Outside Distributing 12-0501-R Brake Lever, Right Hand

Outside Distributing 12-0501-R Brake Lever, Right

Dual Cable Brake Lever: Right hand mount for ATVs using a dual cable system for from drum brakes. Co millimeter only used on 4-stroke units 50-125cc ATVs.

  • Brand: Outside Distributing
  • ASIN: B00EU6IO8U

Ztto 1Pair Cyclo-Cross Bike Bicycle CrossTop Brake Lever Set for 22.2mm Handlebar

Ztto 1Pair Cyclo-Cross Bike Bicycle CrossTop Brake Lever

ZTTO TOP CYCLO-CROSS BIKE BRAKE LEVER Do you or your lover have a "Reach" problem when you ride your road bike? With these levers, you can feel much more confident on the bike. These aluminium levers were originally intended for use in cyclocross and have proven to be popular with cycle tourists and commuters too. The levers fit to the most of standard handlebars. The existing brake outer cables need to be cut where the levers occupy space on the handlebars, and the inner cables fed back through the new levers to complete the loop to the cantilever arms. They work well with either V-brakes or cantilver brakes though they introduce some friction into the cable run that can be felt at the main brake levers. They are designed to work in line with traditional drop bar shifter/levers to provide an additional braking control position on the top of handlebars. SPECS System: Caliper or Canti brake lever Material: Forged aluminium lever with a forged aluminium bracketLever  Blade: 2 finger lever blade Dimension: For 22.2mm OD handlebars Weight: 100g per pair (sold as a pair) Available Colors: Black Brake Cable type: 1.5 - 1.6mm

  • Brand: Ztto
  • ASIN: B075691691
  • UPC: 711202076624

Lokar 70-EHBF Floor Mount Emergency Hand Brake Boot with Ring

Lokar 70-EHBF Floor Mount Emergency Hand Brake Boot

Lokar Floor Mount Emergency Brake Boot features the Lokar and Hand Brake Boots. They are black Naugahyde and all sets include a boot, polished stainless base ring, or billet aluminum ring with ball-milled edge and stainless screws. The Billet aluminum rings are also available in black anodized. The classic shifter boot is designed with a polished stainless bezel on top of the boot which fits over the shifter lever. It also includes a foam rubber seal to eliminate air flow from the floor through the boot. The Hand Brake Boots are available in transmount or floor mount styles. All boots hug the shifter lever and there are no unsightly pull ties or laces.

  • Brand: Lokar
  • ASIN: B000COMNHW
  • UPC: 815470007554

Origin8 Cross Top-Mount Brake Lever Set, 26.0mm

Origin8 Cross Top-Mount Brake Lever Set,

BRAKE LEVER OR8 CROSS BK 26.0

  • Brand: Origin8
  • ASIN: B0186ONZOY
  • UPC: 888571027561

Acouto Motorcycle Modification 7/8" (22mm Universal Hydraulic Brake + Clutch Lever Left and Right Pair Metal Oil Cup Suitable for Most Motorcycles (Silver)

Acouto Motorcycle Modification 7/8" (22mm Universal Hydraulic Brake

Specifications: Material: Aluminum Color: Gold / Silver / Red / Blue / Orange (optional) Size: as picture show Package Weight: approx.690g Fitment: Universal Package Included: 1 x Pair of Brake & Clutch Master Cylinder Levers Notes: 1. Please allow 1-3mm error due to manual measurement. Thanks for your understanding. 2. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.

  • Color: Silver
  • Brand: Acouto
  • ASIN: B07QF6DBNL
  • UPC: 747333612486

Lokar EHB-7000F Floor Mount Emergency Hand Brake

Lokar EHB-7000F Floor Mount Emergency Hand

Lokar Floor Mount Emergency Hand Brake features the same superior craftsmanship you have come to expect of all our products. It is an NSRA Best New Product Lokar Under-the-Dash Foot Operated Emergency Brake. This foot brake gives you ease of operation along with a clean, out of the way emergency brake.

