Eckler's Premier Quality Products 50206399 Chevelle & Malibu Clutch Fork Boot Bellhousing

Eckler's Premier Quality Products 50206399 Chevelle & Malibu

Superior Reproduction of Original Black Molded Rubber One Required per Car Fits Big Block or Small Block Cars Ecklers brings you this reproduction clutch fork boot to replace a commonly worn part. The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in theclutchbellhousing. Every time you push the clutch pedal in your manual transmission Chevelle, the clutch fork boot gets a work out and will eventually tear. Check your Chevelle's bellhousing today and order your replacement from Ecklers. NOTE: Chevelles with hydraulic throw out bearings may use this boot for the hydraulic lines to pass through as some measure of protection. However, the clutch fork boot will not provide an air tight seal.

  • Brand: Premier Quality Products
  • ASIN: B01M0S1HY3

NEW 55-59 CHEVY LEATHER CLUTCH FORK BOOT THAT FITS 3733365 BELLHOUSINGS, V-8 ENGINES & MANUAL TRANSMISSIONS ON 55-57 CHEVY & 55-59 CORVETTE

NEW 55-59 CHEVY LEATHER CLUTCH FORK BOOT THAT

Brand New Southwest Speed Leather Clutch Fork Boot that fits 3733365 Bellhousings with an 11" Clutch that fits 1955-1959 Corvette's and 1955-1957 Chevy Passenger Cars with V-8 Engines and Manual Transmissions (SWS Part # 650-3949). This Southwest Speed Clutch Fork Boot is an exact replica of the original GM 3738285 clutch fork boot found on 1955-1959 Chevy Corvette's and 1955-1957 Chevy Passenger Cars. It fits the GM 3733365 bellhousing that is used on GM models with Big Block and Small Block engines equipped with an 11" clutch. Features: Replaces GM Part # 3738285 Exact Replica of the original Crafted from Leather Prevents dirt and moisture from entering the bell housing Designed to be a snug fit that will last for years Boot has sewn seams and metal brackets like the original Factory Applications: Chevy: 1955-1957 150 with V-8 Engines 1955-1957 210 with V-8 Engines 1955-1957 Bel Air with V-8 Engines 1955-1959 Corvette with V-8 Engines 1957 Del Ray with V-8 Engines 1955-1957 Nomad with V-8 Engines 1955-1957 Sedan Delivery with V-8 Engines

  • Color: 650-3949
  • Brand: Southwest Speed
  • ASIN: B01MU7A66J

NEW SWS CHEVY ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, THROWOUT BEARING, CLUTCH FORK, CLUTCH FORK BOOT & CLUTCH PIVOT BALL, GM 621 3899621 REPLACEMENT FOR SBC & BBC FOR 11" MANUAL CLUTCH APPLICATIONS

NEW SWS CHEVY ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER,

Kit Includes: Southwest Speed Cast Aluminum Performance Bellhousing (# 650-3975) Replaces GM Part # 3899621 Cast Aluminum Housing Works with GM transmissions with a 4.675" O.D. Bearing Retainer Clears 168 tooth 14" Flywheels with factory 11" clutch discs 1/2"-13 tapped hole for z-bar manual clutch linkage, if needed. Fits ALL Small Block & Big Block Chevrolet engines regardless of factory clutch size Southwest Speed Flywheel Inspection Cover (# 650-3968) Replaces GM Part # 3843943 Includes 1/4" bolts to install inspection shield Exact Replica of the Original Southwest Speed Clutch Fork with Ball Retaining Spring (# 650-4028) Replaces GM Part # 3892632 Exact Replica of the Original Southwest Speed Throwout Bearing (# 650-4035) Replaces GM Part # 19245400 Exact Replica of the original Designed to effectively reduce friction Made of high quality materials for long service life Southwest Speed Clutch Fork Boot (# 650-3952) Replaces GM Part # 3993851 Exact Replica of the original Molded from E.P.D.M rubber for a snug fit that will last for years Southwest Speed Standard Clutch Fork Pivot Ball (# 650-4018) Replaces GM Part # 3729000 Installs into bellhousing to support clutch fork 13/16"-16 Threads, 1 1/2" total length end to end

