Pusher Intake Manifold 7.3L Powerstroke Gloss Blue

Pusher Intake Manifold 7.3L Powerstroke Gloss

The Pusher 7.3L Powerstroke manifold splits the poorly designed one piece factory manifold in two pieces. This drastically reduces the heat transfer between the hot compressed air exiting the turbo to the inlet V of intercooled air at the heads. The factory heater coil is deleted for increased flow as well. This manifold comes standard with instructions, two 1/8 inch NPT ports and corresponding port plugs. For an additional charge, select powdercoating colors are available on this manifold.

  • Color: Gloss Blue
  • Brand: Pusher Intakes
  • ASIN: B00OZWRA20

aFe Filters 46-60029 Blade Runner Intercooler Tube Upgrade

aFe Filters 46-60029 Blade Runner Intercooler Tube

The aFe Bladerunner Turbo Inlet Manifold increases performance to your Duramax by 23hp and 57lbs x ft. torque while increasing air flow 73-percent over the factory turbo inlet. The Bladerunner turbo inlet manifold also improves turbo spool up times and lowers exhaust gas temperature (EGTs). This unit is constructed out of durable A356-T6 aluminum and uses the patented multi-direction vane (MDV) technology to help guide air through the manifold to your turbo. This kit comes complete with turbo inlet manifold and all hardware needed for an easy installation.

  • Brand: aFe Power
  • ASIN: B003CSN2HA
  • UPC: 802959460474

aFe Blade Runner Intake Manifold for 9.5-03 Ford 7.3L Powerstroke

aFe Blade Runner Intake Manifold for 9.5-03 Ford

The new Bladerunner manifold kit for the popular 7.3L Power Stroke is constructed of cast A356-T6 aluminum and features the patented MDV (Multiple Directional Vane) technology which helps increase intake velocity for increased flow, lower EGT's, improved MPG and faster turbo spool up times. This system contains one Bladerunner intake manifold which outflows the factory unit by 18% and one Bladerunner turbo outlet manifold that outflows the factory unit by 15%. This is a direct bolt-on system with all hardware and brackets requires for an easy installation. These manifolds also come with 1/8" NPT ports for nitrous, gauges or testing probes.

  • Brand: aFe
  • ASIN: B007I4M1SK
  • UPC: 796940305823

08-10 Ford F250/F350 6.4L aFe Blade Runner Intercooler

08-10 Ford F250/F350 6.4L aFe Blade Runner

This brand new Bladerunner Intercooler represents the next generation of intercoolers. The Bladerunner intercoolers utilize a 3.15" bar and plate design that is 15% larger than the competitors and outflows OE style tube and fin core designs by 74%! This design results in quicker and more measurable heat dissipation. The unique Bladerunner end tanks are constructed out of 3/16' TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for maximum cooling. Every Bladerunner Intercooler is tested at 200psi which is perfect for high boost applications. In recent testing the Bladerunner intercooler produced a 200 degree temperature drop at the intercooler and a 100 degree EGT (Exhaust Gas Temperature) drop as well as increasing air flow by 74% over stock. This intercooler also outflowed the Banks unit by 25%. Don't waste your time and money on modified factory intercoolers. Invest in the aFe Bladerunner intercooler, the most sophisticated intercooler design on the planet.

  • Brand: aFe
  • ASIN: B007I4XGFW

AFE Filters 46-40114 Blade Runner Ported Ductile Iron Exhaust Manifold

AFE Filters 46-40114 Blade Runner Ported Ductile Iron

Outflows the factory manifold by 12%, improving performance and throttle response. Compatible with factory y-pipe for easy installation. Performance cast manifold with header-style flow path. Durable ductile iron construction outlasts factory manifold. Easy to install.

  • Brand: aFe
  • ASIN: B07DLVDVLX
  • UPC: 802959464663

aFe Blade Runner Intake Manifold For 05-07 Ford F250/F350 6.0L

aFe Blade Runner Intake Manifold For 05-07 Ford

Stock intake manifolds have sharp bends and corners. As air flows around these corners, dead air zones are created. These dead air zones choke down the air and restrict airflow to your engine.

