TP-LINK TL-PoE150S PoE Injector Adapter, IEEE 802.3af Compliant, up to 100 Meters (325 Feet)

TP-LINK TL-PoE150S PoE Injector Adapter, IEEE 802.3af Compliant,

View larger The PoE Injector TL-POE150S fully complies with IEEE 802.3af standard, and can work with all IEEE 802.3af compliant PDs (Powered Devices) and PoE Splitter such as TP-LINK’s TL-POE10R, to expand your network to where you wish to place PDs but has no power outlet. PDs include but are not limited to Access Point, IP Camera, VoIP Phones. How It Works (1) For 802.3af compliant Powered Devices On the input side, connect the injector to its power adapter and a data source such as a router or a switch. On the output side, connect the injector to a Powered Device such as an access point, VoIP phone, or a PoE camera. (2) For Non-PoE Devices On the input side, connect the injector to its power adapter and a data source such as a router or a switch. On the output side, connect the injector to a splitter, and then to a non-PoE device. Specifications 2 10/100/1000M Ethernet ports 15.4W power output Deliver power up to about 328.1 feet(100 meters) Support 100-240V voltage input Package Contents TL-POE150S PoE Injector Power Cord Ethernet Cable User Guide Interface Available: For POE200A:, 1 x 10/100Mbps Auto-Negotiation/Auto MDI/MDIX RJ45 LAN port, 1 x 10/100Mbps Auto-Negotiation/Auto MDI/MDIX RJ45 PSE port, 1 48VDC power input port, For POE200B:, 1 x 10/100Mbps...

  • Color: Black
  • Brand: TP-LINK
  • ASIN: B001PS9E5I
  • UPC: 845973030506

Ubiquiti POE-48-24W 48VDC 0.5A Output Power over Ethernet Adapter

Ubiquiti POE-48-24W 48VDC 0.5A Output Power over Ethernet

Ubiquiti POE-48-24W 48VDC 0.5A Output Power over Ethernet Adapter

  • Brand: Ubiquiti Networks
  • ASIN: B004EK9ODG
  • UPC: 609728683658

WT-GPOE-4-48v48w Gigabit Passive PoE 4 Port Power Over Ethernet Injector with 48 watts for 802.3af Devices, Includes 48 Volt Power Supply

WT-GPOE-4-48v48w Gigabit Passive PoE 4 Port Power Over

Add gigabit PoE to any Switch.This device combines power with data from your network switch or router on to the Ethernet cable via Mode A (pins 1,2 and 3,6). All devices receive the same voltage (48v). The available power for all devices combined is 48 watts. To calculate power budget, please check device specs for power needs.Features Compatible with your 10/100/1000 Gigabit network switch or router - 1:1 ratio for LAN to POE ports Supports up to 4 devices with 48 watts total power Use to power IEEE 802.3af devices (Or devices labeled "12v,PoE" like Hikvision cameras) Shielded RJ45 ports - 4 data (LAN) in, 4 Data + Power (PoE) out Extend power up to 328 ft (100 meters) Passive "always on" 48v power on Mode A Power supply included 48 volts DC, 1 amp, 48 watts 110 to 220 volt AC operation 90% efficient UL, CE and FCC approved Applications: IP phones like Polycom, Cisco, Yealink WiFi Access points IP Cameras IEEE 802.3af Devices Devices labeled "12 volt, POE" (please see our video on this topic) To power PoE Texas' USB, 5v and 12v PoE splitters Other products from PoE Texas AT-4-56v120w - 4-port active injector for 802.3at GPOE-8A-48v60w - 8-Port version with 60 watts of available power AT-8-56v120w - 8-Port version with Active negotiation for 802.3at POE-8-...

  • Color: Black
  • Brand: WiFi-Texas
  • ASIN: B015S8397E
  • UPC: 752423138395

BV-Tech Single Gigabit Port Power over Ethernet Plus PoE+ Injector - 30W - 802.3at - up to 100 meters (325 Feet) - BV-I100GH

BV-Tech Single Gigabit Port Power over Ethernet Plus

The POE-I100GH is an economical, single port, high-power 10/100/1000Mbps PoE Injector. It supplies up to 30W of remote power for IP cameras, wireless access points, VoIP phones, and other devices. The POE-I100H allows you to add additional ports to your PoE switch using a Cat-5 cable (sold separately). It complies with IEEE 802.3at/aft PoE standards and can work with 10/100/1000Mbps Base-T networking devices.

