Brushed Aluminum Sliding Dual Rear Brake Caliper Hanger KIT with Anodized BLACK Billet Aluminum 2-Piston Calipers for Motorcycles with 1" Axles and 11.5" Rotors Harley Chopper Bobber Cafe Racer

Brushed Aluminum Sliding Dual Rear Brake Caliper Hanger

Running a foot clutch? Want to eliminate your front brakes? Need to up the anti on your rear brakes? Look no further...This kit comes with TWO Calipers and a SLIDING billet caliper hanger designed to fit many different applications. 2-Piston Calipers (KIT Includes Two Calipers): • Aluminum calipers CNC machined from Billet Aluminum and Anodized Black. • Calipers come with brake pads, ground pin, pin spring, washers and a set screw. • Calipers feature square brake pads that slide freely on a center less ground pin to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Sliding Dual Caliper Hanger: • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum and given a brushed finish. • Comes with an oil impregnated 1" bushing. • Designed to be used with 11.5" rotors. • Kit can be installed on left or right hand side. • The mount itself is also available anodized BLACK. Dimensions: Caliper: Length= 3-3/8" Height= 2-7/8" Depth (Face to Rear)= 2-5/8" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers Hanger: Width= 9-3/4" Height= 6" Thickness= 1/2" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers. Finish: Calipers: Anodized Gloss Black. Also avai...

  • Brand: Billet Proof Designs
  • ASIN: B01BUA9GZI

Aluminum Front or Rear Brake Caliper Hanger Mount KIT w/ POLISHED Billet 2-Piston Caliper - With Lines, Fittings & Brake Stay for 3/4" Axle and 11.5" Rotor - Harley Chopper Bobber Cafe

Aluminum Front or Rear Brake Caliper Hanger Mount

You've got the "GO." Now it's time to up the ante on your "SLOW." This kit comes with a POLISHED 2-PISTON Caliper and a BRUSHED caliper hanger. 2-Piston Billet Caliper: (KIT Includes ONE Caliper) • Aluminum calipers CNC machined from Billet Aluminum and POLISHED (Also available in BLACK). • Caliper comes with brake pads, ground pin, pin spring, washers and set screw. • Caliper features brake pads that slide freely on ground pins to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Caliper Hanger: Brushed Aluminum • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum with a Brushed Finish. • Comes with an oil impregnated bushing for a 3/4" Axle. • Designed to be used with an 11.5" rotor (Front or Rear.) • Hanger can be installed on the left or right hand side. • Also available in Anodized Black (Please contact us for pricing and availability.) Included Accessories: • 4' Stainless Steel Braided Brake Line. • Chrome Banjo Bolt with Copper Crush Washers. • Chrome Banjo Fitting • 7" Stainless Steel Brake Stay Dimensions: Caliper Length = 3-7/8" Height = 2-7/8" Depth (Face to Rear) = 2-5/8" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers ...

  • Brand: Billet Proof Designs
  • ASIN: B01M5FX6K7

83mm 4-Piston Billet Aluminum Universal Motorcycle Rear Brake Caliper Cover Pump for Motorcorss Bike Mmotorbike Scooters Street Bike

83mm 4-Piston Billet Aluminum Universal Motorcycle Rear Brake

  • Brand: FXCNC Racing
  • ASIN: B07N1FKVS4

Polished Billet Aluminum Motorcycle 2-Piston Rear Brake Caliper WITH PADS - Harley Chopper Bobber Cafe Racerer WITH PADS - Harley Chopper Bobber Cafe Racer

Polished Billet Aluminum Motorcycle 2-Piston Rear Brake Caliper

Upgrade your stock brakes with this stealth, lightweight and compact 2- Piston brake Caliper! • CNC machined from 6061 billet aluminum to eliminate flex and reduce weight. • Caliper is then Polished to a briliant finish. • Comes with brake pads, ground pin, pin spring, washers and set screw! • Caliper features square brake pads that slide freely on a centerless ground pin to prolong pad life. • Can be set-up for a front or rear brake application. • Will require a caliper bracket for most applications (Available Separately). • Designed for use with DOT-5 brake fluid for optimum performance. ALSO AVAILABLE IN BLACK Dimensions: Length = 3-3/8" Height = 2-7/8" Depth (Face to Rear) = 2-5/8" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Finish: Polished Aluminum Fitment: A separate caliper bracket will need to be purchased for specific applications. Caliper can also be used with custom builds as long as the surrounding components will accommodate the above listed dimensions.