  • Brand: Lokar
  • ASIN: B000COMNKY
  • UPC: 815470007356

1" Handlebar 14mm Bore Motorcycle Left Clutch Lever & Right Hydraulic Brake Master Cylinder Lever Fits Honda, Kawasaki, Suzuki, Yamaha Chrome

1" Handlebar 14mm Bore Motorcycle Left Clutch Lever

??Fitments:  Honda:  Goldwing 1500 1997-2000 Magna 750 1994-2003 Shadow ACE 1100 1998-1999, Shadow ACE 750 2002-2003 Shadow Aero 1100 1998-2002, Shadow Aero 750 2004-2013 Shadow Phantom 750 2010-2013 Shadow Sabre 1100 2000-2007 Shadow Spirit 1100 1998-2007, Shadow Spirit 750 2001-2013 Shadow VLX 600 1999-2007 VTX1300C 2004-2008, VTX1300T 2008-2009 VTX1800 2009, VTX1800C 2002-2004, VTX1800C1 2005-2007, VTX1800C2 2005-2006, VTX1800C3 2005-2006 VTX1800F1 2005-2008, VTX1800F2 2005-2007, VTX1800F3 2005-2008 VTX1800N 2004, VTX1800N1 2005-2008, VTX1800N2 2005-2007, VTX1800N3 2005-2008 VTX1800R 2002-2004, VTX1800R1 2005-2007, VTX1800R2 2006-2007, VTX1800R3 2005-2007 VTX1800S 2002-2004, VTX1800S1 2005-2006, VTX1800S2 2005-2006, VTX1800S3 2005-2006 VTX1800T1 2007-2008, VTX1800T2 2007, VTX1800T3 2008 Kawasaki:  Vulcan 1500 1996-2005 Vulcan 1500L 1996-1997 Vulcan 1600 2006-2008 Vulcan 1700 2009-2013 Vulcan 2000 2004- 2010 Vulcan 800 1995-2005 Vulcan 900 2006-2013 Suzuki:  Boulevard 2005-2013 Intruder 1400 1998-2004 Intruder 1500 1998-2004 Intruder 800 1998-2004 Intruder Volusia 800 2001-2004 Marauder 1600 2004 Marauder 800 2001-2004 Savage 650 1996-2004 Yamaha:  Raider S 2008-2013 Road Star 1999-2013 Road Star MM 2000 Road Star S 2008-2013 Royal Star 2002-2013 Royal Star Tour Deluxe...

  • Brand: Anxingo
  • ASIN: B07ML3GSWG
  • UPC: 743815503846

OEM Suzuki JR50 Front Brake Lever Mount Perch

OEM Suzuki JR50 Front Brake Lever Mount

OEM Suzuki Front Brake Lever with PerchFits:Suzuki1987-00 JR50

  • Brand: Suzuki
  • ASIN: B016TWERB0
  • UPC: 718721724852

SRAM Force 1 HRD Brake Lever & Flat Mount Caliper One Color, Left

SRAM Force 1 HRD Brake Lever & Flat

The SRAM Force 1 HRD Brake Lever & Flat Mount Caliper sets the trend for powerful braking and precise shifting at a more affordable price point than its top-tier Red counterpart. Force 22's functionality rivals that of Red, and swaps out the full carbon levers and titanium hardware for a carbon brake lever, aluminum shift lever, and stainless steel hardware that may tack on a smidgeon of weight but also saves your bank account a bundle. Force 22 HRD boasts the versatility to manage a rapidly rising flood of disc-equipped road, gravel, cyclocross and all-road machines. While the lever hood aesthetics may not appeal to everyone, we've found the additional height to be surprisingly functional when traversing the less traveled of roads. Navigating steep descents and chattery surfaces are a breeze with that bit of extra leverage and grip, which also nearly eliminates the possibility of your hands getting thrown forward off the hoods after a shocking encounter with a pothole hiding under smooth, loose gravel. The Force 22 HRD levers incorporate the adjustability and smooth shifting functionality we've come to expect from all of SRAM's higher end offerings. A slight redesign from the original version sees a more comfortable hood-top hand positioning, which is much appreciated on long gr...