  • Color: 650-3975KIT
  • Brand: Southwest Speed
  • ASIN: B00YB0NWIM

NEW GM CLUTCH FORK BOOT FOR GM 621 3899621 BELLHOUSINGS WITH MANUAL TRANSMISSIONS ON 1961-1980 GM A-BODY, B-BODY, F-BODY, X-BODY, REPLACES GM 3993851, 3841738, 14007355

NEW GM CLUTCH FORK BOOT FOR GM 621

Brand New Southwest Speed Clutch Fork Boot that fits GM 3899621 Bellhousings used with 11" Clutches, as well as many others. (SWS Part # 650-3952). For use with Manual transmissions only. This Southwest Speed Clutch Fork Boot is an exact replica of the original GM 3993851. It fits the GM 3899621 bellhousing that is used on GM models with Big Block and Small Block engines equipped with an 11" clutch. Features: Replaces GM # 3993851, 3841738, 14007355, and others Exact Replica of the original with clutch fork slot Slips into the clutch fork opening in the bellhousing Molded from E.P.D.M rubber for a snug fit that will last for years Applications: 1961-1980 GM A-Body, B-Body, F-Body, X-Body (Chevrolet, Buick, Oldsmobile, Pontiac, and Cadillac)

  • Color: 650-3952
  • Brand: Southwest Speed
  • ASIN: B00YB0O5II

NEW SWS CHEVY ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, CLUTCH FORK BOOT & CLUTCH PIVOT BALL, GM 621 3899621 REPLACEMENT FOR SBC & BBC FOR 11" MANUAL CLUTCH APPLICATIONS

NEW SWS CHEVY ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER,

This performance aluminum bellhousing does not have the GM Part # 3899621 casting number but will look, fit, and perform just like original. If you are doing a restoration of an early muscle car, or just want the correct bellhousing to finish that rod project, this bellhousing is the perfect part! Kit Includes: Southwest Speed Cast Aluminum Performance Bellhousing (# 650-3975) Replaces GM Part # 3899621 Cast Aluminum Housing Works with GM transmissions with a 4.675" O.D. Bearing Retainer Clears 168 tooth 14" Flywheels with factory 11" clutch discs 1/2"-13 tapped hole for z-bar manual clutch linkage, if needed. Fits ALL Small Block and Big Block Chevrolet engines regardless of factory clutch size Southwest Speed Flywheel Inspection Cover (# 650-3968) Replaces GM Part # 3843943 Includes 1/4" bolts to install inspection shield Exact Replica of the Original Southwest Speed Standard Clutch Fork Pivot Ball (# 650-4018) Replaces GM Part # 3729000 Installs into bellhousing to support clutch fork 13/16"-16 Threads, 1 1/2" total length end to end Southwest Speed Clutch Fork Boot (# 650-3952) Replaces GM Part # 3993851 Exact Replica of the original Molded from E.P.D.M rubber for a snug fit that will last for years Fits: 1964 - 1988 Chevy Chevelle, Malibu, Monte Carlo* 1959 - 1...

  • Color: 650-3975_3968_4018_3952
  • Brand: Southwest Speed
  • ASIN: B00YB0NTM6

Auto Metal Direct W-478 Bellhousing to Clutch Fork Boot

Auto Metal Direct W-478 Bellhousing to Clutch Fork

Bellhousing to Clutch Fork Boot1967-81 Camaro/Firebird1968-79 Nova 1964-81 Chevelle Correct reproduction. Quality molded rubber. All big or small block cars.

