Brass Light Socket - Polished- 3-Way - 2 Circuit - Removable Turn Knob - Medium Base - 1/8 IP - PLT 80-1046
Brass Light Socket - Polished- 3-Way - 2
The PLT 80-1046 is a solid brass, 4-piece light socket that uses a 3-way bulb to produce three levels of light in a low-medium-high configuration. This 2 circuit 3-way light socket features a polished brass finish, removable brass turn knob, and medium (E26) base. Threaded to fit 1/8 IPS pipe, this 4-piece socket set is equipped with a solid brass shell, cap, ring, and cardboard interior. So, whether your building or repairing lamps, this polished solid brass, on/off socket set will provide practical lighting with the option to alter the appearance! Screw set included for easy mounting.
- Brand: PLT
- ASIN: B0097E41WI
Westinghouse 7043100 Brass Finish 3-Way Pull Chain Socket
Westinghouse 7043100 Brass Finish 3-Way Pull Chain
The three-way pull chain socket can be used to replace a worn or broken socket or to build an entirely new light fixture. This socket pairs with a three-way bulb to offer three light levels. The pull chain switch is well suited to floor or table fixtures, and its brass finish lends a classic look and effectively withstands heat. UL listed and CSA approved for safety, it is rated for 250 watts maximum and 250 volts. The 2-1/4-inch-high socket has a tapped 1/8-IP bushing and uses medium-base bulbs. Brass finish offers high heat resistance Pull chain switch Three different light settings Use with a three-way light bulb Replace worn or broken sockets Build a new light fixture. Dimensions 2-1/4 inches high Tapped 1/8-IP bushing. Installation UL listed and CSA approved for safety Compatible with medium-base bulbs, 250 watts maximum Rated for 250 volts.
- Brand: Westinghouse
- ASIN: B00002NAD2
- UPC: 030721704314
Brass Light Socket - Plated - 3-Terminal - 2 Circuit - Turn Knob - Medium Base Socket - 1/8 IPS - PLT 90-421
Brass Light Socket - Plated - 3-Terminal -
This is the two circuit three wire turn knob socket for a night light table lamp (not to be confused with a 3 way socket which only controls one light bulbs that has 3 different wattage). This socket controls a second satellite lamp socket containing a 7 watt candelabra based night light bulb that is found in the base of the lamp (or any similar setup with an auxillary socket that needs to be controlled). On the first click the night light bulb is lit, on the second click the main light bulb in the table lamp socket is lit, on the third click they both are lit together, and on the forth click the lamp is off. Wiring diagram is included with the socket.
- Color: Gold
- Brand: PLT
- ASIN: B0097E3LN8
- UPC: 732454600375
B&P Lamp 3-Terminal Med. Base, Turn Knob Socket Interior
EFINEHOME Replacement 2 Pack E26 E27 Phenolic 3 Way Turn Knob Medium Base Light Socket Thread and Ring 1/8 IP Thread Cap Edison Retro Pendant Lamp Holder
EFINEHOME Replacement 2 Pack E26 E27 Phenolic 3
Specification: Color: Black Voltage: 250W/250V Material: Bakelite Features: - Easy to use 2 piece shell design allows for easier wiring of internal socket. - Always make sure lamp cord is unplugged prior to rewiring any lamp. - Threaded top of socket is 1-5/16" diameter across. - Socket is 2-3/4" high overall. - Ring has a 2-1/8" outside diameter. - Bottom of socket is threaded 1/8 IP standard lamp thread. Package included: 2x E26/E27 Base
- Brand: EFINEHOME
- ASIN: B074XXR3QB
(2 pack) 3 way socket replacement for lamp, Medium Base Interior Only, Incandescent Lamp holder, Removable Turn Knob, 2-Circuit.
(2 pack) 3 way socket replacement for lamp,
Have you found yourself replacing lamps or over paying for a simple socket change? Do you want to save time and money? Then you've come to the right place! ESC inc. has been in the repair industry for over 30 years! We'll guide you through this simple process so that you never have to replace your lamps or over pay for a socket change again! Easy 5 step process to install 1. On the right side of socket housing by the switch (Press) into housing to release outer shell, in some cases you will need to press back of housing as well. (Use a flat head screw driver) 2. Remove inner socket from housing DO NOT remove cardboard insulation. 3. With a flat head or Philips screw driver unscrew both bottom screws with the copper wire wrapped around them. 4. Keep copper wire tightly wrapped together and wrap them around replacement ESC socket bottom screws and tighten them down. There is no difference between screws don't worry about interchanging wires on them. 5. Press inner socket firmly into place in the earlier removed housing, screws with wire must be pressed all the way inside and should not be showing, then push housing and socket back into place on the original base that it was earlier removed from.-Don't forget your bragging rights here, or with friends and family!- Now Get Yours...
- Brand: ESC
- ASIN: B07CZPDFMR
- UPC: 618028458224
Satco 3 Piece Stamped Solid Brass 3 Way (2 Circuit) Turn Knob Socket
Westinghouse Lighting 70412 Lighting 3 Way Lamp Sockets
Westinghouse Lighting 70412 Lighting 3 Way Lamp
The Westinghouse Three-Way Turn-Knob Socket can be used to replace a worn or broken socket or to build an entirely new light fixture. This socket pairs with a three-way bulb to offer three light levels. Its turn-knob switch makes operation a snap, and the brass finish has a classic look and effectively withstands heat. Thanks to its straight bracket design, installation is easy. UL listed and CSA approved for safety, it is rated for 250 watts maximum and 250 volts. The 2-1/2-inch-high socket has a tapped 1/8-IP bushing and uses medium-base bulbs. Westinghouse is a global brand with a simple philosophy: make life easier for everyone who buys its products. The company offers ceiling fans, lighting fixtures, lighting hardware, lighting accessories, and light bulbs for both consumer and commercial applications. Westinghouse products are designed for exceptional quality, reliability, and innovation. Product reference number 70412.
- Color: Brass
- Brand: Westinghouse Lighting
- ASIN: B0002YURAM
- UPC: 030721704123
GE 3-Way Socket, Turn for Low, Medium and High Settings, for Floor and Table Lamps, DIY Project, UL Listed, Black, 18275
GE 3-Way Socket, Turn for Low, Medium and
Fix a lamp with a broken or worn out lamp socket with the GE 3-Way Lamp Socket. The socket is perfect for repairing or replacing a socket in a lamp. The socket’s switch turns on three ways: low, medium or high lighting settings. The socket is also perfect for DIY lamp projects. This socket has an electrical rating of 250VAC and 250W. It can only be used with copper wire. The GE 3-Way Lamp Socket is UL Listed.
- Color: Black
- Brand: GE
- ASIN: B000LNOISG
- UPC: 783961235338
GE 3-Way Lamp Socket, Medium Base, Turn for Low-Medium-High Light Settings, For Floor and Table Lamps, DIY Project, UL Listed, Brushed Gold, 54372
Tall Brass Table Lamp with 3 way Socket Replacement
Table lamp repair: This tall brass colored table lamp has a bad socket. We show you how to replac...
How to replace a Lamp Socket
This video shows how to replace a faulty 3-way socket on a table lamp. This method can also be us...
Replacing 3-way lamp socket
*Do this at your own risk* Today I am showing how to replace a 3-way lamp socket in a household ...
Home Help : How to Replace a Lamp Socket
Replacing a lamp socket should be approached with caution due to the presence of electricity. Rep...
A Common Goof Replacing Outlets
Visit http://thecircuitdetective.com/basic_house_wiring.php for more resources. How hard can it b...