Traxxas 4725 25-T Pinion Gear, 48P

Traxxas 4725 25-T Pinion Gear,

Gear, 25-T pinion (48-pitch) / set screw. Optional Traxxas pinion gears allow you to increase or decrease the final drive ratio and tune for different applications. Larger gears will result in higher speeds while smaller gears provide more torque. These are designed for use with 48-pitch spur gears and 3mm motor shafts. Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles. This product is made from high quality materials and designed for long-lasting performance. This is replacement hardware for use on Traxxas vehicles; consult your user's manual for exact parts listings.

  • Brand: Traxxas
  • ASIN: B0006O5ND4
  • UPC: 020334472502

Hot Racing NSG25M1 25t Steel Mod 1 Pinion Gear 5mm

Hot Racing NSG25M1 25t Steel Mod 1 Pinion

25T Mod-1 Pinion Gear for use on 1/8 Scale Cars or 1/10 Scale Cars that can use Mod-1 Gearing FEATURES: Hardened steel constructionBlack in colorYOU WILL RECEIVE: One 25T Mod-1 Pinion GearOne 4x4mm Set ScrewREQUIREMENTS: Installation onto the vehicleSPECIFICATIONS: length: 12mm (0.47")Inner diameter: 5mm (0.20")CommentSome car or truck will need modification to fit

  • Brand: Hot Racing
  • ASIN: B00A2991IQ
  • UPC: 083745676334

Apex RC Products 48 Pitch 24T 25T 26T 27T Aluminum Pinion Gear Set #9752

Apex RC Products 48 Pitch 24T 25T 26T

Apex RC Products is a company of radio control hobby enthusiasts that creates and carries products we use ourselves. All of our products are high quality at a great value.

  • Brand: Apex RC Products
  • ASIN: B07D6DCGWB
  • UPC: 810718030554

Robinson Racing Products 1425 Absolute Pinion Gear 48P, 25T

Robinson Racing Products 1425 Absolute Pinion Gear 48P,

OverviewSuper hard Absolute steel pinions gears are a must for running with steel spur gears or will last and last if run with a plastic spur gear. Tooth number stamped on each pinion. 1/8 inch bore. One 5-40 set screw included. 1/16 inch allen wrench (not included) fits the 5/40 set screw.

  • Brand: Robinson Racing Products
  • ASIN: B0006O7UM6
  • UPC: 719696014252

ARRMA AR310374 Pinion Gear 48P 25T

ARRMA AR310374 Pinion Gear 48P

AR310374 AR310374 Pinion Gear 48P 25T

  • Brand: ARRMA
  • ASIN: B00GAIP5QK
  • UPC: 787793479649

48P 21T 22T 23T 24T 25T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt

48P 21T 22T 23T 24T 25T Pinion Gear

Q: Do you wanna make your RC happier? Are you looking for universal upgrade pinion gear for your RC car? A: We can help, we provide 3.175mm hole 48P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 48P 3.175mm 21T pinion gear 1 X 48P 3.175mm 22T pinion gear 1 X 48P 3.175mm 23T pinion gear 1 X 48P 3.175mm 24T pinion gear 1 X 48P 3.175mm 25T pinion gear 5 X 48P Screws 1 X Screwdriver Note: 💡【48P】is the pitch of each tooth on the pinion gear and the 21T 22T 23T 24T 25T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh. 💡【3.175mm】The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter. 💡Make sure you thread lock the grub screw. They are hard to find when they fall out. 💡Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC....

  • Color: Gold
  • Brand: MakerDoIt
  • ASIN: B07RVHN1WQ
  • UPC: 889838568193

Bobbyrc Traxxas 4725 Pinion Gear 25T 48P(2pc) 1/10 Slash 2WD Rustler Stampede Bandit VXL XL-5

Bobbyrc Traxxas 4725 Pinion Gear 25T 48P(2pc) 1/10

Fits-*****Traxxas Rustler VXL/XL-5 / Stampede VXL/XL-5 / Bandit VXL/XL-5 / 1/10 Slash 2WD / 1/16 E-Revo VXL / 1/16 Slash VXL / 1/16 Summit VXL / 1/16 Rally VXL / 1/16 Ford Mustang Boss / 1/16 Kyle Busch Race Replica and Many More