  • Brand: Billet Proof Designs
  • ASIN: B016DT57KO

Billet Aluminum Motorcycle 2-Piston Rear Brake Caliper WITH PADS - Anodized Black - Harley Chopper Bobber Cafe Racer

Billet Aluminum Motorcycle 2-Piston Rear Brake Caliper WITH

Upgrade your stock brakes with this stealth, lightweight and compact 2- Piston brake Caliper! • CNC machined from 6061 billet aluminum to eliminate flex and reduce weight. • Caliper is then HARD COAT ANODIZED in a durable Gloss Black finish. • Comes with brake pads, ground pin, pin spring, washers and set screw! • Caliper features square brake pads that slide freely on a centerless ground pin to prolong pad life. • Can be set-up for a front or rear brake application. • Will require a caliper bracket for most applications (Available Separately). • Designed for use with DOT-5 brake fluid for optimum performance. Dimensions: Length = 3-3/8" Height = 2-7/8" Depth (Face to Rear) = 2-5/8" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Finish: Anodized Gloss Black Fitment: A separate caliper bracket will need to be purchased for specific applications. Caliper can also be used with custom builds as long as the surrounding components will accommodate the above listed dimensions.

  • Brand: Billet Proof Designs
  • ASIN: B012TMEOGW

Power Stop KOE3167 Autospecialty By Power Stop 1-Click Daily Driver Brake Kits Front Incl. 13.78 in. OE Replacement Rotors w/Z16 Ceramic Scorched Brake Pads Autospecialty By Power Stop 1-Click Daily Driver Brake Kits

Power Stop KOE3167 Autospecialty By Power Stop 1-Click

Autospecialty By Power Stop 1-Click Daily Driver Brake Kits Front Incl. 13.78 in. OE Replacement Rotors w/Z16 Ceramic Scorched Brake Pads 1-Click Ordering Enables You To Put In Your Cart Either 2 Or 4Autospecialty OE Replacement Rotors And Matching Ceramic PadsBrake Kits Match The Right Pad And Rotor CombinationFor Faster StopsIncl. Power Stop Evolution Ceramic Brake PadsTo Provide More Pad Bite w/o Noise Or DustYou Will Spend Less Money Than A Dealer Charges To Stock Brakes

  • Brand: POWERSTOP
  • ASIN: B00AN5T8NM
  • UPC: 792088965004

Performance Machine 2-Piston Brake Caliper Kit for Springer Front Ends (LEFT or RIGHT Side) with a 3/4" Axle and a 11.5" Rotor - Includes Brake Stay - POLISHED Billet Aluminum - MADE IN THE USA

Performance Machine 2-Piston Brake Caliper Kit for Springer

Upgrade the brakes on your Springer front end with this stealth, lightweight 2-Piston kit from Performance Machine! This is a complete bolt-on kit with a caliper, mount and brake stay. MADE IN THE USA USING DOMESTIC MATERIAL Components are CNC machined from 6061 billet aluminum to eliminate flex and reduce weight. They are then POLISHED to a beautiful high-luster finish. Calipers are subjected to rigorous testing on the PM brake dyno to ensure optimum performance. Calipers are fully loaded with hardware and pads that slide freely on ground pins to prolong pad life. A Banjo Bolt is also included WITH crush washers. Designed for use with DOT-5 brake fluid for optimum performance. Designed for use with custom Springer Front Ends running a 3/4" axle and a 11.5" Front Rotor Dimensions: Caliper: Width = 2-5/8" Height = 2-3/4" Depth (Face to Rear) = 2-1/8" Mounting Holes = Clearance for a 5/16" bolt on 2" centers Weight = 14.3 ounces Mount: Width = 2-15/16" Height = 7-1/4 Weight = 1 Pound Finish: POLISHED Fitment: Designed for use with custom Springer Front Ends (LEFT OR RIGHT SIDE) running a 3/4" axle and a 11.5" Front Rotor.