  • Color: Black
  • Brand: SRAM
  • ASIN: B01AX6X8KY
  • UPC: 710845781407

Front Rear Floorboards Footpeg Mount Brake Arm Kits Heel Toe Shift Levers Shifter Pegs Dash Accessory Pack Ignition Fuel Door Saddlebag Latch Cover Frame Grille Compatible with 09-13 Harley Touring

Front Rear Floorboards Footpeg Mount Brake Arm Kits

Specifications: Package Includes: » 2X CNC Driver Stretched Floorboards (Left and Right) » 2X CNC Rear Passenger Floorboards (Left and Right) » 1X Brake Arm Lever with Peg Pedal » 1X Front Shift Lever (Toe) + 1X Rear Shift Lever (Heel) + 2X Shifter Pegs » 1X Fuel Door Cover » 1X Dash Insert » 1X Ignition Switch Cover » 2X Passenger Footpeg Mount Kit (Left and Right) + 2X Mounting Screws » Pair of Saddlebag Latch Cover + Set of Mounting Screw » 1X Frame Grille + Set of Mounting Screws Total weight: 6972g Color: Black + Silver (Chrome) Material: Billet CNC Aluminum Driver Floorboard (LxW): 18" (45.5cm) x 5 5/8" (14.3cm) - Mounting Space: 8" (20.3cm) Passenger Floorboard (LxW): 7 9/32" (18.5cm) x 3 47/64" (9.5cm) - Mounting Hole: 10mm Brake Lever (LxW): 11 13/16" (30cm) x 3 5/32" (8cm) - Mounting hole size: 16mm Peg Pedal (LxW): 3 15/16" (10cm) x 1 3/16" (3cm) Shift Lever (LxW): 8 21/32" (22cm) x 25/32" (2cm) Shifter Peg (LxW): 3" (7.5cm) x 1 3/16" (3cm) Fuel Door Diameter: 5 1/8"(13cm) Dash Insert: Length: 8 11/32"(21.2cm) Ignition Switch Cover (LxWxH): 2 9/32"(5.8cm) x 2" (5cm) x 1 1/2"(4cm) Footpeg Mount Kit: Mounting Space: 1/2" (1.3cm) - Mounting Diameter: 10mm Saddlebag Latch Cover (LxW): 8 21/32" (22cm) x 2 9/16" (6.5cm) Fra...

  • Color: Black
  • Brand: Astra Depot
  • ASIN: B07D5X5ZYR

BlueSunshine MTB BB7 Mechanical Disc Brake Front and Rear 160mm whit Bolts and Cable

BlueSunshine MTB BB7 Mechanical Disc Brake Front and

BB7 has set the standard for mechanical disc brakes for years. Avid's CPS (caliper positioning system) continues to make setup and adjustment a snap. Each kit includes a set of TWO of the following: 1 caliper, 6-bolt rotor, mounting hardware, and adapters (one brake). Works with any linear pull brake lever, including Avid and others (levers are not included). Package List : 2 pcs 1.5M brake cable 1 pcs Front 160mm Caliper Adapter with Pad 1 pcs Rear 160mm Caliper Adapter with Pad 2 pcs Disc Brake Rotors (front and rear) 1 set Brake Rotor Bolts

  • Brand: BlueSunshine
  • ASIN: B077JVRG6X
  • UPC: 661083992561

Driver Passenger Floorboards w/Peg Mount Bracket + Brake Arm Kit + Toe Heel Shift Lever Shifter Peg + Dash Accessory Pack + Ignition Cover + Saddlebag Latch Cover Compatible with 14-16 Harley Touring

Driver Passenger Floorboards w/Peg Mount Bracket + Brake

Specifications: Condition: 100% Brand New Package Includes: » 2X Driver Stretched Floorboards (Left and Right) » 2X Passenger Floorboards (Left and Right) » 2X Passenger Footpeg Mount Kit (Left and Right) + 2X Mounting Screws » 1X Brake Arm Lever with Peg Pedal » 1X Front Shift Lever (Toe) + 1X Rear Shift Lever (Heel) + 2X Shifter Peg » 1X Fuel Door Cover » 1X Dash Insert with 3M Adhesive Tape » 1X Ignition Switch Cover » 2X Saddlebag Latch Cover (Left and Right) Size (As the picture shown) » Driver Floorboard (LxW): 18" (45.5cm) x 5 5/8" (14.3cm) - Mounting Space: 8" (20.3cm) » Passenger Floor board (LxW): 7 9/32" (18.5cm) x Width: 3 47/64" (9.5cm) - Mounting Hole: 10mm » Brake Lever (LxW): 11 13/16" (30cm) x 3 5/32" (8cm)- mounting hole: 19mm » Peg Pedal (LxW): 3 15/16" (10cm) x 1 3/16" (3cm) » Shift Lever (LxW): 8 21/32" (22cm) x 25/32" (2cm) » Shifter Peg (LxW): 3" (7.5cm) x 1 3/16" (3cm) » Fuel Door Cover Diameter: 5 1/8" (13cm) » Dash Insert Length: 8 11/32"(21.2cm) » Ignition Switch Cover (LxWxH): 2 11/64"(5.5cm) x 1 1/2" (4cm) x Height: 1 3/8"(3.5cm) » Foot Peg: Mounting Space: 1/2" (1.3cm) - Mounting Diameter: 10mm» Saddlebag Latch Cover: Length: 9 27/32" (25cm) -- Width: 1 49/64" (4.5cm) Color: Black + Chrome Material: Billet CNC Aluminum Total...