  • Brand: Auto Metal Direct
  • ASIN: B00THJQZPY
  • UPC: 012565008223

Eckler's Premier Quality Products 57-177181 - Chevy Clutch Fork Boot For Aluminum Bellhousing

Eckler's Premier Quality Products 57-177181 - Chevy Clutch

Replacement Boot For Use With Bellhousing P/N 08-23 Seals Clutch Fork To Bellhousing

  • Brand: Premier Quality Products
  • ASIN: B01LYTVZ9Y

NEW GM THROWOUT BEARING, CLUTCH FORK, CLUTCH FORK BOOT, CLUTCH PIVOT BALL FOR GM 621 3899621 BELLHOUSINGS, REPLACES GM 3892632, 19245400, 3993851, 3729000

NEW GM THROWOUT BEARING, CLUTCH FORK, CLUTCH FORK

Brand New Southwest Speed Clutch Fork, Throwout Bearing, Clutch Fork Boot, and Clutch Fork Pivot Ball Kit that fits the GM 3899621 11" Bellhousing, as well as nearly all GM bellhousings that use both 153 tooth and 168 tooth flywheels and 10 1/2" and 11" clutches (SWS Part # 650-4028, 650-4035, 650-3952, and 650-4018). This Southwest Speed Clutch Fork, Throwout Bearing, Clutch Fork Boot, and Pivot Ball is a exact replica of the GM OEM parts. Kit Includes: Southwest Speed Clutch Fork with Ball Retaining Spring (# 650-4028) Replaces GM Part # 3892632 Exact Replica of the Original Fits All Models with 10 1/2" or 11" clutches and 153 tooth or 168 tooth Flywheels Fits All Small Block or Big Block Chevrolet Engines with Manual Transmission only Southwest Speed Throwout Bearing (# 650-4035) Replaces GM Part # 19245400 Exact Replica of the original Designed to effectively reduce friction Made of high quality materials for long service life Southwest Speed Clutch Fork Boot (# 650-3952) Replaces GM Part # 3993851 Exact Replica of the original Molded from E.P.D.M rubber for a snug fit that will last for years Southwest Speed Standard Clutch Fork Pivot Ball (# 650-4018) Replaces GM Part # 3729000 Installs into bellhousing to support clutch fork 13/16"-16 Threads, 1 1/2" total length...

  • Color: 650-4028_4035_3952_4018
  • Brand: Southwest Speed
  • ASIN: B00YB0O30I

OER 3993851 Bellhousing Boot

OER 3993851 Bellhousing

Bellhousing Boot1961-1981 GM 1967-1981 Camaro/Firebird1968-1979 Impala, Bel Air, Biscayne, Caprice, Passenger Cars, & Station wagons1968-1979 Nova, Ventura, Apollo, Omega1964-1981 Chevelle, El Camino, GTO, Tempest, Le Mans, Monte Carlo

  • Brand: ORE
  • ASIN: B019XEDIXE
  • UPC: 012997053778

NEW SWS CHEVY 403 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, THROWOUT BEARING, CLUTCH FORK, CLUTCH FORK BOOT & PIVOT BALL, STAMPED WITH #GM 3858403, FOR SBC & BBC 10.5" MANUAL CLUTCH

NEW SWS CHEVY 403 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION

Brand New Southwest Speed Aluminum Bellhousing Kit with Throwout Bearing for use with 10 1/2" Clutches with Manual Transmission. The kit includes a Factory Reproduction GM 3858403 Stamped Bellhousing, Flywheel Inspection Cover, Clutch Fork with Ball Retaining Spring, Throwout Bearing, Clutch Fork Boot, and Clutch Fork Pivot Ball (SWS Part #650-3973, 650-3966, 650-4028, 650-4035, 650-3952, and 650-4018). Kit Includes: Southwest Speed Cast Aluminum Performance Bellhousing (#650-3973) Factory Reproduction 3858403 Bellhousing Fits 10 1/2" Clutches 3858403 Stamped on Bellhousing Cast Aluminum Housing Works with GM transmissions with a 4.675" O.D. Bearing Retainer 1/2"-13 tapped hole for z-bar manual clutch linkage, if needed. Fits ALL Small Block and Big Block Chevrolet engines regardless of factory clutch size Southwest Speed Bellhousing Inspection Cover (#650-3966) Replaces GM Part # 354497 Includes 1/4" bolts to install inspection shield Exact Replica of the Original Southwest Speed Clutch Fork with Ball Retaining Spring (#650-4028) Replaces GM # 3892632 Exact Replica of the Original Southwest Speed Throwout Bearing (#650-4035) Replaces GM # 19245400 Exact Replica of the original Designed to effectively reduce friction Made of high quality materials for long service life S...