  • Brand: 1/10 Slash 2WD
  • ASIN: B076W2SVJ7
  • UPC: 605483100454

TEKNO RC LLC M5 Pinion Gear, 25T, MOD1, 5mm Bore, M5 Set Screw, TKR4185

TEKNO RC LLC M5 Pinion Gear, 25T, MOD1,

FEATURES: Ideal for 1/8 scale and other MOD1 pinion applications Constructed of CNC machined steel, lightened and hardened for durability Standard length shank Number of teeth laser etched on shaft INCLUDES: 25 Tooth Pinion Gear, M5 Set Screw SPECS: Number of Teeth: 25 Gear Pitch: MOD1 Hole Diameter (Bore): 5mm

  • Brand: TEKNO RC LLC
  • ASIN: B007KN0M94
  • UPC: 783327834144

Team Associated 1343 Factory Aluminum 25T 48P 1/8 Shaft Pinion Gear

Team Associated 1343 Factory Aluminum 25T 48P 1/8

Replace your standard pinion gears with these lightweight, hard-anodized versions for slight weight savings, quicker identification, and longer life.

  • Brand: Team Associated
  • ASIN: B01B2UFIOE
  • UPC: 784695013438

64P 21T 22T 23T 24T 25T Pinion Gear with Screw Driver for 3.175mm Shaft 1/10 RC Brushless Brush Motor by MakerDoIt

64P 21T 22T 23T 24T 25T Pinion Gear

Q: Do you wanna make your RC happier? Are you looking for universal upgrade pinion gear for your RC car? A: We can help, we provide 3.175mm hole 64P pinion gear set comes with a set screw, they work well and have a secure fit with no modification needs. Package include: 1 X 64P 3.175mm 21T pinion gear 1 X 64P 3.175mm 22T pinion gear 1 X 64P 3.175mm 23T pinion gear 1 X 64P 3.175mm 24T pinion gear 1 X 64P 3.175mm 25T pinion gear 5 X 64P Screws 1 X Screwdriver Note: 💡【64P】is the pitch of each tooth on the pinion gear and the 21T 22T 23T 24T 25T is the number of teeth on the pinion gear. You have to make sure your spur gear and pinion gear have the same pitch, or the teeth won't mesh. 💡【3.175mm】The pinion gear shaft diameter or bore is 3.175mm, make sure your RC motor shaft have the same diameter. 💡Make sure you thread lock the grub screw. They are hard to find when they fall out. 💡Larger gears will result in higher speeds while smaller gears provide more torque. For quicker acceleration go for a smaller pinion gear (with fewer teeth) and a larger spur gear (with more teeth). Your car will accelerate off the mark very quickly with more torque, and you'll also benefit from cooler running temperatures, extending the life of your motor and ESC....

  • Color: Gold
  • Brand: MakerDoIt
  • ASIN: B07RN4YJH9
  • UPC: 889838568216

Hot Racing NSG225 25t Steel 32p 0.8m Pinion Gear 5mm

Hot Racing NSG225 25t Steel 32p 0.8m Pinion

25 Tooth 32 Pitch Optional Steel Pinion Gear for 5mm shaft motorsFEATURES: CNC machined Steel Gear is then Nitride Coated to increase wear resistance, improve fatigue life, and enhance corrosion resistanBlack Aluminum base constructionYOU WILL RECEIVE: One pinion gear One set screw 4x4mmREQUIREMENTS: 2mm hex wrench to install the set screwSPECIFICATIONS: length: (24mm) diameter: (5mm)COMMENTS: 0.8 module is the same as 32 standard pitchThis gear is designed for 5mm Shaft. description revised by: KS November 10, 2012

  • Brand: Hot Racing
  • ASIN: B00A29E9EM
  • UPC: 083745568172

RCRunning M0.6 3.175mm 23T 24T 25T 26T 27T Gear with Screw for 1/10 RC Motor by

RCRunning M0.6 3.175mm 23T 24T 25T 26T 27T

Specifications:M: 0.6Teeth: 23T 24T 25T 26T 27THeight: 9mmTip diameter23T: 15mm24T: 15.6mm25T: 16.2mm26T: 16.8mm27T: 17.4mmSuitable shaft diameter: 3.175mmPackage information:Package size: 9 * 5 * 1cm / 3.5 * 2.0 * 0.4inPackage weight: 16g / 0.6ozPolybag packagePackage Including1 * M0.6 3.175mm 23T Pinion Motor Gear1 * M0.6 3.175mm 24T Pinion Motor Gear1 * M0.6 3.175mm 25T Pinion Motor Gear1 * M0.6 3.175mm 26T Pinion Motor Gear1 * M0.6 3.175mm 27T Pinion Motor Gear