  • Brand: Astra Depot
  • ASIN: B07CG6TQNS

2X Left & Right Brake Clutch Handle Levers Replacement Motorcycle

2X Left & Right Brake Clutch Handle Levers

Item Descriptions:-Universal fits all 7/8 inch£¨22mm£ handlebars.-With M10 mirror thread.-Adjustable reach system provides the perfect lever position for all riders.-Fit for:7/8 inch Universal Motorcycle Brake Handlebar.-Clutch lever works with: Honda CG 125-Guaranteed good quality & made from the highest quality materials available.-Adjustable set screw to regulate throttle range of motion.-Easy to install.-No modification is required.-Please Make Sure Your Handle Bar Diameter Is 7/8'' Before Purchase.Package:A Pair of Brake Clutch LeverItem Specifications:Material: Aluminium AlloyColor: BlackHole Diameter: 2.2cm (0.866')(adjustable)Handle Length: 18.3cm(7.2'')Total Weight: 352gUS Fitment Profile ID:977AU Fitment Profile ID:978Brand:Unbranded/GenericMPN:[AUTO FILL EAN]

  • Brand: Micro Trader
  • ASIN: B07JCV8BMX
  • UPC: 786862963133

TRP RL 951 Carbon Top Mount Brake Lever 31.8mm Pair Carbon

TRP RL 951 Carbon Top Mount Brake Lever

TRP Cross levers. Works with caliper or cantilever brakes, hinged clamp, carbon lever blade.Forged alloy bracket/carbon fiber leverReach adjustment and return springWorks with caliper or cantilever brakes, hinged clampItem SpecificationsColorBlack/CarbonWeight38gAero Bar/Cross Lever Diameter31.7/31.8Brake Lever ActuationShort PullDefined ColorBlack

  • Brand: TRP
  • ASIN: B001C4PQE8
  • UPC: 822122001495

Master Cylinder with Handle Lever for Rear Disk Brake Systems (Mounts on left side). Fits 7/8" (22mm) handlebars

Master Cylinder with Handle Lever for Rear Disk

  • Brand: MMG
  • ASIN: B0773Y5BWS

Short Brake Clutch Levers CNC Adjustable Aluminum for YAMAHA FZ1 FAZER 06-15,FZ8 11-15,FZ6R 09-15,FZ6 FAZER 04-10,XSR 700/900 ABS 16-17,MT-07 14-17,MT09/SR/FZ9 14-17,XJR DIVERSION SPL077

Short Brake Clutch Levers CNC Adjustable Aluminum for

Process: CNC and anodizing Material:6063 T6 aluminum Length: Shorty (about 1 inch shorter than the original) Both clutch and brake levers are fully adjustable with Stainless Steel fasteners and springs. Sold as a pair (brake/clutch) Lever color: black/silver/blue/red/gold/titanium/green/orange Anti-oxidizing and long lasting Fitment:   YAMAHA FZ1 FAZER 2006-2015  YAMAHA FZ8 2011-2015  YAMAHA FZ6R 2009-2015  YAMAHA FZ6 FAZER 2004-2010  YAMAHA XSR 900 ABS 2016-2017  YAMAHA XSR 700 ABS 2016-2017  YAMAHA MT-07 2014   YAMAHA MT-09/SR/FZ9 2014   YAMAHA XJ6 DIVERSION 2009-2015

  • Color: Titanium
  • Brand: SunPower
  • ASIN: B01N4WTKIT
  • UPC: 716045382796

Tektro RL721 Bike Bicycle Cross Brake Lever Set Black 31.8mm

Tektro RL721 Bike Bicycle Cross Brake Lever Set

Tektro RL Series Cross Levers. Ergonomic lever design with reach adjustment & return spring Sold as pair Hinged clamp style For use with caliper or cantilever brakes Ergonomic lever design Item Specifications Color Black Weight 90 Brake Lever Actuation Short Pull Diameter 31.7/31.8 Defined Color Black

  • Color: Black
  • Brand: Tektro
  • ASIN: B01N8V20D2
  • UPC: 822051241092

Honda Motorcycle Hydraulic Brake and Clutch Master Cylinder Set - Front Mount Outlet

Honda Motorcycle Hydraulic Brake and Clutch Master Cylinder

One set of brake and clutch hydraulic master cylinder set to fit on Honda with 7/8" handlebar.

  • Color: Black Housing with Polish Lever
  • Brand: WorldPac
  • ASIN: B01F0DZMNQ

HTT Motorcycle Adjustable Length Black CNC 7/8" (22mm) Protector Proguard System Pro Brake Clutch Levers Protect Guard For Harley Dyna Honda CBR VFR CR XR Yamaha FZR YZF PW TW

HTT Motorcycle Adjustable Length Black CNC 7/8" (22mm)

Description: ---Adjustable length, and angle (approx 10 degree of adjustment) for different lever type and adjustment. ---For street riders, it can also be a good safety addition to against bumping into any road hazards. ---This guard protects your front brake from accidentally being engaged if you bump into another rider or other object. ---This type of guard were made a requirement for all Moto GP riders due to the safety regulations.   Feature: ---Condition: 100% Brand new ---Material : Made of aluminum & ABS plastic ---Color: As Picture Show ---Easy to install, No installation instruction Fitment: ---Please Ensure This Part Fits For Your Motorcycle Before Bidding! ---Suitable for all 7/8" (22mm)hollow handle bar, such as: Honda, Suzuki, Yamaha, Kawasaki, Harley Davison, Ducati,KTM, BMW. ---If your motorcycle has a different size thread, or are not hollow, you will need to drill out an opening big enough to fit the internal part of these Brake Protect. ---Honda CBR (All Models & Years) ---Honda VFR (All Models & Years) ---Honda CR / XR (All Models & Years) ---Yamaha FZR / YZF (All Models & Years) ---Yamaha PW / TW (All Models & Years) ---Suzuki GSX / GSXR / Hayabusa (All Models & Years) ---Suzuki RM / DR (All Models & Years) ---Kawasaki Ninja EX / ZX / ZZR (All Models & ...

  • Color: Black
  • Brand: HTTMT
  • ASIN: B01GPBFSMW
  • UPC: 791932505816

TRP Carbon Fiber Top Mount Lever with Titanium Hardware Clamp, Black, 31.8mm

TRP Carbon Fiber Top Mount Lever with Titanium

  • Color: Black
  • Brand: TRP
  • ASIN: B007DCFL9S
Similar Brake Lever Mount Results
Brake Lever Mount Video Reviews

Brake Lever Mounting & Positioning - Drop Bars

Brake Lever Mount

How to install and position brake levers on bikes with drop handlebars. Questions or comments? ...

Tags: Bikes,Bike Maintenance,Bike Repair,Bicycles,Bic...

Brake Lever Mounting & Positioning - Upright Bars

Brake Lever Mount

How to install and position brake levers on bikes with upright handlebars. Questions or comment...

Tags: Bikes,Bike Maintenance,Bike Repair,Bicycles,Bic...

Installing Cross/Inline Brake Levers

Brake Lever Mount

I show how to install cyclocross/in-line/interrupter brake levers on my DIY homemade cyclocross/g...

Tags: Bikes

Ask a Mechanic - Installing Secondary Cross Top Brake Levers

Brake Lever Mount

Sign up for the Art's Cyclery mailing list to get the latest sale information, special deals, and...

Tags: Brakes,Cross top,Ask a Mechanic,VeloNews,Art's ...

Brake Housing & Cable Installation - Drop Bars

Brake Lever Mount

How to install housing and cable on a bike with drop handlebars. Questions or comments? Leave t...

Tags: Bikes,Bike Maintenance,Bike Repair,Bicycles,Bic...