  • Color: 650-39735
  • Brand: Southwest Speed
  • ASIN: B01N8ZRPHQ

NEW 55-62 CHEVY BELLHOUSING FLYWHEEL INSPECTION SHIELD & LOWER DUST COVER FOR CARS WITH SBC BBC V-8 ENGINES & MANUAL TRANSMISSIONS, REPLACES GM 3734908 & GM 3704923, COMMONLY FIT 3733365 BELLHOUSINGS

NEW 55-62 CHEVY BELLHOUSING FLYWHEEL INSPECTION SHIELD &

Brand New Southwest Speed Flywheel Inspection Shield and Lower Dust Cover Kit for the applications listed below with V8 Engines and Manual Transmissions (SWS Part # 650-3963 and # 650-3964). This Southwest Speed flywheel inspection shield and lower dust cover are a reproduction of the original GM # 3734908 inspection shield and GM # 3704923 dust cover. This inspection cover and dust cover fits the GM 3733365 11" bellhousing that is used on GM models with Big Block and Small Block engines equipped with an 11" clutch. This bellhousing inspection shield and dust cover will look, fit, and perform just like original. Kit Includes: Southwest Speed Upper Flywheel Inspection Shield (SWS # 650-3963) Replaces GM Part # 3734908 Includes 1/4"-28 threaded bolts Exact Replica of the Original Fits GM Bellhousings with GM casting number 3733365 Fabricated from steel Southwest Speed Lower Bellhousing Dust Cover (SWS # 650-3964) Replaces GM Part # 3704923 Includes 1/4"-28 threaded bolts Exact Replica of the Original Fits GM Bellhousings with GM casting number 3733365 Fabricated from steel

  • Color: 650-3963_3964
  • Brand: Southwest Speed
  • ASIN: B01NCSQRTK

Fairchild Automotive G4161 Clutch Fork Bellhousing Boot 1964-1977 GM A-Body 1967

Fairchild Automotive G4161 Clutch Fork Bellhousing Boot 1964-1977

Custom engineered, molded & extruded rubber and plastic components. Fairchild Industries combines material expertise, engineering design, cutting edge software and warehousing to supply extruded and molded rubber, plastic and elastomer products for our customers worldwide. From Automotive, Agricultural and Industrial OEMs, to Tier 1s and aftermarket companies we serve the entire supply chain in need of our rubber and plastic expertise. From custom seals and hoses to gaskets and grommets, Fairchild Industries provides precision engineering, global manufacturing, and quality assurance to tailor solutions to meet our customers' precise needs in a timely manner.

  • Brand: Fairchild Industries
  • ASIN: B07JY8HR7W
  • UPC: 841880117460

NEW SWS CHEVY 403 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, CLUTCH FORK BOOT & CLUTCH PIVOT BALL, STAMPED WITH #GM 3858403 REPLACEMENT FOR SBC & BBC FOR 10.5" MANUAL CLUTCH APPLICATIONS

NEW SWS CHEVY 403 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION

Brand New Southwest Speed Aluminum Bellhousing Kit for 10 1/2" Clutches with Manual Transmissions that includes a Factory Reproduction GM 3858403 Stamped Bellhousing, Flywheel Inspection Cover, Clutch Fork Pivot Ball, and Clutch Fork Dust Boot (SWS Part #650-3973, 650-3966, 650-4018, and 650-3952). This Southwest Speed 10 1/2" Performance Cast Aluminum Bellhousing is a reproduction of the original 3858403 bellhousing used on GM models with Big Block and Small Block engines equipped with an 10 1/2" clutch. This performance aluminum bellhousing has the GM Part # 3858403 casting number stamped on the outside of the bellhousing just like the original. If you are doing a restoration of an early muscle car, or just want the original 403 bellhousing to finish that rod project, this bellhousing is the perfect part! Kit Includes: Southwest Speed Cast Aluminum Performance Bellhousing (#650-3973) Factory Reproduction 3858403 Bellhousing Fits 10 1/2" Clutches 3858403 Stamped on Bellhousing Cast Aluminum Housing Works with GM transmissions with a 4.675" O.D. Bearing Retainer 1/2"-13 tapped hole for z-bar manual clutch linkage, if needed. Fits ALL Small Block & Big Block Chevrolet engines regardless of factory clutch size Southwest Speed Bellhousing Inspection Cover (#650-3966) Replaces GM ...

  • Color: 650-39733
  • Brand: Southwest Speed
  • ASIN: B01MSLFZTU

Omix-Ada 16916.01 Clutch Housing Cover

Omix-Ada 16916.01 Clutch Housing

This replacement transmission bell housing will replace the damaged or cracked OE bell housing

  • Brand: Omix-Ada
  • ASIN: B000FQ1JY0
  • UPC: 804314047566

NEW CHEVY 365 BELLHOUSING, INSPECTION & DUST COVERS, CLUTCH FORK & BOOT, BALL & THROWOUT BEARING FOR 55-57 CHEVY, 55-59 CORVETTE WITH SBC OR BBC WITH MANUAL TRANSMISSION, STAMPED #GM 3733365

NEW CHEVY 365 BELLHOUSING, INSPECTION & DUST COVERS,

Kit Includes: Southwest Speed Cast Performance Bellhousing (SWS # 650-3970) Factory Reproduction 3733365 Bellhousing Part number and build date cast exactly as the original bellhousing Part Number: 3733365 Build Date: November 19th, 1955 Accepts all standard GM Manual transmissions with 4.675" O.D. bearing retainer Fits all SBC and BBC engines, regardless of factory clutch size 3/8"-16 holes for frame mounting 1/2"-13 holes for transmission 3/8"-16 holes for clutch z-bar bracket 3/8"-16 holes for starter with top hole 3/8 clearance hole for thru-bolt 1/4"-20 holes for dust shields Southwest Speed Upper Flywheel Inspection Shield (SWS # 650-3963) Replaces GM Part # 3734908 Includes 1/4"-28 threaded bolts Exact Replica of the Original Fabricated from steel Southwest Speed Lower Bellhousing Dust Cover (SWS # 650-3964) Replaces GM Part # 3704923 Includes 1/4"-28 threaded bolts Exact Replica of the Original Fabricated from steel Southwest Speed Clutch Fork with Ball Retaining Spring (SWS # 650-4026) Replaces GM # 3739043 Exact Replica of the Original Southwest Speed Throwout Bearing (SWS # 650-4035) Replaces GM # 19245400 Exact Replica of the original Southwest Speed Clutch Fork Boot (SWS # 650-3949) Replaces GM Part # 3738285 Exact Replica of the original Crafted from Leather P...

  • Color: 650-39705
  • Brand: Southwest Speed
  • ASIN: B01N30JEL9

NEW 55-57 CHEVY 365 BELLHOUSING, INSPECTION & DUST COVERS, CLUTCH FORK & BOOT, BALL, THROWOUT BEARING, & REAR ENGINE MOUNTS, FITS SBC OR BBC WITH MANUAL TRANSMISSION, STAMPED #GM 3733365

