LEE PRECISION 90672, 6 Cavity Bullet Mold.35 Caliber (.356" Diameter), 95 Grains, Flat Nose

LEE PRECISION 90672, 6 Cavity Bullet Mold.35 Caliber

Designed for volume production, the Lee 6-cavity bullet mold blocks are machined from commercial quality aluminum and feature steel Bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-cavity molds come with a Cam operated, hard-anodized sprue plate which is held tightly with Tempered spring washers at each end. Weights given are Lee weights with suggested alloy; actual weight may Vary due to alloy mixture used. Handles are not included (#117-892). features: - rust resistant aluminum blocks - lathe bored blocks with steel bushings and alignment pins. Specifications: - material: aluminum - capacity: 6 - diameter: 0.356 inch - bullet style: flat nose - handle included: no - gas check: no - bullet weight: 95 grains - mold caliber: 35 caliber/9mm

  • Color: Silver
  • Brand: LEE PRECISION
  • ASIN: B00N33Y3D6
  • UPC: 734307906726

LEE PRECISION 358-125-Rf 6 Cavity Bullet

LEE PRECISION 358-125-Rf 6 Cavity

Lee Six Cavity Mold produces a .358 diameter 125 grain round nose bullet suitable for cartridges like 38 Special, 38 S and W, 38 Colt New Police, 357 mag, etc. Bullet Mold lube and handles sold separately. Ballistic Coefficient = .116 Bullet Overall Length = .540 inches. Distance from theCrimping groove to the nose of the bullet = .275 inches.

  • Brand: LEE PRECISION
  • ASIN: B008M5TSBW
  • UPC: 734307903060

Lyman, Black Powder Mould.50 Caliber, 395 Grains

Lyman, Black Powder Mould.50 Caliber, 395

Lyman 1-Cavity Bullet Molds are made from solid leaded-steel and machined to an exact and smooth super fine finish. The molds are then heat treated (that is why they are blue in color) and feature hardened steel alignment pins to provide many years of bullet casting service. Sprue plates are made from solid steel, ground flat and held tightly in place with tempered steel spring washers and screws. In addition, break-in is often half the time required for iron molds. Mold handles are not included. Hardwood Handles are not included and must be purchased separately. Weight given are Lyman's weights with suggested alloy; actual weight may vary due to alloy mixture used. Specifications: - Material: Steel - Capacity: 1 - Diameter: 0. 508" - Bullet Style: Plains - Handle Included: No - Gas Check: No - Bullet Weight: 395 Grains - Mold Caliber: 50 Caliber

  • Color: Unknown
  • Brand: Lyman
  • ASIN: B005I0L07O
  • UPC: 011516246561

LEE PRECISION 90690, 6 Cavity Bullet Mold.40 Smith & Wesson (.401" Diameter), 175 Grains, Truncated Cone

LEE PRECISION 90690, 6 Cavity Bullet Mold.40 Smith

Designed for volume production, the Lee 6-cavity bullet mold blocks are machined from commercial quality aluminum and feature steel Bushing and alignment pins. Lee mold blocks are machined from aluminum blocks making them rust resistant. Aluminum molds heat up and cool down faster than iron or steel molds so good bullets can usually be produced after only a few casts. In addition, they are one-third the weight of iron or steel mold blocks for less fatigue during extended casting sessions. To ensure the best possible bullets, mold block halves are CNC machined for unmatched roundness and size control. Lee 6-cavity molds come with a Cam operated, hard-anodized sprue plate which is held tightly with Tempered spring washers at each end. Weights given are Lee weights with suggested alloy; actual weight may Vary due to alloy mixture used. Handles are not included (#117-892). Lee Precision does not recommend the use of any spray type mold release products in their bullet molds. The use of such products may result in a build-up of the release product in the bullet mold cavity, reducing the diameter of the bullets cast from the treated mold. Instead, Lee Precision recommends smoking the mold with a wooden match, beeswax candle or a butane lighter as described in their provided bullet mold...

  • Brand: LEE PRECISION
  • ASIN: B0067SPLDK
  • UPC: 734307906900

LEE PRECISION Tl358-158Swc 6 Cavity Bullet

LEE PRECISION Tl358-158Swc 6 Cavity

Lee 6 Cavity Bullet block produces a .358 diameter 158 grain Semi Wad Cutter nose bullet suitable for cartridges like 38 Special, 38 S and W, 38 Colt New Police, 357 Mag. Bullet Mold lube and handles sold separately. Bullet Coefficient .117. Bullet Overall Length = .665 inches. Distance from bullet nose to the top edge of the first driving ring = .275 inches.