  • Color: Black
  • Brand: BV-Tech
  • ASIN: B00B4H00EO
  • UPC: 639767842105

Ubiquiti Networks PoE 48V 0.5A GigEthernet (POE-48-24W-G)

Ubiquiti Networks PoE 48V 0.5A GigEthernet

Ubiquiti POE-48-24W-G Power over Ethernet Injector - 110 V AC, 220 V AC Input - 48 V DC, 500 mA Output - 1 Ethernet Input Port(s) - 1 Ethernet Output Port(s) - 24 W

  • Brand: Ubiquiti Networks
  • ASIN: B00HXT8MNI
  • UPC: 810354021220

WS-GPOE-12-48v120w gigabit 12 Port Power Over Ethernet Injector Passive POE for 802.3af Devices

WS-GPOE-12-48v120w gigabit 12 Port Power Over Ethernet Injector

Add PoE to any switch Replace up to 12 individual injectors with this single 10/100/1000 POE midspan Features Extend power up to 328 ft or 100 meters Rack Mounted PoE injector 12 shielded RJ45 ports with Data + Power out Power per port output of 650 mA 12 shielded RJ45 ports Data in that connect to your network switch Two 2.1mm x 5.5mm DC power inputs - Mode A (pins 1,2 3,6) or Mode B (pins 4,5 7,8) options LED power status indicators LED power usage status per 4 port banks 10/100/1000 Mbps Gigabit Data 48 volt 120 watt UL certified power supply, 100-240v, 50/60 hz Compatible Devices: IP phones like Polycom, Cisco, Yealink WiFi Access points IP Cameras 802.3af devices Included in the box: 48-volt, 120-watt UL/CE/FCC certified power supply 12 Port Midspan PoE Injector NOTE: All devices receive the same voltage (48 volts) and share power up to 120 watts. Check your device specifications for power needs, most IP phones require under 4 watts. Other products from PoE Texas We offer 10/100 and gigabit midspan injectors, PoE switches, and PoE splitter/converters for non-PoE devices. WS-GPOES-8-7-48v60w: 8 port gigabit switch WS-POE-8-48v60w: 8-port midspan injector with 10/100 speed data WS-GPOE-16-48v120w: 16-port gigabit midspan injector WS-POE-12-48v120w: 12-port mids...

  • Color: Black
  • Brand: WiFi-Texas
  • ASIN: B00ENUHQEQ
  • UPC: 752423137831

TRENDnet Gigabit Power Over Ethernet Plus (PoE+) Injector,Converts Non-PoE Gigabit to PoE+ or PoE Gigabit, Network Distances up to 100 M (328 Ft.), TPE-115GI

TRENDnet Gigabit Power Over Ethernet Plus (PoE+) Injector,Converts

TRENDnet’s Gigabit PoE+ Injector, model TPE-115GI, combines electrical power with a Gigabit network connection to produce a Gigabit PoE+ signal. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE and PoE+ devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE or PoE+ device up to 100 meters (328 ft.) away. PoE Supplies a PoE device with PoE (15.4W) or PoE+ (30W) power. Installation Flexibility Wall-mountable design accommodates most installations scenarios. Gigabit SpeedsFull Duplex 2Gbps Ethernet speeds with this PoE+ injector. Package Contents:- TPE-115GI- Quick Installation Guide- Power cord

  • Brand: TRENDnet
  • ASIN: B00BK4W8TQ
  • UPC: 782386486103

POE-8-48v60w | 8-Port Passive 10/100 Power Over Ethernet Midspan Injector for IP Cameras, VOIP Phones or Access Points with 48 Volts, 60 Watts Total Power

POE-8-48v60w | 8-Port Passive 10/100 Power Over Ethernet

Our Best Selling PoE Injector! Use this reliable Passive PoE midspan to instantly add power to your existing network switch or router. The POE-8-48v60w provides power on the spare data wires (Mode B) of the Cat5, Cast5e or Cat6 Ethernet cable. Passive "always on" power means that all devices will receive the same voltage (48v). The included power supply provides 60 watts total available power for all devices combined. Consumption varies per device and model - Please check device specs for power needs to ensure that you have adequate wattage to support all 8 ports.* NOTE: This is not a switch - you use it to add PoE to any switch or router Product Features Proven reliability since 2011 Extends power up to 328 ft or 100 meters 10/100 Mbps Fast Ethernet data rate Adds PoE to any network switch or router Power up to 8 Cameras, WiFi AP's or IP Phones with 60 watts total combined power Power any 802.3af device Power any "12v,PoE" device (see our video for info) Designed for wall mount installation 8 data in, 8 data + PoE out Passive PoE - Power is on all the time 2.1mm DC connector Power Supply Included 48 volts DC, 1.25 amps, 60 watts 110 to 220 volt AC operation 90% efficient UL, CE and FCC approved Reversing cable for Cisco 7940 and 7960 is included Other products fro...