  • Color: As Shown
  • Brand: RCRunning
  • ASIN: B07BLX9Q1Z
  • UPC: 190033865094

48DP Motor Pinion Gears 21T 23T 25T 27T 3.175mm Brushed Brushless Motor Pinion Gears Set for 1:10 S CS R31 SCX10 AX10 RC Drift Racing Car Off-Road Climber Short Truck

48DP Motor Pinion Gears 21T 23T 25T 27T

48DP 21T 23T 25T27T 3.175mm Brushed Brushless Motor Pinion Gears Set for 1:10 S CS R31SCX10 AX10 RC Drift Racing Car Off-Road Climber Short Truck Features: 21T 23T 25T 27T piniongears engine combination, each pinion gear are equippedwith two M3 set screws(12.9 level). Suit for 3.175mmshaft 1/10 short course truck and bigfoot. Perfect fit for 1:10S CS R31 SCX10 AX10 RC drift racing car brushless brushed motor. Good metalmaterial enables the excellent performance of the pinion gear combo Superbcraftsmanship, designed for long-lasting performance. This set ofbrushed brushless motor pinion gear can totally meet the need of RC car lovers. Anti-rusttreatment on the surface of gears. The best motor piniongears set for you to choose, you will have an unbelievable experience with it. Specifications: Teeth: 21T 23T 25T27T Material: Aluminum7075 Quantity: 4pcs Dimension: 21T Pinion Gear:9.1 * 9 mm 23T Pinion Gear:9.8 * 9 mm 25T Pinion Gear:10.8 * 9 mm 27T Pinion Gear:11.2 * 9 mm Diametral Pitch:48DP Inner holediameter: About 3.175mm Height: About 9 mm Weight: 2.1g/1pcs There might besome deviation due to manual measurement. Package Includes: 1* 48DP 21T Motor Pinion Gear 1* 48DP 23T Motor Pinion Gear 1* 48DP 25T Motor Pinion Gear 1* 48DP 27T Motor Pinion Gear 8*  Set of M3 Screws Package ...

  • Brand: Innovateking
  • ASIN: B07MR2YRQW
  • UPC: 673400158789

Tamiya America, Inc AV Pinion Gear Set 24T,25T: TT01/CR01, TAM50477

Tamiya America, Inc AV Pinion Gear Set 24T,25T:

50477 AV Pinion Gear 24T/25T 62

  • Brand: Tamiya
  • ASIN: B00061H70Y
  • UPC: 795327901030

Integy RC Model Hop-ups T3475 25T Steel Pinion Gear for 1/16 Traxxas E-Revo, Slash, Summit, Rally

Integy RC Model Hop-ups T3475 25T Steel Pinion

OVERVIEW: Our optional spur and pinion gears allow you to alter the gear ratio of your transmission to give your vehicle more low-end torque or more high-end speed simply by replacing your stock gearing with our heavy duty steel gears. Item T3475 Barcode: 91789008324

  • Brand: Integy
  • ASIN: B004GNWAGO
  • UPC: 917890083245

Hot Racing NSG825 25t Steel 48p Pinion Gear 5mm or 1/8

Hot Racing NSG825 25t Steel 48p Pinion Gear

Optional 25 Tooth 48P Optional Steel Pinion Gear for 5mm shaftFEATURES: CNC Steel Gear then Nitride to increased wear resistance, improved fatigue life, and enhanced corrosion resistant BlackBlack Steel base construction with 4mm set screw. Longer Base surface for maximum contactYOU WILL RECEIVE: One pinion gear One set screw 4x4mmOne 5mm to 1/8 conversion SleeveREQUIREMENTS: 2mm hex wrench to install the set screwSPECIFICATIONS: length: 14mm48 Pitch 25 toothdescription revised by: WP June 10, 2014

  • Brand: Hot Racing
  • ASIN: B0081V4O1Q
  • UPC: 083745633054

Robinson Racing 8725 Hard 5Mm Bore(.8) Pinion 25T

Robinson Racing 8725 Hard 5Mm Bore(.8) Pinion

The Robinson Racing Products team is dedicated to producing the finest gears and high-performance drive-related accessories available, from HARD-CORE racer to Week-End Warrior, we have you covered. All of our products are precision manufactured in the U.S.A. And have been proven on the track, off-road, and in countless back-yards so you can depend on them when it counts for maximum performance and maximum fun. We back up our confidence with more than 30 years of experience in manufacturing and racing hi-performance RC products.

