Mouse" bushing located in the eye of the clutch master cylinder pushrod. The plastic bushing is notorious for wearing down and/or cracking, allowing for excessive play between the pushrod and clutch pedal swing arm. In extreme cases where the problem is not addressed promptly, the eye of the pushrod can actually begin to eat away the pin on the end of the swing arm. Ultimately, this connection is the source of poor shift quality, grinding gears, and the seemingly endless need for more clutch throw. - The heim joint mod for Power Stroke and IDI diesels replaces the factory pushrod eye and swing arm pin with a rod end joint and high strength cap screw, creating a tight connection that will never wear out. You'll be amazed at how such a simple modification can greatly improve clutch feel. Fitment: 1988-1998 Ford F-150, F-250, F-350, F-450, F-550 Powerstroke, Super Duty, Bronco. - Installation Video --- https://youtu.be/6C75oQNNows Attention: - You need to cut off your vehicle clutch rod ring part - Follow installation video to finish your work, no instructions. Installation Tool (you will need): - Hacksa...

  • Brand: OrionMotorTech
  • ASIN: B077GNRNXT

EXEDY HCK1001 OEM Replacement Clutch Kit

EXEDY HCK1001 OEM Replacement Clutch

EXEDY Globalparts Corporation (USA) is a wholly owned subsidiary of the EXEDY Corporation of Japan. EXEDY (Japan) was founded in 1923 and its clutch manufacturing business and prominent brand name Daikin Clutch are known throughout the world for supplying quality powertrain products. Our pursuit of perfection and the assurance of safety underlie our famed quality and reliability. Our advanced engineering and patented innovations have made us the leading OEM manufacturer in the world for Clutches and other powertrain components.Exedy is also the undisputed leader of performance sports and racing clutches.

  • Brand: Exedy
  • ASIN: B001B5EBX0
  • UPC: 651099108858

Empi 16-2549-0 Clutch Slave Kit for Sand Rail Buggy and Off-Road

Empi 16-2549-0 Clutch Slave Kit for Sand Rail

Race-trim clutch slave cylinderRacetrim Slave Cylinder Pull Style

  • Brand: Empi
  • ASIN: B004C3DWCE
  • UPC: 707924411164

Permanent Clutch Rod Fix Repair Kit Compatible with Ford Powerstroke Super Duty

Permanent Clutch Rod Fix Repair Kit Compatible with

* 1 kit - as seen in photos * Instructions not included. Permanent Clutch Rod, fix/repair!! Compatible with Ford POWERSTROKE, SUPER DUTY, BRONCO FORD Clutch Rod - PERMANENT FIX/REPAIR!! Compatible with Ford 1988-1998, 1999-2010: F150, F250, F350, F450, F550 POWERSTROKE, SUPER DUTY, BRONCO. Permanent fix/repair kit for the worn-out rod end plastic bushing and/or clutch lever pin. This will tighten up your clutch pedal. Works by installing an "all steel, zinc plated" self-aligning heim joint - In place of your worn out "plastic bushing" rod end.

  • Brand: Diesel Destruction
  • ASIN: B079H4DPMP
Similar Clutch Pedal Kit Results
Clutch Pedal Kit Video Reviews

Wilwood Clutch and Brake Pedal Conversion - Firewall Mount Triple Master Cylinder Assembly

Clutch Pedal Kit

The manual shift conversion on the 1973 Mustang takes a giant step forward with the installation ...

Tags: custom,brakes,pedals,manual conversion,wilwood,...

Wilwood Tandem Brake & Clutch Pedal Kit - PRI 2017

Clutch Pedal Kit

Wilwood at https://www.carid.com/ : https://goo.gl/x74k7G If you need a new brake set up for you...

Tags: Wilwood,Wilwood Brakes,Brakes,Disc Brakes,Brake...

Lingenfelter Clutch Pedal Return Spring kit - C5 Corvette

Clutch Pedal Kit

Installation and review of the Lingenfelter Performance Clutch Pedal Return Spring kit. C5 Corve...

Tags: c5,corvette,chevy,chevrolet,c6,c7,mustang,miata...

Mustang Classic Car Clutch Pedal Support Replacement Episode 158 Autorestomod

Clutch Pedal Kit

We show how to rebuild and install the clutch pedal assembly on a 1965 or 1966 Mustang. We also s...

Tags: Autorestomod,How-to,How to,Do It Your Self,DIY,...

PRI 2017 Preview: Wilwood Tandem Brake & Clutch Pedal Kit

Clutch Pedal Kit

If you need a new brake set up for your ride, give us a call at (805) 388-1188 or visit our websi...

Tags: wilwood,will wood,wil wood,brake,brakes,disc,di...