  • Brand: Billet Proof Designs
  • ASIN: B07J5V11B1

Callahan CDS02959 FRONT 355mm + REAR 350mm D/S 5 Lug [4] Rotors [ Infiniti G37 Nissan 350Z 370Z ]

Callahan CDS02959 FRONT 355mm + REAR 350mm D/S

2008 Infiniti G37 - Sport Models 2009 - 2010 Infiniti G37 - Sport Package (Coupe, Sedan, Convertible) 355mm (14") Front Rotors 2011 - 2013 Infiniti G37 G37X- Sport Package or IPL Models (Coupe, Sedan, Convertible) 355mm (14") Front Rotors 2014 - 2015 Infiniti Q60 - Models w/355mm Front Rotors 2009 Nissan 350Z - Models with 4 Piston Front Calipers 2009 - 2018 Nissan 370Z - Models with Nismo Sport Package (Aluminum Calipers) Any Questions? Please send us a message or call us at (708) 325-3044.

  • Brand: Callahan Brake Parts
  • ASIN: B07P76JQZX

WILWOOD CLEAR ANODIZED BRAKE CALIPER, PAD, LINE KIT, 6 PISTON FRONT & 4 PISTON REAR,COMPATIBLE WITH 65-82 CHEVY CORVETTE C2,C3,CHEVROLET

WILWOOD CLEAR ANODIZED BRAKE CALIPER, PAD, LINE KIT,

Complete Brake Kit Includes: D8-6, 6 Piston Caliper, Pad, and Line Kit (Part # 140-11857) for Both Front Wheels D8-4, 4 Piston Caliper, Pad, and Line Kit (Part # 140-10790) for Both Rear Wheels Features calipers with a natural aluminum finish, protected by a durable clear-coat anodizing. Fits: 1965-1967 Chevrolet Corvette C-2 1968-1982 Chevrolet Corvette C-3 Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. The D8-6 & D8-4 calipers are a direct bolt-on replacement for the factory original calipers on all 1965-1982 Corvette's. Forged billet aluminum bodies, stainless steel pistons, & competition style high-temperature seals put an end to the rust, bore pitting, & seal failures that plague the OE caliper design. They provide low-maintenance performance, a huge weight savings, and high temperature reliability for street or track. D8-6 & D8-4 calipers mount in the stock location over stock rotors, use the original style D8 brake pads, and fit snugly inside most '67 or newer production wheels. Some wheels, including the 1965-66 OE "JK" code steel wheels and a few aftermarket replica alloy wheels, will require a 3/16" or wider wheel spa...

  • Color: Clear Anodized
  • Brand: Southwest Speed
  • ASIN: B00LH3S9MA

Chrome Ultima FRONT Brake Caliper Mount for Springer Front Ends 11.5" Rotor 3/4" or 1" Axle LEFT OR RIGHT Side (Paughco, DNA and Others) - Available with a 4-Piston Caliper - Harley Chopper Bobber