NEW 55-57 CHEVY 365 BELLHOUSING, INSPECTION & DUST

Kit Includes: Southwest Speed Cast Performance Bellhousing (SWS # 650-3970) Factory Reproduction 3733365 Bellhousing Part Number: 3733365 Build Date: November 19th, 1955 Accepts all standard GM Manual transmissions with 4.675" O.D. bearing retainer Fits all SBC and BBC engines, regardless of factory clutch size 3/8"-16 holes for frame mounting 1/2"-13 holes for transmission 3/8"-16 holes for clutch z-bar bracket 3/8"-16 holes for starter with top hole 3/8 clearance hole for thru-bolt 1/4"-20 holes for dust shields Southwest Speed Upper Flywheel Inspection Shield (SWS # 650-3963) Replaces GM Part # 3734908 Includes 1/4"-28 threaded bolts Exact Replica of the Original Southwest Speed Lower Bellhousing Dust Cover (SWS # 650-3964) Replaces GM Part # 3704923 Includes 1/4"-28 threaded bolts Exact Replica of the Original Fabricated from steel Southwest Speed Clutch Fork with Ball Retaining Spring (SWS # 650-4026) Replaces GM # 3739043 Exact Replica of the Original Southwest Speed Throwout Bearing (SWS # 650-4035) Replaces GM # 19245400 Exact Replica of the original Designed to effectively reduce friction Southwest Speed Clutch Fork Boot (SWS # 650-3949) Replaces GM Part # 3738285 Exact Replica of the original Crafted from Leather Southwest Speed Standard Clutch Fork Pivot Ball (S...

  • Color: 650-39707
  • Brand: Southwest Speed
  • ASIN: B01MZ6FP9K

Eckler's Premier Quality Products 33179356 Camaro Clutch Fork Boot Bellhousing 83

Eckler's Premier Quality Products 33179356 Camaro Clutch Fork

Good Quality Reproduction Clutch Fork Boot Black Molded Rubber One Required per Car Fits Big Block or Small Block Cars Rick's brings you this reproduction clutch fork boot to replace a commonly worn Camaro part. The bellhousing to clutch fork rubber boot seals out water and dust by sealing around the clutch fork and the rectangular fork hole in theCamaro clutchbellhousing. Every time you push the clutch pedal in your manual transmission Camaro, the clutch fork boot gets a work out and will eventually tear. Check your Camaro's bellhousing today and order your replacement from Rick's First Generation. Always trust Rick's Camaro for all your performance, accessory, and restoration needs! NOTE: Camaros with hydraulic throw out bearings may use this boot for the hydraulic lines to pass through as some measure of protection. However, the clutch fork boot will not provide an air tight seal.

  • Brand: Premier Quality Products
  • ASIN: B01KN0CD0G

NEW SWS CHEVY 621 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION COVER, THROWOUT BEARING, CLUTCH FORK, CLUTCH FORK BOOT & PIVOT BALL, STAMPED WITH #GM 3899621, FOR SBC & BBC 11" MANUAL CLUTCH APPLICATIONS

NEW SWS CHEVY 621 ALUMINUM BELLHOUSING, FLYWHEEL INSPECTION

Kit Includes: Southwest Speed Cast Aluminum Performance Bellhousing (# 650-3976) Factory Reproduction 3899621 Bellhousing 3899621 Stamped on Bellhousing Cast Aluminum Housing Works with GM transmissions with a 4.675" O.D. Bearing Retainer 1/2"-13 tapped hole for z-bar manual clutch linkage, if needed. Fits ALL Small Block and Big Block Chevrolet engines regardless of factory clutch size Southwest Speed Bellhousing Inspection Cover (# 650-3968) Replaces GM Part # 3843943 Includes 1/4" bolts to install inspection shield Exact Replica of the Original Southwest Speed Clutch Fork with Ball Retaining Spring (#650-4028) Replaces GM # 3892632 Exact Replica of the Original Southwest Speed Throwout Bearing (# 650-4035) Replaces GM # 19245400 Exact Replica of the original Designed to effectively reduce friction Made of high quality materials for long service life Southwest Speed Clutch Fork Boot (#650-3952) Replaces GM Part # 3993851 Exact Replica of the original Molded from E.P.D.M rubber for a snug fit that will last for years Southwest Speed Standard Clutch Fork Pivot Ball (#650-4018) Replaces GM Part # 3729000 Installs into bellhousing to support clutch fork 13/16"-16 Threads, 1 1/2" total length end to end Applications: 1964-1988 Chevy Chevelle, Malibu, Monte Carlo* 1959-1987 Chevy...