  • Brand: aFe
  • ASIN: B007I4JKEI
  • UPC: 608067734762

aFe Power Magnum FORCE 51-10792 Ford Diesel Truck 94-97 V8-7.3L (td) Performance Intake System (Dry, 3-Layer Filter)

aFe Power Magnum FORCE 51-10792 Ford Diesel Truck

The aFe Power Stage 2 cold air intake produces up to 8HP and up to 17 lbs. x ft. torque while outflowing the factory intake by up to 117%. This intake is a highly engineered heat-shielded air box with a one-piece intake tube. Handling filter duties is the PRO DRY S performance air filter that features 3-layers of progressively finer mesh synthetic "oil-free" media. The PRO DRY S filter is constructed with 100% polyurethane for long life and multiple cleaning cycles. The heat-insulating, molded plastic intake tube is engineered for improved volumetric efficiency and maximum performance while lowering Intake Air Temps (I.A.T). Utilizing factory mounting points, this system provides a hassle free installation. Durable Heat Shield: A one-piece powder-coated heat-shield is used to keep the air intake charge cool and dense. 5-1/2" 360 Degree Air Filter: A cone 360 degree round air filter is used for maximum filtration (99.2% efficient) and convenience (requires no oils to clean). The PRO DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane for long life and multiple cleaning cycles. Hassle-Free Installation: aFe has developed this intake to provide a hassle-free installation that utilizes all fac...

  • Brand: aFe Power
  • ASIN: B001ABJQ3K
  • UPC: 000655146498

AFE 46-60029 Blade Runner

AFE 46-60029 Blade

Stock intake manifolds have sharp bends and corners. As air flows around these corners, dead air zones are created. These dead air zones choke down the air and restrict airflow to your engine.

  • Brand: aFe
  • ASIN: B003XOIZI4
  • UPC: 608067734861

aFe Power 46-20134-B BladeRunner Intercooler Hot and Cold Side Tube with Coupling and Clamp Kit

aFe Power 46-20134-B BladeRunner Intercooler Hot and Cold

Features Upgrade tubes for both hot and cold side of the intercooler 3" mandrel-bent powder-coated stainless tube for heat resistance and long-life Includes high-temp couplings and stainless steel t-bolt clamps Couplings constructed out of heavy-duty high-temp 5-PLY polyester for heat-resistance and durability Constant tension T-bolt clamps for a tight and secure installation. Uses all factory mounting locations and includes all necessary hardware for a hassle-free installation. The intercooler tubes are constructed of 3" mandrel bent stainless steel tubing for maximum flow then powder-coated wrinkle-black for heat and corrosion resistance. The Smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, Spring loaded, t-bolt clamps for a leak-free seal and heavy-duty 5-PLY couplings for strength. Fits OEM or aFe's upgraded intercooler. Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style. This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

  • Brand: aFe Power
  • ASIN: B00M03S048
  • UPC: 802959462539

aFe Power 46-20139-B BladeRunner 3" Intercooler Tube Cold Side with Coupling and Clamp

aFe Power 46-20139-B BladeRunner 3" Intercooler Tube Cold

Features Outflows stock I/C tube 3" mandrel-bent powder-coated wrinkle-black stainless tube Bolt-on Kit fits OEM intercooler High quality constant tension T-bolt clamps and heavy-duty 5-ply couplings Included for a perfect fit and strength Lower EGT's Cold-side tube upgrade. The intercooler tube is constructed of 3" mandrel bent stainless steel tubing for maximum flow then powder-coated for heat and corrosion resistance. The Smooth bends allow for low turbulence, increasing horsepower, torque and lowering EGT's. Utilizes the factory mounting locations to provide stability for a hassle-free installation. Includes constant tension, Spring loaded, t-bolt clamps for a leak-free seal and heavy-duty 5-PLY couplings for strength. Fits OEM intercooler. Unique stainless steel laser-cut aFe Power logo plate is welded-on for an aggressive style. This system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.