  • Color: Black
  • Brand: WiFi-Texas
  • ASIN: B0086SQDMM
  • UPC: 609788692362

iCreatin Wall Plug POE Injector With 48v Power Supply 802.3af for Most Cisco / Polycom / Aastra Phones and More

iCreatin Wall Plug POE Injector With 48v Power

" Note: This PoE injector only used for 10/100Mbps network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 500mA and high voltages exceeding 50Vdc. Specifications 2 RJ45 Ethernet ports 48V 0.5A power out...

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00NRGJCM6
  • UPC: 701936097927

iCreatin 48V POE Injector Adapter Power supply,10/100Mbps IEEE 802.3af Compliant, Up to 100M (328 Feet), for Most Cisco / Polycom / Aastra Phones and more

iCreatin 48V POE Injector Adapter Power supply,10/100Mbps IEEE

" Note: This PoE injector only used for 10/100Mbps network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 400mA and high voltages exceeding 50Vdc. Specifications 2 RJ45 Ethernet ports 48V 0.4A power output, Power fee...

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00NRG4AMS
  • UPC: 701936097910

AT-4-48v60w | Active 802.3at 4-Port Power Over Ethernet Injector with 48 Volt 60 Watt Power Supply

AT-4-48v60w | Active 802.3at 4-Port Power Over Ethernet

Product Features Add gigabit PoE to any 10/100/1000 capable network switch or router Injects power and data on to one Ethernet cable Power up to 4 devices with 60 watts combined total power Mix and match devices IEEE 802.3at compliant for Class 4 PoE Devices 4 data in, 4 Data + PoE out ports Extends power up to 328 ft (100 meters) Active autonegotition - power is off until a compatible device is connected 48 volt, 60 watt power supply included - 110 to 220 volt AC operation - 90% efficient - UL, DoE, CE and FCC listed Description This device provides power and data over one Ethernet cable using pins 1,2 and 3,6. Active autonegotion protects non-PoE devices and will provide data only if plugged in. If power is needed, your powered device will receive 48v. The AT-4-48v60w can support a combined power total of 60 watts for all devices on all 4 ports with a maximum output of 30 watts per port. Check device specifications for power needs. For up to 120 available watts see the AT-4-48v120w or the AT-4-56v120 for up to 120 watts of power. Applications: WiFi Access points like Cisco, Meraki, Aruba 802.11ac IP Cameras like Hikvision PoE Texas' Gigabit "GAT" and "GAF" PoE Splitters (see below) Any IEEE 802.3af or 802.3at Device Compatible PoE splitters sold by PoE Texas GAT-USBC...

  • Brand: WiFi-Texas
  • ASIN: B07C9FG2Y2
  • UPC: 722512407831

TRENDnet Gigabit Power Over Ethernet (PoE) Injector, Full Duplex Gigabit Speed Supported, Network PoE Devices up to 100 M (328 Ft.), 15.4 Watts, Auto-MDIX in/Out, Plug & Play, TPE-113GI

TRENDnet Gigabit Power Over Ethernet (PoE) Injector, Full

TRENDnet’s Gigabit PoE Injector, model TPE-113GI, combines electrical power with a Gigabit network connection. Auto-sensing technology conveniently delivers the correct wattage needed to power your PoE devices. Connect the injector to a non-PoE Gigabit switch and then run an Ethernet cable with data + power to network a PoE device up to 100 meters (328 ft.) away. PoE Supplies a PoE device with PoE (15.4W) power.HDMI PortConnect an HDMI monitor to the TUC-DS1 to add a high definition display to your workstation. Installation Flexibility Wall-mountable design accommodates most installation scenarios. Gigabit SpeedsFull Duplex 2Gbps Ethernet speeds with this PoE injector. Package Contents:- TPE-113GI- Quick Installation Guide- Power adapter (54V DC, 0.4A)

  • Brand: TRENDnet
  • ASIN: B007Q87KP2
  • UPC: 710931505146

Y-Axis Wall Plug PoE Injector Power Over Ethernet Supply 802.3af 48V 24W 0.5A for Security IP Camera

Y-Axis Wall Plug PoE Injector Power Over Ethernet

Be Aware the FAKE seller "PLUSPOE" & "TechTech" !!!!!! ☀️☀️Applications: ☀️☀️ IP Phone Wireless Access point and client devices Security IP Camera Systems ☀️☀️Specifications: ☀️☀️ Output: 48V DC 500mA - Please do not order if your unit requires more than 500 MilliAmps Input: 100-240V 50/60HZ Output: 48V-0.5A Input Current: 1A Efficiency: 80% Min Line / Load Regulation: 3% / 5% Ripple / Noise: 200mV p-p Turn-On Delay: 2 Seconds Max Rise Time: 40 mS Max Protections: Auto Recover Over-Voltage, Short Circuit, Over-Current Operating Temperature: -10 to +40℃ (14 to +104℉) Operating Humidity (RH): 5% - 90% Storage Temperature: -20 to +85℃ (-4 to +185℉) Network Connector Type: RJ45 Shielded POE Type: Passive POE ( Pins 4,5 V+, Pins 7,8 V-)

  • Color: Black (5 Sets)
  • Brand: Y-Axis
  • ASIN: B01MQ4102S
  • UPC: 602456444362

iCreatin 48V19W Wall plug Gigabit Power over Ethernet POE Injector Power supply,1000Mbps IEEE 802.3af Compliant, Up to 100 Meters (328 Feet)

iCreatin 48V19W Wall plug Gigabit Power over Ethernet

" Note: This PoE injector work for 10/100/1000Mbps Gigabit network. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads over 400mA and high voltages exceeding 54V. Specifications 2 Gigabit Ethernet ports 48-52V output voltage , ...

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00ZYX0IQO
  • UPC: 708191202950

GPOE-1B-48v15w | Gigabit PoE Injector for Power Over Ethernet with 15 Watts of Power at 48 Volts for 802.3af Devices - Always On

GPOE-1B-48v15w | Gigabit PoE Injector for Power Over

The GPOE-1B-48v15w instantly adds gigabit PoE to any network switch or router. With proven reliability since 2012 this PoE injector adds 10/100/1000 gigabit data and power on to a single Ethernet cable to provide power and data to one device. Use this product to power IEEE 802.3af devices like IP Phones, WiFi access points and more. *NOTE: This is not a switch - you use it to add PoE to any switch or router. Features Extend power up to 328 feet (100 meters) 10/100/1000 gigabit data capability Powers any 802.3af device Mode B operation using pins (+45, -78) - passive "always on" power (no auto negotiation) Can be used for products labeled "12V DC, PoE" contact us for more details Power supply included - 48 volts DC, .3 amp, 15 watts. UL/CE/FCC certified - 110 to 220 volt AC operation and 90% efficient Other products available from PoE Texas Multiport injector options: GPOE-4A-48v48w - 4 port gigabit injector with 48 watt power supply GPOE-6AB-48v60w - 6 port gigabit injector with 60 watt power supply GPOE-8A-48v120w - 8 port gigabit injector with 120 watt power supply 10/100 capability: POE-1-48v15w - Single port injector with 10/100 data capability POE-8-48v60w - 8 Port injector with 10/100 data (Top Seller)Other Products GPOES-8-7AB-48v60w - 8 port integ...

  • Color: Gigabit 10/100/1000 Mbps
  • Brand: WiFi-Texas
  • ASIN: B0153STO2S
  • UPC: 752423138128

Ubiquiti Networks POE-24-12W-G PoE Injector, 12W, Black

Ubiquiti Networks POE-24-12W-G PoE Injector, 12W,

Specific PoE adapters are designed to work with the Air Gateway. You can deploy the Air Gateway indoors to connect wireless client devices.

  • Color: Black
  • Brand: Ubiquiti Networks
  • ASIN: B01DW99IPS
  • UPC: 602003746864

iCreatin Gigabit PoE Injector for Power over Ethernet with 24 Watt, Up to 328 Ft, PSE-480040G

iCreatin Gigabit PoE Injector for Power over Ethernet

Note: The PSE-480040G works for Gigabit 803.2af PoE Devices in 1000Mbps Networks. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. It is also protect your products from overloads and high voltages . Specifications 2 Gigabit Ethernet ports 48-55V output voltage , up to 24W ...

  • Color: Black
  • Brand: iCreatin
  • ASIN: B01C717PZW
  • UPC: 708191202103

iCreatin Gigabit Power over Ethernet Plus PoE+ Injector Adapter 35 Watts 802.3at /af, Up to 100 Meters (328 Feet), PSE-480080G

iCreatin Gigabit Power over Ethernet Plus PoE+ Injector

" Note: This PSE-480080G works for 10/100/1000Mbps Gigabit network and PoE enabled devices. The iCreatin PoE Injector can save you money by using an existing Ethernet line to deliver data and power. The iCreatin PoE Injector can easily connect any IEEE 802.3af/at-compliant device to a non-PoE LAN switch port. This PoE Injector can be used to connect a wireless access point, IP phone, network camera, or any IEEE 802.3af/at powered device to a LAN switch. Reduce Wiring Costs With the iCreatin PoE Injector you can dramatically reduce wiring costs by powering devices through your existing Ethernet line rather than running new AC power lines. To use this PoE injector, all you need to do is connect the iCreatin PoE Injector to the LAN switch port, and then use your existing Ethernet Cable to deliver DC power and data to your device. Protect Your Equipment Now that you are running DC power to your networked equipment through the Cat5 cabling, you need to be sure that your devices are protected from power problems. The iCreatin PoE Injector is designed with short circuit protection Over Current and Over Voltage Protection, keeping your devices safe. Specifications 2 Gigabit Ethernet ports Up to 35W Rated power, Supplies PoE (15.4W) or PoE+ (30W) Power, support both IEEE802....

  • Color: Black
  • Brand: iCreatin
  • ASIN: B00NRF9GQO
  • UPC: 701936097903

Ubiquiti Networks POE-50-60W POE External Injector

Ubiquiti Networks POE-50-60W POE External

Ubiquiti POE-50-60W Power over Ethernet Injector - 110 V AC, 220 V AC Input - 50 V DC Output - 1 Ethernet Input Port(s) - 1 Ethernet Output Port(s) - 60 W

  • Color: black
  • Brand: Ubiquiti Networks
  • ASIN: B00HXT8MWE
  • UPC: 810354021237

BV-Tech Single Gigabit Port Power Over Ethernet PoE Injector - 30W - 10/100/1000Mbps - up to 100 Meters (325 Feet) - Plug and Play

BV-Tech Single Gigabit Port Power Over Ethernet PoE

The is an economical, single port, high-power 10/100/1000Mbps Poe injector. It supplies up to 30W of remote power for IP cameras, wireless access points, VoIP phones, and other Poe devices. It allows you to add additional ports to your Poe switch using a cat-5 cable (sold separately).

  • Color: Black
  • Brand: BV-Tech
  • ASIN: B005BQUNEG
  • UPC: 608866765387
Similar 48v Power Injector Results
48v Power Injector Video Reviews

Aliexpress POE Injector 48 V 0.5A + 2mp 1080P 48V 0.5a HD POE IP Camera SETUP

48v Power Injector

Bedankt voor het abonneren!

Tags:

POE Injector (AC to 48V DC) - Disassembly

48v Power Injector

Disassembly of a 48V POE Injector IN: https://amzn.to/2U6BcdF US: https://amzn.to/2HPcBUo

Tags: security camera,ip camera wiring,IP camera ethe...

✅ POE Plus injector - Cheap and works with my Cisco gear!

48v Power Injector

This cheap poe injector seems to work with all my POE devices. Watch me test my Cisco switch, voi...

Tags: 30 watt,POE,POE+,SWITCH,ACCESS POINT,VOIP PHONE...

POE Splitter Power supply module 12-48v separator combiner

48v Power Injector

Please subscribe for more useful videos about FREE Internet and WiFi Marketing http://goo.gl/uBXh...

Tags: FREE WIFI,WIFI Marketing,openwrt,wifi router,ca...

Active POE Splitter 48V DC to 12V DC (non-isolated) - Disassembly

48v Power Injector

Active POE Splitter 48V DC to 12V DC (non-isolated) - Disassembly. IN: https://amzn.to/2CJyHUS U...

Tags: power over ethernet,poe splitter,poe injector,P...