Chrome Ultima FRONT Brake Caliper Mount for Springer

Upgrade your Springer brakes with this Chrome beauty! Caliper Mount: CNC machined from 3/8" Thick 6061 Billet Aluminum and then Chrome Plated. Comes with stainless steel hardware/brake stay and all necessary spacers/shims. Direct Bolt-On for Springer Front Ends with a 3/4" or 1" Axle (Fits Paughco, DNA and other brands.) Fits LEFT or RIGHT hand side. Works with optional 4-Piston Ultima calipers as well as other brands (see below.) We have mounting kits available to fit many different Harley models. Dimensions: Caliper Mount: Length = 7" Width = 6" Thickness = 3/8" Weight = 1 Pound 2.6 ounces Finish: CHROME Fitment: This mount is a direct Direct Bolt-On for Springer Front Ends with a 3/4" or 1" Axle (Fits Paughco, DNA and other brands.) This mount is designed to work with Ultima 4-Piston Calipers (available for an additional 134.99.) Also works with the DNA 4-Piston and Billet 2-Piston Calipers offered on our site.

  • Brand: Billet Proof Designs
  • ASIN: B0719KFZPD

MGP Caliper Covers 32016SCW2YL Caliper Cover (Set of 4, Engraved Front and Rear: Style 2/Chrysler Wing, Yellow powder coat finish, black characters), 4 Pack

MGP Caliper Covers 32016SCW2YL Caliper Cover (Set of

MGP Caliper Covers are manufactured in the USA with T-6061 aerospace grade aluminum, TIG welded for strength, powder-coated for durability, and includes a patented stainless steel fastening system. Each set is engineered specifically for the brake caliper to ensure proper fit and finish. No adhesives, tape, or caliper modifications are required. Typical installation time is one hour from start to finish.

  • Color: Yellow
  • Brand: MGP Caliper Covers
  • ASIN: B01K9RSZD2
  • UPC: 889873199215

Black FRONT Brake Caliper Mount for Springer Front Ends LEFT OR RIGHT Side (Fits Paughco, DNA and other Springers) - Available with a 4-Piston Caliper - Harley Chopper Bobber

Black FRONT Brake Caliper Mount for Springer Front

Upgrade your Springer brakes with this Stealth beauty! Caliper Mount: • CNC machined from 3/8" Thick 6061 Billet Aluminum and then Anodized Black. • Comes with stainless steel hardware/brake stay and all necessary spacers/shims. • Direct Bolt-On for Springer Front Ends (Fits Paughco, DNA and other brands.) • Fits LEFT or RIGHT hand side. • Works with 4-Piston Ultima, DNA, Performance Machine and Billet Proof calipers as well as other brands (see below.) • We have mounting kits available to fit many different Harley models. Dimensions: Caliper Mount: Length = 7" Width = 6" Thickness = 3/8" Weight = 1 Pound 2.6 ounces Finish: BLACK Fitment: This mount is a direct Direct Bolt-On for Springer Front Ends (Fits Paughco, DNA and other brands.) This mount is designed to work with Ultima 4-Piston Calipers (available for an additional $134.99.) Also works with the DNA 4-Piston and Billet 2-Piston Calipers offered on our site.

  • Brand: Billet Proof Designs
  • ASIN: B072FR4T85

1965-82 Corvette Caliper Deluxe O-Ring Conversion Kit (All 4 Calipers)

1965-82 Corvette Caliper Deluxe O-Ring Conversion Kit (All

Our Corvette Brake Caliper O-ring Conversion Kits allow you to not only completely rebuild, but upgrade your existing brake calipers quickly, easily and affordably. Designed to save you down time, the cost of new calipers, core costs and the outrageous shipping costs of getting them to your door. With all the savings and upgrades these kits are truly a no brainer. Upgrade today to the trouble free O-ring Piston design that also gives you double the sealing power, virtually eliminating the common problematic leaking caliper syndrome.

  • Brand: CSSB
  • ASIN: B01LYOWQQO

Hope Tech 3 E4 Disc Brake Orange, Rear

Hope Tech 3 E4 Disc Brake Orange,

Smashing countless rock gardens while finessing your bike around tight ribbons of winding singletrack is the best kind of fun, but when you're thirty minutes into a rugged alpine descent with pumped arms and tired fingers, the last thing you want is to grab brakes and have them pull to the bar because of heat-induced brake fade. With the well-engineered Hope Tech 3 E4 Disc Brake you get consistent, reliable braking performance whether you put them on your trail bike, enduro rig, or dual-crown downhill sled. You may have seen the Hope Tech 3 E4 Disc Brakes out on the trail with their distinct colorways and the industrial appearance that resembles something you might find on a moto bike. They are sharp-looking brakes, beautifully machined and anodized, with color-matched rotors available to boot. As one might hope, they perform as well as they look, with smooth modulation and abundant power that won't fade halfway through your 5,000ft descent. If you're looking for that on/off feel with powerful bite right from the start, these are not your brakes. The Hope's do have a firm lever feel with a definite bite point, but the power comes on smooth at first, allowing more control of your braking force at the point of pad contact. This extra modulation lets you to fine-tune your speed with...

  • Color: Orange
  • Brand: Hope
  • ASIN: B073DLTYYV

Performance Machine 2-Piston Brake Caliper Kit for Springer Front Ends (LEFT or RIGHT Side) with a 3/4" Axle and a 10" Rotor - Includes Brake Stay - POLISHED Billet Aluminum - MADE IN THE USA

Performance Machine 2-Piston Brake Caliper Kit for Springer

Upgrade the brakes on your Springer front end with this stealth, lightweight 2-Piston kit from Performance Machine! This is a complete bolt-on kit with a caliper, mount and brake stay. MADE IN THE USA USING DOMESTIC MATERIAL Components are CNC machined from 6061 billet aluminum to eliminate flex and reduce weight. They are then POLISHED to a beautiful high-luster finish. Calipers are subjected to rigorous testing on the PM brake dyno to ensure optimum performance. Calipers are fully loaded with hardware and pads that slide freely on ground pins to prolong pad life. A Banjo Bolt is also included WITH crush washers. Designed for use with DOT-5 brake fluid for optimum performance. Designed for use with custom Springer Front Ends running a 3/4" axle and a 10" Front Rotor (PLEASE CHOOSE) Dimensions: Caliper: Width = 2-5/8" Height = 2-3/4" Depth (Face to Rear) = 2-1/8" Mounting Holes = Clearance for a 5/16" bolt on 2" centers Weight = 14.3 ounces Mount: Width = 2-15/16" Height = 7-1/4 Weight = 1 Pound Finish: POLISHED Fitment: Designed for use with custom Springer Front Ends (LEFT OR RIGHT SIDE) running a 3/4" axle and a 10" Front Rotor.

  • Brand: Billet Proof Designs
  • ASIN: B07J4V5MYF

Performance Machine 4-Piston Brake Caliper WITH PADS - POLISHED Billet Aluminum - MADE IN THE USA - Harley Chopper Bobber Cafe Racer

Performance Machine 4-Piston Brake Caliper WITH PADS -

Upgrade your brakes with this stealth, lightweight and compact 4-Piston brake Caliper! MADE IN THE USA USING DOMESTIC MATERIAL • CNC machined from 6061 billet aluminum to eliminate flex and reduce weight. • Caliper is then POLISHED to a beautiful high-luster finish. • Subjected to rigorous testing on the PM brake dyno to ensure optimum performance. • Comes fully loaded with brake pads, pins, and hardware. • A Banjo Bolt is also included WITH crush washers. • Caliper comes with brake pads that slide freely on ground pins to prolong pad life. • Designed for use with select PM Mounts AS WELL AS OUR CUSTOM CALIPER MOUNTS. • Designed for use with DOT-5 brake fluid for optimum performance. • We also offer 2-piston calipers from PM. Dimensions: Width = 5-1/2" Height = 2-9/16" Depth (Face to Rear) = 2-1/2" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Weight = 1 Pound 15.8 ounces Finish: POLISHED Fitment: A separate caliper bracket will need to be purchased for specific applications (Also Available). Caliper can also be used with any one of our custom caliper mounts.

  • Brand: Billet Proof Designs
  • ASIN: B07BZLTQ2G

Dorman - OE Solutions 919-111 Stainless Steel Brake Line Kit

Dorman - OE Solutions 919-111 Stainless Steel Brake

Direct replacement for a proper fit every time Durable metal construction No Special tools necessary for installation This part has undergone vehicle try-on testing to meet product standards

  • Color: Ready To Paint If Needed
  • Brand: Dorman
  • ASIN: B00QSLOO3O
  • UPC: 037495628181

NEW MCP REAR GO KART BRAKE KIT, FOR 1" AXLES WITH HUB, MASTER CYLINDER, CALIPER, 7.75 x .25" ROTOR

NEW MCP REAR GO KART BRAKE KIT, FOR

Brand New MCP Brake Systems Rear Brake Kit (MCP Part # 2106). These kits will fit many different models and styles of Racing Go Karts and Recreational Go Karts, as well as hundreds of motorsports applications. Kit Includes: Master Cylinder High performance aluminum cylinder with Black body 7/8" Bore Weighs less than 1 lb Brake Caliper Stylish Black body Features Two 1 3/8" Bore Pistons Exclusive design allows it to be adjusted for use with other rotor thicknesses (.15" to .25") Comes in 2 halves, which are then both mounted to a caliper bracket or brackets through the 2 bolt holes The bolt hole spacing is 2.25" center-to-center and they fit 3/8" bolts. Weighs only approximately 2 lbs Caliper Spacer .0625" Thick to account for the .250" Thick rotor Brake Rotor High quality steel construction 7.75" Diameter 0.25" (1/4") Thick Slotted to eliminate crucial rotating weight Weighs only approximately 2.2 lbs Brake Hub Fits 1" axles Billet aluminum construction with keyway Includes bolts and nuts Weighs only approximately 0.45 lbs. 80" of Brake Line 4 Ounces of Dot 5 High Performance Brake Fluid

  • Color: With 7.75" x 0.250" Rotor
  • Brand: Southwest Speed
  • ASIN: B00MAQMNJ8

Motorcycle Rear 84mm 2 Piston Brake Caliper Bracket/adapter For 220mm Brake Disc For Honda Yamaha Dirt Bike Electric Scooter

Motorcycle Rear 84mm 2 Piston Brake Caliper Bracket/adapter

-motorcycle rear brake caliper bracket -one pcs price.(not including the brake caliper) -cnc aluminum material.anodized color. -fit for p2axial brake caliper,84mm mounting. -fit for rear brake disc 220mm diameter. -for electric scooter,monkey or more models modify.

  • Color: Black
  • Brand: Gwyneth Store
  • ASIN: B07TRGV5F7

Billet Aluminum Front or Rear Brake Caliper Hanger Mount w/ BLACK Billet Aluminum 2-Piston Caliper for Motorcycles w/ 3/4" Axle and 11.5" Rotor Harley Chopper Bobber Cafe Racer

Billet Aluminum Front or Rear Brake Caliper Hanger

You've got the "GO." Now it's time to up the ante on your "SLOW." This kit comes with a BLACK 2-PISTON Caliper and a BRUSHED caliper hanger. 2-Piston Billet Caliper: (KIT Includes ONE Caliper) • Aluminum calipers CNC machined from Billet Aluminum and Anodized Black (Also available POLISHED). • Caliper comes with brake pads, ground pin, pin spring, washers and set screw. • Caliper features brake pads that slide freely on ground pins to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Caliper Hanger: Brushed Aluminum • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum with a Brushed Finish. • Comes with an oil impregnated bushing for a 3/4" Axle. • Designed to be used with an 11.5" rotor (Front or Rear.) • Hanger can be installed on the left or right hand side. • Also available in Anodized Black (Please contact us for pricing and availability.) Dimensions: Caliper: Length = 3-7/8" Height = 2-7/8" Depth (Face to Rear) = 2-5/8" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Hanger: Width = 5-7/8" Height = 5-3/4" Thickness = 1/2" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Finish: 2-Piston Calipers: Black Hanger: Brushed Alu...