  • Color: 650-39765
  • Brand: Southwest Speed
  • ASIN: B01F7X3GXW

Machine Screw #6/32 x 5/16'' Long Pozi Flat Head Stainless Steel Lot of 50#4757 - Quality Assurance from JumpingBolt

Machine Screw #6/32 x 5/16'' Long Pozi Flat

Machine Screw #6/32 x 5/16'' Long Pozi Flat Head Stainless Steel Lot of 50 #4757 - Quality Assurance From JumpingBolt

  • Brand: JumpingBolt
  • ASIN: B07LDSM9H2
  • UPC: 765115194401

NEW 55-62 CHEVY BELLHOUSING LOWER DUST COVER FOR CARS WITH SBC BBC V-8 ENGINES & MANUAL TRANSMISSIONS, COVER REPLACES GM 3704923 & COMMONLY FITS #3733365 BELLHOUSINGS

NEW 55-62 CHEVY BELLHOUSING LOWER DUST COVER FOR

Brand New Southwest Speed Bellhousing Dust Cover that fits 1955-1962 Chevy Passenger Cars and Corvette's with V-8 Engines and Manual Transmissions (SWS Part # 650-3964). This Southwest Speed lower dust cover is a reproduction of the original GM # 3704923. This inspection shield fits the GM 3733365 11" bellhousing that is used on GM models with Big Block and Small Block engines equipped with an 11" clutch. This cover will look, fit, and perform just like original. This bellhousing took both an inspection cover and a dust cover. Features: Replaces GM Part # 3704923 Exact Replica of the Original Includes Four 1/4"-28 threaded bolts Fits GM Bellhousings with GM casting number 3733365 Fabricated from steel Factory Applications: Chevy: 1955-1962 Bel Air with V-8 Engines Except 409Cu. In. 1958-1962 Biscayne with V-8 Engines Except 409Cu. In. 1958-1961 Brookwood V-8 Engines Except 409Cu. In. 1955-1962 Corvette with V-8 Engines Except 409Cu. In. 1957-1958 Del Ray with V-8 Engines Except 409Cu. In. 1959-1960 El Camino with V-8 Engines Except 409Cu. In. 1958-1962 Impala with V-8 Engines Except 409Cu. In. 1959-1961 Kingswood with V-8 Engines Except 409Cu. In. 1955-1961 Nomad with V-8 Engines Except 409Cu. In. 1955-1957 150 with V-8 Engines Except 409Cu. In. 1955-1957 210 with V-8 Engin...

  • Color: 650-3964
  • Brand: Southwest Speed
  • ASIN: B01MU7A5KA

NEW 55-57 CHEVY 365 BELLHOUSING, CLUTCH BALL, & REAR ENGINE MOUNTING BRACKETS, STAMPED WITH #GM 3733365, DIRECT REPLACEMENT FOR SBC & BBC V-8 ENGINES WITH MANUAL TRANSMISSIONS, TRI-5 BEL AIR