  • Brand: aFe Power
  • ASIN: B00M03RXL4
  • UPC: 802959462171

aFe 46-40032 BladeRunner Ductile Iron Exhaust Manifold for Dodge Diesel Trucks L6 5.9L

aFe 46-40032 BladeRunner Ductile Iron Exhaust Manifold for

Eliminate the costly exhaust manifold cracks prevalent in the factory exhaust manifold. The aFe Blade Runner exhaust manifold for the popular 5.9 liter Dodge RAM Cummins (24 volts) sets a new standard. In recent testing, this exhaust manifold outflowed the factory exhaust manifold by 50 percent improving performance and throttle response. The thick wall (0.25 inch versus 0.15 inch) flange design increases strength eliminating warping and cracking. The matched ports and a merged runner design reduces exhaust backpressure, maximizing exhaust flow. Once you install this awesome exhaust manifold, you will feel improved turbo spool up times, improved throttle response and increased performance. One piece construction: This manifold is constructed out of durable cast ductile iron with a reinforcing rib for maximum strength along the flange and ultra-thick wall flange at the port. Multiple auxiliary ports: Two EGT (exhaust gas temperature) probe ports are supplied for easy installation of gauges or testing equipment. Hassle free installation: All necessary hardware is included for a hassle-free installation. Legal in California only for racing vehicles which may never be used upon a highway.

  • Brand: aFe Power
  • ASIN: B00B0LGAK2
  • UPC: 802959461235

aFe 46-20062 BladeRunner Intercooler for Dodge Diesel Trucks L6 5.9L

aFe 46-20062 BladeRunner Intercooler for Dodge Diesel Trucks

This Blade Runner intercooler represents the next generation of intercoolers. The Blade Runner intercoolers utilize a 3 inch bar and plate design that is 37 percent larger than stock and outflows OE style tube and fin core designs by 31 percent end tanks: The unique Blade Runner end tanks are constructed out of 3/16 inch TIG welded aluminum plate tanks that incorporate three multi-directional vanes. Multi-directional vane technology: The Blade Runner MDV technology is used to direct hot air flow through the entire intercooler core. This allows for greater cooling than competitors units. 3 inch bar and plate core design: The use of the bar and plate core design allows for greater airflow and increased heat dissipation over the much smaller tube and fin design used by the OEM. Multiple auxiliary ports: Four tapped 1/8 inch ports are supplied on the intercooler tubes for easy installation of gauges or nitrous oxide systems. Billet aluminum inlet/outlets: Each Blade Runner intercooler uses billet aluminum inlets and outlets for superior strength and durability. This intercooler also features 3 inch inlet/outlet connections mated to oversized boost tubes, included. Tig-welded: 100 percent TIG-welded by certified craftsmen for race proven strength and durability. TIG-Welding provides t...

  • Brand: aFe Power
  • ASIN: B00B0LGAPM
  • UPC: 802959460436

aFe (46-11012) BladeRunner 3.5" Intake Manifold with Intercooler Tube for Dodge Diesel Trucks L6-5.9L

aFe (46-11012) BladeRunner 3.5" Intake Manifold with Intercooler

The Blade Runner intake manifold represents the next generation in intake manifold design. The Blade Runner intake manifold uses a unique MDV (multiple directional vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. The Blade Runner comes with up to 5 ports for nitrous injection, gauges and other accessories used by hardcore enthusiasts. In recent testing the Blade Runner intake manifold outflowed the factory intake by 68 percent. This intake is specifically designed to provide increased intake volume and air velocity. To increase air velocity, the Blade Runner intake manifold uses aFe Power's patented MDV (multiple directional vane) technology. By splitting the air into multiple streams, the air flow speeds up increasing performance and improving throttle response. A356-T6 aluminum construction, the Blade Runner intake manifold is constructed of lightweight A356-T6 aluminum for light weight and high strength. A gloss black powder coat finish is added for styling and extra durability. Five auxiliary ports, this intake manifold comes with 5 auxiliary port pads (2-tapped at 1/8 inch NPT) for use...