  • Brand: Billet Proof Designs
  • ASIN: B01MFC2NZL

Billet Aluminum Front or Rear Brake Caliper Hanger Mount w/ POLISHED Billet Aluminum 2-Piston Caliper for Motorcycles w/ 3/4" Axle and 11.5" Rotor Harley Chopper Bobber Cafe Racer

Billet Aluminum Front or Rear Brake Caliper Hanger

You've got the "GO." Now it's time to up the ante on your "SLOW." This kit comes with a POLISHED 2-PISTON Caliper and a BRUSHED caliper hanger. 2-Piston Billet Caliper: (KIT Includes ONE Caliper) • Aluminum calipers CNC machined from Billet Aluminum and POLISHED (Also available in BLACK). • Caliper comes with brake pads, ground pin, pin spring, washers and set screw. • Caliper features brake pads that slide freely on ground pins to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Caliper Hanger: Brushed Aluminum • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum with a Brushed Finish. • Comes with an oil impregnated bushing for a 3/4" Axle. • Designed to be used with an 11.5" rotor (Front or Rear.) • Hanger can be installed on the left or right hand side. • Also available in Anodized Black (Please contact us for pricing and availability.) Dimensions: Caliper: Length = 3-7/8" Height = 2-7/8" Depth (Face to Rear) = 2-5/8" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Hanger: Width = 5-7/8" Height = 5-3/4" Thickness = 1/2" Mounting Holes = Clearance for a 3/8" bolt on 3-1/2" centers Finish: 2-Piston Calipers: Polished Hanger: Brushed Alu...

  • Brand: Billet Proof Designs
  • ASIN: B01MCY2EIV

Anodized Black Sliding Dual Rear Brake Caliper Hanger KIT with Anodized BLACK Billet Aluminum 2-Piston Calipers for Motorcycles with 3/4" Axles and 11.5" Rotors Harley Chopper Bobber Cafe Racer

Anodized Black Sliding Dual Rear Brake Caliper Hanger

Running a foot clutch? Want to eliminate your front brakes? Need to up the anti on your rear brakes? Look no further...This kit comes with TWO Calipers and an ANODIZED BLACK SLIDING billet caliper hanger designed to fit many different applications. 2-Piston Calipers (KIT Includes Two Calipers): • Aluminum calipers CNC machined from Billet Aluminum and Anodized Black. • Calipers come with brake pads, ground pin, pin spring, washers and a set screw. • Calipers feature square brake pads that slide freely on a center less ground pin to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Sliding Dual Caliper Hanger: • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum and anodized BLACK. • Comes with an oil impregnated 1" bushing. • Designed to be used with 11.5" rotors. • Kit can be installed on left or right hand side. • The mount itself is also available in Brushed Aluminum. Dimensions: Caliper: Length= 3-3/8" Height= 2-7/8" Depth (Face to Rear)= 2-5/8" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers Hanger: Width= 9-3/4" Height= 6" Thickness= 1/2" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers. Finish: Calipers: Anodized Gloss Bla...

  • Brand: Billet Proof Designs
  • ASIN: B01BUDAQ4A

Anodized Black Sliding Dual Rear Brake Caliper Hanger KIT with Anodized BLACK Billet Aluminum 2-Piston Calipers for Motorcycles with 1" Axles and 11.5" Rotors Harley Chopper Bobber Cafe Racer

Anodized Black Sliding Dual Rear Brake Caliper Hanger

Running a foot clutch? Want to eliminate your front brakes? Need to up the anti on your rear brakes? Look no further...This kit comes with TWO Calipers and a BLACK ANODIZED SLIDING billet caliper hanger designed to fit many different applications. 2-Piston Calipers (KIT Includes Two Calipers): • Aluminum calipers CNC machined from Billet Aluminum and Anodized Black. • Calipers come with brake pads, ground pin, pin spring, washers and a set screw. • Calipers feature square brake pads that slide freely on a center less ground pin to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Sliding Dual Caliper Hanger: • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum and anodized BLACK. • Comes with an oil impregnated 1" bushing. • Designed to be used with 11.5" rotors. • Kit can be installed on left or right hand side. • The mount itself is also available Brushed Aluminum. Dimensions: Caliper: Length= 3-3/8" Height= 2-7/8" Depth (Face to Rear)= 2-5/8" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers Hanger: Width= 9-3/4" Height= 6" Thickness= 1/2" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers. Finish: Calipers: Anodized Gloss Black. ...

  • Brand: Billet Proof Designs
  • ASIN: B01BUCQUYQ

Brushed Aluminum Sliding Dual Rear Brake Caliper Hanger KIT with Anodized BLACK Billet Aluminum 2-Piston Calipers for Motorcycles with 3/4" Axles and 11.5" Rotors Harley Chopper Bobber Cafe Racer

Brushed Aluminum Sliding Dual Rear Brake Caliper Hanger

Running a foot clutch? Want to eliminate your front brakes? Need to up the anti on your rear brakes? Look no further...This kit comes with TWO Calipers and a SLIDING billet caliper hanger designed to fit many different applications. 2-Piston Calipers (KIT Includes Two Calipers): • Aluminum calipers CNC machined from Billet Aluminum and Anodized Black. • Calipers come with brake pads, ground pin, pin spring, washers and a set screw. • Calipers feature square brake pads that slide freely on a center less ground pin to prolong pad life. • Designed for use with DOT-5 brake fluid for optimum performance. Sliding Dual Caliper Hanger: • The unique Sliding Caliper Hanger allows for fitment on MANY different applications. • CNC Machined from 6061 Billet Aluminum and given a brushed finish. • Comes with an oil impregnated 3/4" bushing. • Designed to be used with 11.5" rotors. • Kit can be installed on left or right hand side. • The mount itself is also available anodized BLACK. Dimensions: Caliper: Length= 3-3/8" Height= 2-7/8" Depth (Face to Rear)= 2-5/8" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers Hanger: Width= 9-3/4" Height= 6" Thickness= 1/2" Mounting Holes= Clearance for a 3/8" bolt on 3-1/2" centers. Finish: Calipers: Anodized Gloss Black. Also av...

  • Brand: Billet Proof Designs
  • ASIN: B01BU97OF8
Similar Aluminum 2 Piston Rear Caliper Results
Aluminum 2 Piston Rear Caliper Video Reviews

How to Clean, Repair and Rebuild Motorcycle Brake Calipers

Aluminum 2 Piston Rear Caliper

In this video we'll show you how to clean and rebuild the brake calipers on your motorcycle. Clea...

Tags: motorcycle,brake,caliper,clean,rebuild

Brake Caliper Mounting & Adjustment - Dual Pivot

Aluminum 2 Piston Rear Caliper

How to install and adjust dual pivot brake calipers, as well as dual symmetric brake calipers. ...

Tags: Bikes,Bike Maintenance,Bike Repair,Bicycles,Bic...

How to rebuild rear brake caliper - VW Audi Skoda Seat - New piston and seals (COMPLETE GUIDE)

Aluminum 2 Piston Rear Caliper

This video is showing how you can handle with seized brake caliper, in this particular case we ha...

Tags: brake caliper,Audi,VW,rebuild,automotive,garage...

How to Shave and Paint Your Brake Calipers

Aluminum 2 Piston Rear Caliper

Previous Video ▶︎ https://youtu.be/KjgyrEo5GcU ⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯⌯...

Tags: milmast,milan mastracci,ontario,canada,automoti...

B5 Rear Caliper Piston Removal

Aluminum 2 Piston Rear Caliper

1999 B5 Passat FWD Lucas rear caliper rebuild (removing the piston without hydraulic or pneumatic...

Tags: YouTube Editor