NEW 55-57 CHEVY 365 BELLHOUSING, CLUTCH BALL, &

Brand New GM 365 Bellhousing Kit, produced by Southwest Speed (SWS Part # 650-3970, # 400-6902, # 650-4018). This kit includes the Engine/Bellhousing Mounts, the Clutch Ball, and the reproduction of the highly sought after 3733365 Chevy Bellhousing for 55-57 Chevy's with V-8 engines. This is an exact reproduction with a date code of November 19, 1955 cast in the part, along with the 3733365 part number Kit Includes: Southwest Speed Cast Performance Bellhousing (SWS # 650-3970) Factory Reproduction 3733365 Bellhousing Part number and build date cast exactly as the original bellhousing Part Number: 3733365 Build Date: November 19th, 1955 Accepts all standard GM Manual transmissions with 4.675" O.D. bearing retainer Fits all SBC and BBC engines, regardless of factory clutch size 3/8"-16 holes for frame mounting 1/2"-13 holes for transmission 3/8"-16 holes for clutch z-bar bracket 3/8"-16 holes for starter with top hole 3/8 clearance hole for thru-bolt 1/4"-20 holes for dust shields Southwest Speed Bellhousing Mounts (SWS # 400-6902) O.E. Replacement Mounts Fits Manual Transmissions Includes both sides Durable and longer lasting rubber mounts Connects the Chevy Bellhousing to the 1955-1957 Chevy Frame Fits Small Block and Big Block Chevy V-8 Engines, and Inline 6 Cylinder Engine...

  • Color: 650-3970_4018_6902
  • Brand: Southwest Speed
  • ASIN: B01N4KNECI

SoffSeal 2196 SoffSeal Bellhousing/Clutch Fork Boot GM

SoffSeal 2196 SoffSeal Bellhousing/Clutch Fork Boot

SoffSeal Bellhousing/Clutch Fork BootGM

  • Brand: SoffSeal
  • ASIN: B019XEU1Y8
  • UPC: 012854000457

Eckler's Premier Quality Products 57131174 Chevy Aluminum Bellhousing Clutch Cross Shaft Bracket

Eckler's Premier Quality Products 57131174 Chevy Aluminum Bellhousing

Replacement Bracket Must Be Flaten & Hole Re-Drilled For 1955 Mounts To Driver's Side Lower Bellhousing Using Existing Bolts Supports Inner Clutch Cross-Shaft (Z-Bar) On Cars That Do Not Have An Original Cast Iron Bellhousing Requires P/N 08-08 Pivot Stud (Sold Separately) Requires Use Of 1957 Cross Shaft Eckler's Select Series

  • Brand: Premier Quality Products
  • ASIN: B018G7NFDC

APDTY 140730 Clutch Fork Bellhousing Boot

APDTY 140730 Clutch Fork Bellhousing

APDTY 140730 Clutch Fork Bellhousing Boot

  • Color: Ready To Paint If Needed
  • Brand: APDTY
  • ASIN: B07D5GXKNC
  • UPC: 842955109175
Similar Bellhousing Boot Results
Bellhousing Boot Video Reviews

Rebuilding the Gimbal Housing and the bellows replacement PART 1

Bellhousing Boot

Follow me on Facebook http://www.facebook.com/profile.php?id=100002404806381

Tags: bravo,bellows,gimbal,marine,sea,ray,boat,how,to...

Pre Alpha / Alpha 1 Bellows and Shift Cable Change -- Andy's DIY

Bellhousing Boot

I had seen some other videos, but none that explained how to fasten U joint bellows onto bell hou...

Tags: Alpha 1 Bellows,Bellows,Alpha One Bellows,Boat ...

Mercruiser Alpha One Bellows, Gimble, Shift Cable Repair Part 2

Bellhousing Boot

In this Video, I remove the gimble bearing using tools loaned from Autozone (Part Number 27033 sl...

Tags: Alpha One,Mercruiser,Bellows,Shift Cable,Gimble...

Jeep CJ7 Bell Housing and Clutch Fork Removal

Bellhousing Boot

Another step in the process of removing the entire driveline of the CJ7. In this video we remove ...

Tags: Jeep,CJ7,Restoration,Driveline Removal,Bell Hou...

Mercruiser Bayliner Gimbal & Bellow Repair

Bellhousing Boot

This is how to replace the Gimbal Bearing and Repair the U Joint Bellow on your Mercruiser Alpha ...

Tags: Mercruiser Gimbal Repair,how to change gimbal,h...