  • Brand: LEE PRECISION
  • ASIN: B005KW707Y
  • UPC: 734307902957

LEE PRECISION 457-340-F Double Cavity Mold

LEE PRECISION 457-340-F Double Cavity

Lee Double Cavity Mold produces a .457 diameter 340 grain Flat nose bullet suitable for cartridges like 45-70 Caliber Rifle.

  • Brand: LEE PRECISION
  • ASIN: B001TQ3PO2
  • UPC: 734307903732

Lyman, Pistol Bullet Mould.44 Caliber, 245 Grains

Lyman, Pistol Bullet Mould.44 Caliber, 245

Lyman Bullet Molds are made from solid leaded-steel and machined to an exact and smooth super fine finish. The molds are then heat treated (that is why they are blue in color) and feature hardened steel alignment pins to provide many years of bullet casting service. Sprue plates are made from solid steel, ground flat and held tightly in place with tempered steel spring washers and screws. In addition, break-in is often half the time required for iron molds. Mold handles are not included. Hardwood Handles are not included and must be purchased separately. Weight given are Lyman's weights with suggested alloy; actual weight may vary due to alloy mixture used. Specifications: - Material: Steel - Capacity: 2 - Diameter: 0. 43" - Bullet Style: Semi-Wad cutter - Handle Included: No - Gas Check: No - Bullet Weight: 245 Grains - Mold Caliber: 44 Caliber

  • Color: Unknown
  • Brand: Lyman
  • ASIN: B001PR9710
  • UPC: 011516204219

Lyman, Black Powder Mould.54 Caliber, 450 Grains

Lyman, Black Powder Mould.54 Caliber, 450

Lyman 1-Cavity Bullet Molds are made from solid leaded-steel and machined to an exact and smooth super fine finish. The molds are then heat treated (that is why they are blue in color) and feature hardened steel alignment pins to provide many years of bullet casting service. Sprue plates are made from solid steel, ground flat and held tightly in place with tempered steel spring washers and screws. In addition, break-in is often half the time required for iron molds. Mold handles are not included. Hardwood Handles are not included and must be purchased separately. Weight given are Lyman's weights with suggested alloy; actual weight may vary due to alloy mixture used. Specifications: - Caliber: . 54 - Material: Steel - Capacity: 1 - Diameter: 0. 548" - Bullet Style: Plains - Handle Included: No - Gas Check: No - Bullet Weight: 450 Grains - Mold Caliber: 54 Caliber

  • Color: Unknown
  • Brand: Lyman
  • ASIN: B005I0L0HE
  • UPC: 011516246578

RCBS Wood/Steel 80025 Mould Handles Extra Long Hardwood Grips

RCBS Wood/Steel 80025 Mould Handles Extra Long Hardwood

RCBS wood/steel 80025 mould handles extra long hardwood grips. Hunting reloading bullet casting tools. Made of the highest quality materials

  • Brand: RCBS
  • ASIN: B000KKB860
  • UPC: 076683800251

LEE PRECISION C309-170-F Double Cavity Mold

LEE PRECISION C309-170-F Double Cavity

Lee Double Cavity Mold produces a .309 diameter 170 grain round nose bullet suitable for cartridges like 30 Caliber Rifle. Handles included.

  • Brand: LEE PRECISION
  • ASIN: B001GXLRXE
  • UPC: 734307903688
Similar Caliber Bullet Mold Results
Caliber Bullet Mold Video Reviews

Reloading - Altering a 50 Caliber Bullet Mold Presented by Larry Potterfield of MidwayUSA

Caliber Bullet Mold

For the full length version of this and other MidwayUSA videos visit the MidwayUSA Video Library:...

Tags:

.50 Caliber Bullet Mold Testing And 5 Shot Penetration Test With The PCP

Caliber Bullet Mold

Here is a quick video of the results from casting bullets in my home made bullet mold, turned out...

Tags: bullet mold .50 caliber cal pcp pre charged pne...

Eras Gone Bullet Molds Review (And Giveaway Result!)

Caliber Bullet Mold

In this video, I’ll review the .44 caliber Johnston & Dow mold from Eras Gone Bullet Molds. I’ll ...

Tags: Dustin Winegar,eras gone,eras gone bullets,eras...

.50 Caliber Custom Machined Hollow Point Bullet Mold

Caliber Bullet Mold

Made a special size bullet mold for my .50 cal pcp air rifle, machined with a custom tool bit on ...

Tags: Bullet boolits minne ball conical mould mold le...

.36-Caliber Colt Conicals From Eras Gone Bullet Molds: Testing The 17-Grain Load

Caliber Bullet Mold

This video is a response to a viewer request to test the .36-caliber Colt conical bullet with bla...

Tags: Dustin Winegar,black powder,blackpowder,colt,Co...