  • Brand: aFe Power
  • ASIN: B00BRTQR46
  • UPC: 802959461471

aFe Power 46-52001 Radiator

aFe Power 46-52001

This Blade Runner Street Series Radiator keeps your 2007-2018 Jeep Wrangler JK running cooler, longer. 100% aircraft-grade aluminum, a 1-1/2in tube and fin core design, and thicker 1/8in aluminum fabricated end tanks handle rock-crawling and street hauling. Oversized 1-1/2in Tube and Fin Core - Blade Runner Street Series Radiators feature a thicker tube and fin core, which provides greater heat dissipation and better coolant flow than the factory radiator for optimum cooling efficiency. Flow and Performance - With aircraft-grade aluminum construction and a larger core, Blade Runner Street Series Radiators offer increased coolant capacity over stock to help maintain cooler operating temperatures longer. End Tanks - The fabricated end tanks are constructed out of 1/8in aluminum plates for strength and durability. TIG-Welded - 100% TIG-welded for race proven strength and durability. Brass Drain Valve. Perfect Fit. Custom Appearance.

  • Brand: aFe Power
  • ASIN: B07KNF19H3
  • UPC: 802959465653

aFe (46-11011) BladeRunner 3.5" Intake Manifold for Dodge Diesel Trucks L6-5.9L

aFe (46-11011) BladeRunner 3.5" Intake Manifold for Dodge

The Blade Runner intake manifold represents the next generation in intake manifold design. The Blade Runner intake manifold uses a unique MDV (multiple directional vane) technology to guide the air through the manifold maximizing air flow. Constructed out of cast A356-T6 aluminum and uses a proprietary internal bolt design to help increase the flow and provide a solid seal void of leaks or deformities. The Blade Runner comes with up to 5 ports for nitrous injection, gauges and other accessories used by hardcore enthusiasts. In recent testing the Blade Runner intake manifold outflowed the factory intake by 68 percent. This intake is specifically designed to provide increased intake volume and air velocity. To increase air velocity, the Blade Runner intake manifold uses aFe Power's patented MDV (multiple directional vane) technology. By splitting the air into multiple streams, the air flow speeds up increasing performance and improving throttle response. A356-T6 aluminum construction: The Blade Runner intake manifold is constructed of lightweight A356-T6 aluminum for light weight and high strength. A gloss black powder coat finish is added for styling and extra durability. Five auxiliary ports, this intake manifold comes with 5 auxiliary port pads (2-tapped at 1/8 inch NPT) for use...

  • Brand: aFe Power
  • ASIN: B00BRTQRA0
  • UPC: 802959461464

aFe 46-20071 Intercooler

aFe 46-20071

This brand new Blade runner Intercooler represents the next generation of intercoolers. The Blade runner intercoolers utilize a 3.15 inch bar and plate design that is 15 percent larger than the competitors and outflows OE style tube and fin core designs by 74 percent. This design results in quicker and more measurable heat dissipation. The unique Blade runner end tanks are constructed out of 3/16' TIG welded aluminum plate tanks that incorporate three multi-directional vanes that efficiently direct air flow through the entire core for max cooling. Every Blade runner Intercooler is tested at 200psi which is perfect for high boost applications.

  • Brand: aFe Power
  • ASIN: B004KLQQGW
  • UPC: 802959460443
Similar Afe Blade Runner Results
Afe Blade Runner Video Reviews

6.7l Cummins AFE Bladerunner intake manifold unboxing

Afe Blade Runner

Tags: Intake

7.3 powerstroke afe bladrunner intake

Afe Blade Runner

This is the AFE Bladerunner spider intake manifold to replace the stock one. Not to be confused w...

Tags: f250,f350,diesels,ford trucks,7.3 powerstroke,i...

AFE bladerunner hot cold intercooler unbox.. EZLYNK SOTF install

Afe Blade Runner

Tags: EZLYNK,AFE,AFE intercooler,AFE bladerunner,f250...

Turning up the fuel and putting a new turbo on a 12 valve cummins!

Afe Blade Runner

Installed a new AFE blade runner turbo and a #8 fuel plate and tuned the afc on the pump! Rusty...

Tags: cold start,lope,straight pipe,rollin coal,5 spe...

AFE Bladerunner Kit for 6.7 Powerstroke

Afe Blade Runner

This is an unboxing video and review of the AFE Bladerunner Intercooler upgrade kit for Ford 6.7 ...

Tags: Ford,6.7,Powerstroke,6.7 Powerstroke,Intercoole...