  • Color: Brown/a
  • Brand: Robinson Racing Products
  • ASIN: B000CJXLY6
  • UPC: 719696087256

Foreverharbor Surpass-Hobby 48DP 5Pcs 3.175mm 21T 22T 23T 24T 25T Metal Pinion Motor Gear Combo Set for 1/10 RC Car Brushed Brushless Motor

Foreverharbor Surpass-Hobby 48DP 5Pcs 3.175mm 21T 22T 23T

Descriptions:This 48DP 21T 22T 23T 24T 25T motor pinion gear combo set is made of high quality aluminum 7075,which is suit for brushed/brushless motor.Features:Small and light weigh,easy to install and operate.Suit for 1/10 RC brushed/brushless motor car.High quality aluminum 7075,hard anodized on the gear surface,more durable and wear-resistant.5Pcs set gives you more choice and make your RC car have best performance.A m3 set screw (12.9 level) has been added to each pinion gear.Specifications:Brand: surpass-hobby Teeth: 21T 22T 23T 24T 25THeight: 9mmGear Diameter21T: 12mm22T: 12.5mm23T: 13mm24T: 13.5mm25T: 14mmDiametral Pitch: 48DPSuitable shaft diameter: 3.175mmMaterial: Aluminum 7075Quantity: 5PcsNotice:the car in the picture is not included.Package Information:Package size: 9 * 6 * 1.5cm / 3.5 * 2.4 * 0.6inPackage weight: 13g / 0.44ozPolybag packagePackage List:1 x 21T Gear1 x 22T Gear1 x 23T Gear1 x 24T Gear1 x 25T Gear5 x Screws

  • Color: Gray
  • Brand: Foreverharbor
  • ASIN: B07R44G7SQ

Team Losi Racing 48P Aluminum Pinion Gear, 25T, TLR332025

Team Losi Racing 48P Aluminum Pinion Gear, 25T,

Team Losi Racing Aluminum 48 Pitch Pinion Gear. This gear is the perfect choice for any Team Losi Racing 1/10 scale vehicle that uses 48 pitch gears. This pinion gear has been machined from high quality aluminum, and hardcoated for durability. Choose from multiple tooth count options to fine tune the gear ratio of your vehicle. Package includes one pinion gear and one set screw.

  • Brand: Team Losi Racing
  • ASIN: B00AYGM2N8
  • UPC: 605482091135

Hot Racing NSG3225 25t Steel 32p Pinion Gear 5mm Bore

Hot Racing NSG3225 25t Steel 32p Pinion Gear

Hot Racing hardened steel 25tooth, 32 pitch pinion gear for motors with a 5mm shaftFEATURES: - CNC machined- Hardened steel to increased wear resistance and improve fatigue life- Nitrided to enhanced hardness corrosion resistanceYOU WILL RECEIVE: - One (1) pinion gear - One (1) M4x4mm setscrewREQUIREMENTS: - 2mm hex wrench to install setscrew- Removable thread lock (ex. blue Loctite) for setscrew- Motor with 5mm shaft- 32 pitch spur gearSPECIFICATIONS: - Tooth count: 25- Tooth pitch: 32 pitch- Tooth face width: 7mm- length: 14.5mm- For shaft: 5mmComment0.8 module is the same as 32 standard pitch

  • Brand: Hot Racing
  • ASIN: B07M7FKBWV
  • UPC: 083745294668
Similar 25t Pinion Gear Results
25t Pinion Gear Video Reviews

Speed Run with optional 25t pinion gear

25t Pinion Gear

I wanted to see if the speed chart was accurate. I attempted to reach 50+ speeds by changing out ...

Tags: Sony,Action camera,POV camera,Sony Action Cam,A...

Vorza flux upgrade part 2 and review 25t pinion and 44t spur gear.

25t Pinion Gear

Hpi vorza flux rc car.

Tags:

Traxxas Rustler Gearing 101 Gearing tips for Rustler

25t Pinion Gear

Traxxas Rustler Gearing 101 Gearing tips for Rustler http://www.traxxas.com/

Tags: RC

RC SPEED WEEK #16 - HoBao Hyper VT 44T Spur 25T pinion

25t Pinion Gear

RC SPEED WEEK #16 - HoBao Hyper VT 44T Spur 25T pinion Unboxing: HoBao Hyper VT 1/8 Scale Road C...

Tags:

Hpi vorza flux stage 1 speed upgrade 25t pinion and 48t spur gear and more.

25t Pinion Gear

Tags: